List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. THE POWDER METALLURGY PROCESS (PM) IS A COST EFFECTIVE MEANSTO PRODUCE A VARIETY OF METAL PRODUCTS HOWEVER TOOLING COSTSAND GEOMETRIC CONSTRAINTS SEVERLY RESTRICT PART GEOMETRY ANDECONOMIC PRODUCTION QUANTITIES.

    SBC: Allegheny Powder Metallurgy            Topic: n/a

    THE POWDER METALLURGY PROCESS (PM) IS A COST EFFECTIVE MEANSTO PRODUCE A VARIETY OF METAL PRODUCTS HOWEVER TOOLING COSTSAND GEOMETRIC CONSTRAINTS SEVERLY RESTRICT PART GEOMETRY ANDECONOMIC PRODUCTION QUANTITIES. A NOVEL POWDER PROCESSING TECHNOLOGY IS PROPOSED BY WHICH FULLY THREE-DIMENSIONAL PARTS CAN BE PRODUCED ECONOMICALLY IN SMALL QUANTITIES. THE PROCESS, BASED ON THE MACHINING OF COMPACTS PR ...

    SBIR Phase I 1983 National Science Foundation
  2. OCULOMETER AND AUTOMATED SPEECH INTERFACE SYSTEM

    SBC: AMERIGENICS, INC.            Topic: n/a

    N/A

    SBIR Phase I 1983 National Aeronautics and Space Administration
  3. AERONAUTICAL SYSTEMS TECHNOLOGY

    SBC: AMERIGENICS, INC.            Topic: n/a

    N/A

    SBIR Phase I 1983 Air ForceDepartment of Defense
  4. CARRIERS

    SBC: Biochem Technology Inc.            Topic: n/a

    THE IMPORTANCE OF TISSUE CULTURE IS GROWING AS NEW PRODUCTS DERIVED FROM MAMMALIAN CELLS ARE BEING INTRODUCED. THE LIMITATIONS OF EXISTING EQUIPMENT AND PROCESS TECHNOLOGY FOR THE PRODUCTION OF PRODUCTS DERIVED FROM TISSUE CULTURE IS WELL RECOGNIZED BY THE INDUSTRY. ALTHOUGH NEW APPROACHESARE BEING DEVELOPED, A PROBLEM WHICH HAS RECEIVED ONLY LIMITED ATTENTION HAS BEEN AERATION AND AGITATION IN LA ...

    SBIR Phase I 1983 National Science Foundation
  5. LIGHT SHELVES

    SBC: Burt Hill Kosar Rittelmann            Topic: n/a

    RECENT RESEARCH HAS DEMONSTRATED THAT ARTIFICIAL LIGHTING SYSTEMS ARE TYPICALLY THE MAJOR ENERGY-CONSUMING SUBSYSTEMS IN COMMERCIAL BUILDINGS. THE USE OF NATURAL LIGHTING STRATEGIES HAS THUS EMERGED AS A MAJOR DESIGN CONCEPT IN ENERGY-EFFICIENT COMMERCIAL BUILDINGS, PARTICULARLY SINCE IT ALSO PROVIDES THE ARCHITECT WITH ADDITIONAL OPPORTUNITIESTO ENHANCE THE VISUAL STIMULATION/HABITABILITY OF INTE ...

    SBIR Phase I 1983 National Science Foundation
  6. THE OBJECTIVE OF THE PROPOSED PHASE I RESEARCH PROGRAM IS TOESTABLISH THE FEASIBILITY OF OPERATING IN A DRY DENTAL FIELD, USING A SELF-COOLED DRILL WHICH DOES NOT REQUIRE A WATER SPRAY.

    SBC: Ccs Associates            Topic: n/a

    THE OBJECTIVE OF THE PROPOSED PHASE I RESEARCH PROGRAM IS TOESTABLISH THE FEASIBILITY OF OPERATING IN A DRY DENTAL FIELD, USING A SELF-COOLED DRILL WHICH DOES NOT REQUIRE A WATER SPRAY. SPECIFIC AIMS ARE TO SHOW THAT A SELF-COOLED DRILL CAN BE DESIGNED TO CONFORM TO THE REQUIREMENTS OF ACCEPTED DENTAL OPERATIVE PRACTICE, AND THAT USE OF THE DRILL WILL NOT CAUSE EXCESSIVE TEMPERATURES AND CONSEQUEN ...

    SBIR Phase I 1983 Department of Health and Human Services
  7. FRACTURE MECHANICS INVESTIGATION OF GRINDING OF CERAMICS

    SBC: Ceramic Finishing Company            Topic: n/a

    N/A

    SBIR Phase I 1983 Department of Energy
  8. PREFORMS FOR REINFORCED COMPOSITES IN SHAPES THAT HAVE EXCEPTIONAL MECHANICAL PROPERTIES, WHILE ELIMINATING ANY DELAMINATION FAILURE MECHANISM.

    SBC: The Cumagna Corpon            Topic: n/a

    PREFORMS FOR REINFORCED COMPOSITES IN SHAPES THAT HAVE EXCEPTIONAL MECHANICAL PROPERTIES, WHILE ELIMINATING ANY DELAMINATION FAILURE MECHANISM. THE PROCESS IS EXCEPTIONALLYSUITABLE FOR THE MANUFACTURE OF LIGHT WEIGHT, HIGH PERFORMANCE STRUCTURAL MEMBERS FOR CORPS OF ENGINEERS REQUIREMENTS-LIGHT WEIGHT, MOBILITY, HIGH PERFORMANCE. PHASE I WILL GENERATE THE MECHANICAL PROPERTIES OF A SERIES OF MAGNA ...

    SBIR Phase I 1983 ArmyDepartment of Defense
  9. FABRICATING STRUCTURAL ELEMENTS, SUCH AS I-BEAMS, FROM FIBERREINFORCED COMPOSITE MATERIALS.

    SBC: The Cumagna Corpon            Topic: n/a

    FABRICATING STRUCTURAL ELEMENTS, SUCH AS I-BEAMS, FROM FIBERREINFORCED COMPOSITE MATERIALS. THESE ELEMENTS ARE EXPECTEDTO BE EXTREMELY STRONG, ONE-FOURTH THE DENSITY OF STEEL, ANDTO PERMIT CONSIDERABLE SAVINGS IN THE COST OF ERECTION, MAINTENANCE, AND REPLACEMENT OF BRIDGES, ETC. PHASE I WILL PRODUCE, TEST, AND ANALYZE I-BEAMS FABRICATED FROM SEVERAL MAGNAWEAVE CONSTRUCTIONS (WEAVE GEOMETRIES); TH ...

    SBIR Phase I 1983 Department of Transportation
  10. A NOVEL LOW-COST INFRARED ABSORBING MATERIAL

    SBC: Damaskos, Inc.            Topic: n/a

    N/A

    SBIR Phase I 1983 NavyDepartment of Defense

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government