You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. A Concrete Additive Manufacturing Process for Fixed and Floating Wind Turbine Foundations and Towers

    SBC: JC Solutions            Topic: 14b

    Tall towers and foundations for modern offshore and land-based wind turbines are too large to transport over roads or rail due to their extremely large dimensions. Existing “one-off” on-site construction methods are too expensive, and are too slow for manufacturing foundations and towers in the large numbers needed, especially for offshore components manufactured in ports with limited lay-down ...

    STTR Phase I 2018 Department of Energy
  2. A cost-effective bioreactor to advance functional tissue engineering of cartilage

    SBC: APEX BIOMEDICAL COMPANY, LLC            Topic: NIAMS

    DESCRIPTION (provided by applicant): Osteoarthritis (OA) is the leading cause of chronic disability in the United States. A clinical goal in the treatment and prevention of OA is to develop replacement cartilage using tissue engineering (TE) technologies. Although TE cartilage presently lacks the mechanical stability of native cartilage, studies have demonstrated that mechanical stability can be e ...

    STTR Phase I 2010 Department of Health and Human ServicesNational Institutes of Health
  3. ADA Conformable Wearable Battery-Hybrid Electrical Energy Storage System: A Rechargeable, Safe and High Performance Energy Storage Solution

    SBC: ADA Technologies, Inc.            Topic: A15AT010

    ADA Technologies, Inc. proposes to transition our previously developed BB-2590 Hybrid Electrical Energy Storage System (HEESS) architecture into a Conformable Wearable Battery format, or CWB-HEESS (Figure 1). We seek to satisfy a meaningful, Army Program Executive Office (PEO) Soldier need for a rechargeable, safe and high energy CWB. We anticipate the CWB-HEESS will have broad U.S. Dept. of Defen ...

    STTR Phase II 2018 Department of DefenseArmy
  4. Additive Manufacturing of Metallic Materials for High Strain Rate Applications

    SBC: MRL MATERIALS RESOURCES LLC            Topic: MDA17T001

    Metallic additive manufacturing (AM) is an attractive technology for the production of lethality test articles due to the potential for significantly reduced lead time and manufacturing cost.However, in order to be effective in providing accurate lethality data, the properties of the AM material have to match closely the properties of conventionally manufactured alloys found in real threat targets ...

    STTR Phase I 2018 Department of DefenseMissile Defense Agency
  5. Additive Manufacturing of Multifunctional Nanocomposites

    SBC: Sciperio, Inc.            Topic: A13AT010

    Sciperio with team members Georgia Institute of Technology and Centecorp have teamed up to develop an Additive Manufacturing Composite using nano and micro fillers. The team will develop multi-scale models that are supported by experimental characterization for advanced 3D Printable materials. Inelastic response of high strength hierarchical structures composed of engineered materials and specif ...

    STTR Phase I 2013 Department of DefenseArmy
  6. Additive Manufacturing of Scalable 3D Resonators

    SBC: Global Research and Development Inc.            Topic: 29b

    This proposal is submitted in response to the SBIR/STTR Office of Science related to Quantum Information Science (QIS) Supporting Technologies. There is the need for fabrication techniques for scalable 3D Superconducting Radio Frequency (SRF) Structures for Quantum Information Systems. In this proposal we will develop an additive manufacturing approach to developing superconducting 3D microwave re ...

    STTR Phase I 2018 Department of Energy
  7. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: ARCTOS Technology Solutions, LLC            Topic: DLA18A001

    Universal Technology Corporation (UTC) has teamed with the University of Dayton Research Institute (UDRI), Stratonics, and Macy Consulting to demonstrate not only the transitionability into commercial systems, but also to develop the data analytics and monitoring and control requirements to extract the full value fromseveral sensors, including the Stratonics ThermaViz, acoustic and profilometry se ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  8. A 3D Printed Resorbable Antimicrobial Envelope to Prevent Infection of Implanted Cardiac Devices

    SBC: N8 MEDICAL INC            Topic: NHLBI

    ABSTRACT Infection is a serious and potentially fatal complication of surgery to deliver cardiovascular implantable electronic devicesCIEDsi epacemakers and implantable cardioverter defibrillatorsUntreated device related infection is associated with mortality rates as high asCurrentlyonly one antibiotic impregnated mesh has been FDA approved for placement in surgical incisions to reduce infections ...

    STTR Phase I 2018 Department of Health and Human ServicesNational Institutes of Health
  9. Advanced Materials for the Design of Lightweight JP5/JP8/DS2 Fueled Engines for Unmanned Aerial Vehicles (UAVs)

    SBC: Northwest Uld, Inc.            Topic: N10AT001

    Northwest UAV Propulsion Systems proposes using our purpose built heavy fuel engine designed and built in the USA for small unmanned aerial systems in the tier 2 & 3 class. We will be adding a lightweight ceramic material set combined with FEA (Finite Element Analysis) and heavy fuel atomizer (IRAD Project) to create a lightweight engine for a SUAS or STUAS class UAVs. The Ceramic material set is ...

    STTR Phase I 2010 Department of DefenseNavy
  10. Advanced Membranes for CO2 Capture from Existing Coal-fired Power Plants

    SBC: Nextech Materials, Ltd.            Topic: 24a

    Coal is an abundant source of energy in the USA, but is not currently utilized effectively. Recently, the DOE has begun a carbon sequestration program is to develop advanced CO2 capture and compression technology for existing coal-fired plants with increased efficiency with no more than a 35% increase in the cost of electricity. This will require new approaches and technologies to be successful. N ...

    STTR Phase I 2010 Department of Energy
US Flag An Official Website of the United States Government