Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Microfabricated Broadband Connectors for Frequencies Above 100 GHz

    SBC: Nuvotronics, LLC            Topic: N/A

    The region of the electromagnetic spectrum from 100 GHz to 400 GHz is currently underutilized but an area of exciting promise. Although atmospheric attenuation is higher in this region, the high frequency enables higher bandwidth operation. Transmit and receive components are also small resulting in the potential for lightweight miniature systems. Sub-millimeter waves also have the unique ability ...

    SBIR Phase I 2012 Department of CommerceNational Institute of Standards and Technology
  2. Non-contact Inline Material Sensor for Measurement of Electrical Properties of Nanofiber Films

    SBC: PANERATECH, INC.            Topic: N/A

    PaneraTech is proposing a non-contact dual sensor for broadband and real-time characterization of thin nanofiber films during the manufacturing. Our solution offers several unique aspects that are ideal for this application. For instance, it uses a dual CPW sensor for low frequencies and free space transmission system for higher frequency band. Our proposed sensor system is also equipped with high ...

    SBIR Phase I 2012 Department of CommerceNational Institute of Standards and Technology
  3. Silicon Carbide Avalanche Photodiodes for Single-photon Direct Detection of Lyman-alpha Radiation

    SBC: Aymont Technology, Inc.            Topic: N/A

    In the proposed Phase I SBIR program, Aymont Technology and CoolCAD Electronics will design and demonstrate prototype silicon carbide (SiC) avalanche photodiodes (APD) specifically designed for high-efficiency, single-photon counting of 121.6 nm Lyman-alpha photons. This detector will be provided to relevant personnel at NIST for calibration and testing. Both discrete APDs and arrays will be used ...

    SBIR Phase I 2009 Department of CommerceNational Institute of Standards and Technology
  4. Visible Hyperspectral Image Projector Based on Spatial Light Modulators

    SBC: Boulder Nonlinear Systems, Inc.            Topic: N/A

    There are many applications for hyperspectral image detectors, but for the detectors to be widely accepted standardized calibration protocols must be developed. This research aims to bridge this gap through the development of a commercially available hyperspectral image projector (HIP) system. The proposed effort is to build a prototype visible HIP system to generate calibrated, realistic imagery ...

    SBIR Phase II 2009 Department of CommerceNational Institute of Standards and Technology
  5. Expressive Integrity Constraint Validation with OWL

    SBC: Clark & Parsia, LLC            Topic: N/A

    We propose to develop a commercially adequate, robust and perfomant OWL-based Integrity Constraint (IC) validation system with several innovations, including novel debugging and explanation support for data integrity errors; incremental and optimized validation of data integrity; and a unified system for validating structured, semi-structured, and semantic data. A rigorous and formal specification ...

    SBIR Phase II 2009 Department of CommerceNational Institute of Standards and Technology
  6. Refreshable Locking Tactile Image Array for Accessibility

    SBC: E L I A Life Technology Inc            Topic: N/A

    This is an SBIR Phase II proposal to develop a tactile refreshable computer display prototype (TRCD) that will support multiple tactile alphabets (e.g. ELIA, braille, and Roman), multiple lines of text, and graphics to benefit the more than 1.8 million blind Americans. Commercially available TRCDs are expensive (~$12,000, or $19 per actuator), provide only one line of text (with 640 actuators) and ...

    SBIR Phase II 2009 Department of CommerceNational Institute of Standards and Technology
  7. Time Synchronization of Wireless Sensor Networks

    SBC: ESENSORS INC.            Topic: N/A

    A wireless sensor and actuator network capable of providing precision time synchronization between the nodes of the network will be developed. The IEEE 1451.0 smart transducer interface and IEEE 1588 time synchronization standards will be combined, with additional software and hardware to provide synchronization between the clocks on the Wireless Transducer Interface Modules (WTIM) sensors/actuato ...

    SBIR Phase I 2009 Department of CommerceNational Institute of Standards and Technology
  8. Kilopixel Array Cryostat (KPAC) System for Mulit-kilogram Transition Edge Sensor (TES) Arrays

    SBC: High Precision Devices, Inc.            Topic: N/A

    Transition Edge Sensor (TES) detector development at NIST has reached a level where arrays containing several thousand pixels (kilopixels) are practical and , indeed, necessary for fielding systems required for many industrial, research, and homeland security applications. Current easily deployable cryostat technology required to reach the ultra-cold operating temperatures of TES arrays (50 to 100 ...

    SBIR Phase II 2009 Department of CommerceNational Institute of Standards and Technology
  9. Development of Broadband VIPAs in Mid-to Long Infrared

    SBC: Precision Photonics Corporation            Topic: N/A

    VIPA etalons are simple compact devices that offer many times more dispersion than gratings and are finding increasing application where higher spectral resolution is needed. Current VIPA designs do not work in the spectroscopically important mid- and long-infrared wavelengths, and do not have large operating bandwidths compatible with femtosecond combs. Incorporating resolution improvements from ...

    SBIR Phase II 2009 Department of CommerceNational Institute of Standards and Technology
  10. Vacuum Windows for Third Generation Syschrotron Radiation Beamlines

    SBC: Advanced Design Consulting USA, Inc.            Topic: N/A

    Improving the quality and intensity of the x-ray beam is an important design goal for every synchrotron installation. Although small, the effects of vacuum windows on x-ray absorption and phase contrast cannot be neglected. Synchrotron x-rays have wavelengths on the order of one Angstrom (1 x 10-10m), the same order of magnitude as inter-atomic distances. These x-rays are used to study many differ ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government