You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY22 is not expected to be complete until September, 2023.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Circulating Diagnostic Markers of Infectious Disease

    SBC: PATHOVACS INCORPORATED            Topic: CBD18A001

    The focus of this STTR phase I component is on proof-of-concept studies demonstrating applicability of technical approaches for identificationof circulatory diagnostic markers for infectious disease. Therefore, the primary objective of this project is to determine feasibility of one suchtechnical approach called Proteomics-based Expression Library Screening (PELS), for identification of pathogen-d ...

    STTR Phase I 2018 Department of DefenseOffice for Chemical and Biological Defense
  2. Virus-Like Particle Based pan-Marburgvirus Vaccine

    SBC: Luna Innovations Incorporated            Topic: CBD18A002

    Marburg virus (MARV) is a filamentous enveloped non-segmented negative sense RNA virus. This viruse is considered to be extremelydangerous with case fatality rates as high as 88-90%. Extensive efforts have gone towards effective vaccines for MARV prevention, however,none have been successfully established as licensed vaccines. Glycoprotein (GP) is the only surface protein of MARV. There are substa ...

    STTR Phase I 2018 Department of DefenseOffice for Chemical and Biological Defense
  3. Advanced Rocket Trajectory Propagation Techniques

    SBC: Reservoir Labs, Inc.            Topic: MDA17T002

    Reservoir Labs and Johns Hopkins University will develop alternative numerical solution techniques that improve computational loading, data storage, and data integrity for rocket vehicle trajectory modeling in MDA federated simulations.The objective of this program is to develop new techniques for trajectory propagation that are more suited for use in federated simulations than traditional methods ...

    STTR Phase I 2018 Department of DefenseMissile Defense Agency
  4. Test Article Printing with Laser Additive Manufacturing (TAP-LAM) for Threat Surrogate Target Production

    SBC: MV Innovative Technologies LLC (DBA: Opt            Topic: MDA17T001

    Optonicus proposes development of the TAP-LAM (Test Article Printing with Laser Additive Manufacturing for Threat Surrogate Target Production) powder bed fusion and directed energy depositions systems. The TAP-LAM metal additive manufacturing system will advance strategic missile defense system testing capabilities by improving 3D printing methods to rapidly produce large-scale threat surrogate ta ...

    STTR Phase I 2018 Department of DefenseMissile Defense Agency
  5. Additive Manufacturing of Metallic Materials for High Strain Rate Applications

    SBC: MRL MATERIALS RESOURCES LLC            Topic: MDA17T001

    Metallic additive manufacturing (AM) is an attractive technology for the production of lethality test articles due to the potential for significantly reduced lead time and manufacturing cost.However, in order to be effective in providing accurate lethality data, the properties of the AM material have to match closely the properties of conventionally manufactured alloys found in real threat targets ...

    STTR Phase I 2018 Department of DefenseMissile Defense Agency
  6. Lightweight Magnesium Components of a Missile Body

    SBC: Terves LLC            Topic: MDA17T004

    Magnesium alloys have 35% lower density compared to aluminum, with improved temperature stability compared to high strength aluminum.They can also be fabricated with minimum gauge thicknesses considerably thinner than fiber composites, and are weldable, with much higher impact resistance.Traditional magnesium alloys, however, have had lower strengths than more developed aluminum alloys.Powder meta ...

    STTR Phase I 2018 Department of DefenseMissile Defense Agency
  7. Innovative Methodologies for Manufacturing of Lethality Test Articles

    SBC: MATSYS INC            Topic: MDA17T001

    The experimental validation of the DoDs weapon systems is at the cornerstone of national security considerations. The structural requirements for the targets utilized impose a severe cost and lead time burden due to the limitations imposed by the traditional manufacturing processes currently used. Novel manufacturing methods for metal alloys have been established in the past years, but they have y ...

    STTR Phase I 2018 Department of DefenseMissile Defense Agency
  8. Verification and Validation of Physics Based DPAL Models

    SBC: AEROSOFT INC            Topic: MDA12T008

    AeroSoft, with the USAFA Laser and Optics Research Center proposes to create an extensive and thorough Verification and Validation (V & V) Program for anchoring physics based modeling software for static and flowing DPAL systems. During Phase I, a review of existing experimental programs will made and used for preliminary validation with the GASP software suite. Once deficiencies in the current e ...

    STTR Phase I 2013 Department of DefenseMissile Defense Agency
  9. M&S Uncertainty Quantification

    SBC: OPTIMIZATION TECHNOLOGIES, INC.            Topic: MDA12T007

    OptTek Systems, Inc (OptTek), proposes an affordable, effective UQ capability for both legacy and new BMDS M & S. The OptTek Team includes research institution partner Oak Ridge National Laboratory (ORNL) and subcontractor RTSync Corporation (RTSync). The proposed BMDS M & S UQ capability maximizes insertability into existing and future MDA BMDS M & S-supported Event processes, analysis methods, a ...

    STTR Phase I 2013 Department of DefenseMissile Defense Agency
  10. EOIR Fusion during Ascent Phase for C2BMC

    SBC: Vectraxx, Inc.            Topic: MDA12T004

    In this Phase I STTR project for MDA, Vectraxx of Glen Allen, Virginia will address the critical problem of dealing with pre-intercept debris fields and launch family clusters as seen by IR sensors. This is an essential element to the ascent phase component of the MDA"s Ballistic Missile Defense System. The objective of this R & D effort is to characterize pre-intercept debris field and leverage ...

    STTR Phase I 2013 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government