You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. A Scalable Event Extractor for Multi-Level Event Data and Pattern Archiving: SEE

    SBC: Intelligent Automation, Inc.            Topic: N17AT022

    To address the need of auto-extracting data relevant to significant events and to archive patterns, Intelligent Automation, Inc. (IAI) team proposes to continue developing a Scalable Event Extractor for Multi-Level Event Data and Pattern Archiving: SEE. The key innovations of our proposed SEE system are (1) a large class of analytics that extract valuable and important information from raw data, a ...

    STTR Phase II 2018 Department of DefenseNavy
  2. TOME: Tools for Objective Measurement and Evaluation

    SBC: Aptima, Inc.            Topic: N16AT002

    The introduction of new systems and technologies is critical for maintaining superiority, yet this brings with it uncertainty regarding the impact on users, teams, and organizations. Rigorous test and evaluation (T&E) practices are essential prior to acquiring and instituting new technologies, particularly to objectively assess the workload imposed on end users. Aptima, Inc. and its partners – S ...

    STTR Phase II 2018 Department of DefenseNavy
  3. Optimized High Performance Stainless Steel Powder for Selective Laser Melting Additive Manufacturing (AM)

    SBC: Shepra, Inc.            Topic: N16AT007

    Stainless steel is a vital component of many air, land and sea systems that support the Navy warfighter. In particular, 17-4 precipitation hardened stainless steel, (17-4 PH SS) with its extrodinary combination of strength, ductility, high temperature performance and corrosion resistance plays an important role in supporting the warfighter. When processed conventionally, 17-4 PH SS typical exhibit ...

    STTR Phase II 2018 Department of DefenseNavy
  4. MDCT Quantification of hepatic tumor viability for assessment of cancer therapy

    SBC: IQ Medical Imaging LLC            Topic: 102

    Project SummaryAbstract Tumor imaging quantification is critical for diagnosisstagingand treatment evaluationand multi detector CTMDCTis the clinical imaging modality commonly used for patients diagnosed with hepatic malignancy because of its relatively low cost and wide availabilityConventional tumor quantification using either linear or volumetric measurement has demonstrated significant limitat ...

    STTR Phase II 2018 Department of Health and Human ServicesNational Institutes of Health
  5. Quantifying Uncertainty in the Mechanical Performance of Additively Manufactured Parts Due to Material and Process Variation

    SBC: MRL MATERIALS RESOURCES LLC            Topic: N16AT004

    Additive manufacturing is an extremely customizable process; however, variations in the chosen build parameters can lead to drastic differences in part performance. The performance variation due to process parameters is still not well understood, and propagating all uncertainties from the various sources has been a challenge. Sources of AM parts’ performance variability include uncertainties in ...

    STTR Phase II 2018 Department of DefenseNavy
  6. Cuff Electrodes with Soft Wire Electrical Leads

    SBC: TDA Research, Inc.            Topic: 102

    Project Summary AbstractDevelopment of a Nerve Cuff Electrode from Soft and Elastomeric Conducting Wires STTR Phase I ApplicationPIBrady ClapsaddleTDA ResearchIncBio electronic interfaces are used in a wide array of applications for recording and providing electrical impulses to treat diseaseOne common interface device for the PNS is the cuff electrodeCurrent cuff electrodes have many failure mode ...

    STTR Phase I 2018 Department of Health and Human ServicesNational Institutes of Health
  7. Wireless Non-Invasive Advanced Control of Microprocessor Prostheses and Orthoses

    SBC: LIBERATING TECHNOLOGIES INC            Topic: DHP17A005

    There are several current and imminent orthotic and prosthetic (O&P) fitting scenarios that would greatly benefit from the ability to wirelessly collect and transmit physiological information from the user. Both upper- and lower- limb O&P fittings that: 1) use osseointegration, 2) have cable management issues, and 3) could benefit from physiological information from locations proximal to the prost ...

    STTR Phase II 2018 Department of DefenseDefense Health Agency
  8. RASP- Automated Scoring Program for Rodent Ultrasonic Vocalizations (USVs)

    SBC: Mide Technology Corporation            Topic: DHP16C003

    Rodents serve as models for the human brain and behavior, and their calls give researchers a window into their mood. Unfortunately, rodent calls are ultrasonic, so a researcher must record a test and then play the audio back at a slower speed to manually categorize and count calls. Software does exist to accomplish this task, but it does not have the ease of use or accuracy that researchers want. ...

    STTR Phase II 2018 Department of DefenseDefense Health Agency
  9. Portable, Non-Contact, Quantitative, Physiology and Health Assessment Imaging System

    SBC: Bodkin Design & Engineering, LLC            Topic: DHP16C005

    Accurate assessment of burn depth and surface area are important to clinical decision-making regarding treatment. Initial assessment determines fluid requirements and transportation decisions to distant-care facilities. The clinician must determine if the wound will heal itself or whether excision and grafting are necessary for optimal wound healing. The standard of care remains visual inspection ...

    STTR Phase II 2018 Department of DefenseDefense Health Agency
  10. Principled Design of an Augmented Reality Trainer for Medics

    SBC: Unveil LLC            Topic: DHP17A003

    Augmented reality (AR) offers the ability to enhance existing combat medic training by including perceptual cues and adaptive training elements to traditional simulation-based training using manikins. Unveil has developed a training system called the Macrocognitive AR Trainer (MART). MART is designed to foster the development of macrocognitive skills (e.g., sensemaking, assessment skills, mental m ...

    STTR Phase II 2018 Department of DefenseDefense Health Agency
US Flag An Official Website of the United States Government