You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Hybrid Ceramic Matrix Composite/Polymer Matrix Composite (CMC-PMC) Skin Materials

    SBC: TRITON SYSTEMS, INC.            Topic: N18AT024

    Triton Systems, Inc. proposes to develop an affordable, lightweight and durable hybrid composite system for next generation structural frame composites that will survive both short- and long-term thermal and chemical exposure and abrasive conditions. The team will develop a hybrid materials system that is an improvement on traditional carbon fiber reinforced polymer (CFRP) systems in performance a ...

    STTR Phase II 2019 Department of DefenseNavy
  2. Mine Target Reacquisition for Next Generation Mine Neutralization Systems (Sonar SLAM)

    SBC: PHYSICAL SCIENCES INC.            Topic: MDA12T001

    The US Navy is moving towards a Single Sortie Detect to Engage (SSDTE) paradigm to implement in-stride minehunting and mine prosecution. Integrating in-stride Mine Search and Mine Prosecution functions is a key requirement to achieve the SSDTE paradigm. Mine Target Reacquisition between the mine search operations and mine prosecution phases poses a particular challenge, as planned mine prosecution ...

    STTR Phase II 2019 Department of DefenseNavy
  3. High Throughput Testing of Additive Manufacturing

    SBC: MRL MATERIALS RESOURCES LLC            Topic: N18AT028

    Additive manufacturing is a disruptive new manufacturing paradigm that hold tremendous potential for creation of novel designs and introduction of novel new alloy systems. However, much of this potential remains unrealized due to a lack of robust material properties databases. Accurate calibration of materials models and robust part qualification and certification regimes both will require massive ...

    STTR Phase II 2019 Department of DefenseNavy
  4. Detect and Avoid Certification Environment for Unmanned Air Vehicles (UAVs)

    SBC: RDRTEC INCORPORATED            Topic: N18AT007

    The objective of this project is to develop a comprehensive suite of tools, called the DAA Radar Software Suite and Simulation (DAA-RSSS), that supports future Navy procurement and certification of non-cooperative sensor technologies for Detect And Avoid (DAA) as well as develop plans to support EO/IR sensors as the non-cooperative sensor as informed by FAA activities in developing Minimum Operati ...

    STTR Phase II 2019 Department of DefenseNavy
  5. Information-based Norms on Flow, Operations and Traffic Over Networks (INFOTON)

    SBC: ISEA TEK, LLC            Topic: N18AT027

    The Internet of Things (IoT) connects people, data, and "things" (e.g., software, sensors, platforms), facilitating the translation of information into actions. Although naval platforms’ networks and communication suites have evolved significantly in the past few years to support such required connectivity, one of the greatest technical challenges still facing the military community is the proce ...

    STTR Phase II 2019 Department of DefenseNavy
  6. The Enhanced Navy Simulation of the Extended MBL Environment (ENSEMBLE) Toolkit

    SBC: SPECTRAL SCIENCES INC            Topic: N17AT018

    The recent emergence of many new ocean-transiting military and domestic security threats has led to a growing need within the Department of Defense in general and within the Department of the Navy in particular for improved methods for estimating the electromagnetic vulnerability to visual/electro-optical/infrared/radar systems. Accurate characterization of the marine boundary layer (MBL) in the v ...

    STTR Phase II 2019 Department of DefenseNavy
  7. Multi-vehicle Collaboration with Minimal Communications and Minimal Energy

    SBC: ORBIT LOGIC INCORPORATED            Topic: N17AT029

    Orbit Logic,the University of Colorado, and the University of California are developing a hierarchical autonomous mission planning and response capability for Autonomous Underwater Vehicles (AUVs) to address the challenges associated with long duration operations. The research is innovating approaches to the exchange of information between collaborating vehicles enabling onboard decision-making to ...

    STTR Phase II 2019 Department of DefenseNavy
  8. Additive Manufacturing for Li-Ion Batteries (Phase II)

    SBC: PHYSICAL SCIENCES INC.            Topic: N18AT008

    Physical Sciences Inc. (PSI) will construct and demonstrate Li-ion cells for Naval Aviation applications using solvent free additive manufacturing techniques. Lithium-ion batteries simultaneously offering high energy and power density will be demonstrated using novel solvent-free electrode feedstocks. PSI will work with the Complex Fluids Lab (CFL) at the University of Connecticut to optimize the ...

    STTR Phase II 2019 Department of DefenseNavy
  9. Low Cost Magnetic Sensor for Mine Neutralizer Identification and Charge Placement

    SBC: QUSPIN INC.            Topic: N17AT013

    Optically pumped magnetometers provide very high performance but they cost tens of thousands of dollars, and they are large and power hungry. Recently we successfully developed and commercialized laser pumped magnetometers with size, weight and power consumption that is an order of magnitude below current state-of-the-art without sacrificing performance. In this project, the focus will be on produ ...

    STTR Phase II 2019 Department of DefenseNavy
  10. TOPMAST II- Repurposing Computational Analyses of Tactics for Training Assessments

    SBC: APTIMA INC            Topic: N18AT003

    As the complexity of threats and emerging warfare capabilities increase, so do the number of Tactics, Techniques, and Procedures (TTPs) and the corresponding training regimes. Instructors are increasingly in need of automated tools to enable training that scales with complexity. Aptima, Inc., and our partners, Aviation Systems Engineering Company, Inc. (ASEC) and the University of Southern Califor ...

    STTR Phase II 2019 Department of DefenseNavy
US Flag An Official Website of the United States Government