List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. "AN INNOVATIVE DESIGN TOOL FOR RAPID BATTLE SCENARIO ASSESSMANT" (P-9156)

    SBC: UTD, INC.            Topic: N/A

    N/A

    SBIR Phase I 1993 Department of DefenseAir Force
  2. "VIRTUAL" AIR INTERCEPT CONTROL (AIC) ARCHITECTURES FOR TRAINING AIR INTERCEPT CONTROL PROCEDURES

    SBC: Research Development Corporation            Topic: N/A

    N/A

    SBIR Phase I 1993 Department of DefenseNavy
  3. 00-003B-Radar and MMW: Inkjet Print Self-Assembly of Multifunctional Devices on Flexible Nanosat Surfaces

    SBC: Nanosonic Inc.            Topic: N/A

    The objective of the proposed MDA Phase II program is to develop the capabilities to manufacture next-generation radio frequency (RF) and microwave device components relevant to the design of a phased array antenna system onto flexible and easily formablesubstrates using low-cost inkjet print self assembly methods. A rapid and continuous fabrication approach, inkjet self assembly printing will be ...

    SBIR Phase II 2003 Department of DefenseMissile Defense Agency
  4. 1 kW Man-portable Hybrid-Electric Power System using Catalytic Fuel Ignition Technology

    SBC: EDTEK, INC.            Topic: N/A

    The overall objective of this Phase II SBIR project is to develop and demonstrate a 1 kW man-portable multi-fueled thermophotovoltaic (TPV) power system. The TPV technology is based on a grey body (silicon carbide) emitter, resonant mesh infrared bandpassfilters, and GaSb photovoltaic cells. These key components have been developed on previous programs. The approach to achieving this goal is to ...

    SBIR Phase II 2003 Department of DefenseArmy
  5. 3-D Radiography and Image Analysis of Defect Detection

    SBC: Waterjet Technology Inc            Topic: N/A

    In Phase I of this project, we will investigate the feasibility of adding a "real-time" or "near real-time " stereoscopic imaging capability to the armaments radiographic inspection system already in place at Yuma Proving Ground. We will determine the best way to implement rapid, accurate, and cost-effective automated stereoscopic inspection with minimal modifications to existing equipment. We pro ...

    SBIR Phase I 1993 Department of DefenseArmy
  6. A Catalytic Conformational Prion Sensor

    SBC: Arete Associates            Topic: N/A

    DESCRIPTION (provided by applicant): The major objective of the proposed project is to develop methodology that will allow fast and efficient detection of infectious prion proteins prior to the onset of clinical symptoms. This includes the detection of infectious prions in mortal products, early ante-mortem diagnostic of the prion diseases, and developing experimental approaches allowing deline ...

    SBIR Phase II 2003 Department of Health and Human Services
  7. A COMPREHENSIVE SIMULATOR FOR MULTIPHASE FLUID FLOW AND CHEMICAL TRANSPORT IN POROUS MEDIA

    SBC: Hydrogeologic Inc.            Topic: N/A

    FIELD INVESTIGATIONS NATIONWIDE REVEAL THE PRESENCE OF NON-AQUEOUS PHASE LIQUIDS IN THE SUBSURFACE. OILY FUELS HAVE BEEN RELEASED TO THE SUBSURFACE BY LEAKY TANKS, WHILE AT OTHER SITES, CONTAMINATION HAS RESULTED FROM CHEMICAL SPILLS AND IMPROPER WASTE DISPOSAL PRACTICES. DUE TO THE COMPLEXITIES OF MULTIPHASE FLOW AND TRANSPORT PROCESSES, RESEARCHERS HAVE ONLY RECENTLY BEGUN TO DEVELOP SIMULATION ...

    SBIR Phase I 1993 National Science Foundation
  8. A Context-Based, Signature-Predictive Classifier for Automated, Robust Material-Encoded Textures

    SBC: JRM ENTERPRISES, INC.            Topic: N/A

    JRM proposes a novel context-dependent, signature-based approach to improve the automation and quality of material-classification of imagery and arbitrary n-channel remote-sensed data. In the Phase I, JRM will design three key components: (1) anautomated N-channel signature-predictive material classification algorithm, (2) a pixel-material spatial-correlation refinement algorithm and (3) an iter ...

    SBIR Phase I 2003 Department of DefenseNavy
  9. A CONTROLLED RESORPTION PERIODONTAL COLLAGEN MEMBRANE

    SBC: Regenetec Biomatrix, Inc.            Topic: N/A

    THE OBJECTIVE IS TO MODIFY COLLAGEN TO INCREASE AND CONTROL THE RESORPTION TIME IN IMPLANTS WITHOUT CAUSING INFLAMMATION. THE SPECIFIC AIM IS TO DEVELOP A COLLAGEN MEMBRANE FOR PERIODONTAL USE WITH A RESORPTION TIME OF ABOUT TWELVE WEEKS AND NEGLIGIBLE INFLAMMATORY RESPONSE. A NONINFLAMMATORY LONG RESORPTION TIME COLLAGEN WOULD ALSO FIND APPLICATION IN ORTHOPEDICS, BREAST IMPLANTATION, CONTROLLED ...

    SBIR Phase II 1993 Department of Health and Human Services
  10. A DAMAGE-ASSESSMENT AND TEMPERATURE-MEASUREMENT SYSTEM SUITABLE FOR THERMO-STRUCTURAL TESTING OF COMPOSITE MATERIALS

    SBC: Waterjet Technology Inc            Topic: N/A

    ADVANCED AEROSPACE PROGRAMS REQUIRE MATERIALS CAPABLE OF OPERATING IN TEMPERATURE ENVIRONMENTS EXCEEDING 2000OF. TO ASSESS THE THERMAL AND STRUCTURAL PERFORMANCE OF THESE MATERIALS, TESTING MUST BE PERFORMED AT HIGH TEMPERATURES. NEW TECHNIQUES ARE NEEDED TO MONITOR AND ASSESS MATERIAL PERFORMANCE UNDER THESE TEST CONDITIONS. PROPOSED IS THE DEVELOPMENT OF AN IMAGING SYSTEM FOR MONITORING THERMO-S ...

    SBIR Phase II 1993 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government