Award Data

Sensatek Propulsion Technology, Inc. proposes to demonstrate the feasibility of a wireless, passive, nanoparticle-based sensor system. The sensor in its current form can be used to measure real time temperatures and pressures wirelessly without the need of an external energy source. It should be noted that the same sensing principle can be used for strain monitoring as well. It comprises of a micr ...

Opterus Research and Development, Inc. proposes to develop and validate multi-scale thin-ply High Strain Composites (HSCs) constitutive modeling tools for incorporation into commercial finite element analysis codes. The constitutive models will capture the time-temperature-load-deformation viscoelastic characteristics common to HSCs as well as the yielding or permanent deformation associated with ...

Regenerative space life support will undoubtedly require food production, to recover nutrients and close the carbon loop in a spacecraft habitat. Aquatic plants have enormous potential for edible biomass production but have been little studied as potential food crops for space applications. The proposed μG-LilyPond™ is an autonomous environmentally controlled floating plant cultivation system ...

The Keystone and MSU team propose to build on the successful feasibility demonstration conducted during Phase I to complete the development of solid-state joining of high strength and temperature alloys utilizing the Thermal Stir Welding process. The focus alloy for this project is Haynes 230; the alloy of choice typically utilized in rocket engine nozzel skirts. This class of alloy is difficult t ...

The goal of the proposed Phase I work is to demonstrate the feasibility of the coordination and control of a low cardinality (n=12) swarm of smallsats that realizes a distributed Synthetic Aperture Radar (SAR) in low Earth orbit. Preliminary mission and spacecraft design work has shown that the swarm can support SAR imaging in the L-band (1.35 GHz) with a ground range resolution finer than 10 m wi ...

With the capacity and performance of FPGAs suitable for space borne applications continuously increasing, the design of FPGAs is becoming increasingly complex involving trading off or simultaneous optimization of space, speed, and power. RNET and ANL are proposing to develop software infrastructure that facilitates automatic performance tuning of FPGAs in terms of speed, power, and size. We introd ...

Among numerous technological advances sought in order to facilitate human space travel, innovations are needed that supports the mass- and energy-efficient maintenance of closed air, water, and waste systems in spacecraft habitats that operate on planetary environments such as Mars and within microgravity. Waste-water treatment system on board the ISS is one such system that has lifetime/durabilit ...

Computational tools that accurately predict the performance of electric propulsion devices are highly desirable by NASA and the broader electric propulsion community. Large investments in running the long duration test programs (> 20 kHrs) at NASA GRC can be reduced with computer models and allow more focus on exploring the NEXT ion thruster design for future space missions. The current state of e ...

Project involves development of new flexible FR polyurethane (PU)insulation foams through a non-toxic environmentally friendly composite approach. Foams have bound-in polymeric phosphonate FRs, with added synergists and smoke suppressants. Such foams will not leach FR. Foams have fine cell structure and excellent flexible foam properties. Cone performance of the identified foam family (368 peak ...

The innovation proposed here is a novel multi-scale coupling methodology implemented in the Loci-STREAM CFD code, for developing a high-fidelity, high-performance multiphase combustion modeling capability to enable accurate, fast and robust simulation of unsteady turbulent, reacting flows involving cryogenic propellants (such as LOX/Methane) in liquid rocket engines (LREs). During Phase 1 work, a ...