List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Non-toxic process for depositing highly-dense, corrosion-resistant aluminum on complex geometry components

    SBC: Alameda Applied Sciences Corporation            Topic: N07115

    Alameda Applied Sciences Corporation (AASC) proposes dry, non-toxic, plasma-based hybrid energetic ion deposition and implantation process to prepare highly-dense, corrosion-resistant aluminum on complex geometry aircraft components. By replacing electroplated Low Hydrogen Embrittlement cadmium (LHE-Cd), a highly toxic metal and known carcinogen with serious ES&H issues, AASC’s non-toxic process ...

    SBIR Phase I 2007 Department of DefenseNavy
  2. Production of New Durable, Transparent Conductive Coatings

    SBC: Alameda Applied Sciences Corporation            Topic: AF071103

    Transparent conductive indium tin oxide (ITO) coatings are used on the canopies of certain USAF aircraft for a variety of electromagnetic functions. However, the aircraft canopies suffer from short service lifetimes and must be replaced often because today’s ITO coatings exhibit poor mechanical durability and scratch resistance as aircraft fly through rain and dust. The need for frequent replace ...

    SBIR Phase I 2007 Department of DefenseAir Force
  3. A fast pulse, portable fast neutron source for special nuclear materials detection

    SBC: Alameda Applied Sciences Corporation            Topic: N/A

    Alameda Applied Sciences Corp proposes to develop a fast pulse, portable, fast neutron source to detect SNM in the field. Our source offers a 20ns neutron pulse with a repetition rate up to 1kHz. The goal is to develop a source with 1000hrs of continuous operation at 1E8 n/s. The Ph I program will demonstrate the critical features of the source including pulse width, reproducibility and neutron yi ...

    SBIR Phase I 2007 Department of Homeland Security
  4. FCAPD Protective Coating for Space Tethers

    SBC: Alameda Applied Sciences Corporation            Topic: S704

    Alameda Applied Sciences Corporation (AASC) proposes to demonstrate extended service lifetime of space tethers in the Low Earth Orbit (LEO) environment by using Filtered Cathodic Arc Plasma Deposition (FCAPD) to deposit a high quality protective coating onto space tether material. Protective coatings deposited by FCAPD have low defect density, excellent adhesion to space tether material, low mass ...

    SBIR Phase I 2007 National Aeronautics and Space Administration
  5. A fast pulse, intermediate flux, bench-top, high rep-rate x-ray source for PRS diagnostic calibration

    SBC: Alameda Applied Sciences Corporation            Topic: DTRA06013

    Presently, commercial and government radiation test facilities do not have convenient, reliable calibration systems for routine, day-in, day-out checks on x-ray and neutron detectors or their filter arrays. Lack of such calibration systems compromises the quality of the testing, and leads to wasted time and manpower resources used to resolve the ensuing uncertainties. We are developing a compact, ...

    SBIR Phase II 2007 Department of DefenseDefense Threat Reduction Agency
  6. Active Interrogation for Special Nuclear Materials (SNM) Detection Experimental Study

    SBC: Alameda Applied Sciences Corporation            Topic: DTRA07003

    AASC’s objective is to mitigate the risk of implementing an active interrogation system based upon time of flight measurements. A fast pulse neutron source is a critical component of a time of flight system even at large stand off. This program directly addresses means to control the probe radiation pulse in a fast neutron source. In some concept of operations, pulse width is a larger concern ...

    SBIR Phase I 2007 Department of DefenseDefense Threat Reduction Agency
  7. Protective conformal coatings for spacecraft polymers and paints

    SBC: Alameda Applied Sciences Corporation            Topic: AF07T011

    Alameda Applied Sciences Corp proposes to further develop its non-line of sight, energetic coating system to deposit protective thin film coatings for polymers in the low earth orbit. Numerous satellites costing $25M to $1B reside in LEO and the lifetime time of the polymers used in these assets is limited by atomic oxygen (AO) erosion, UV/VUV damage and the negative effects of static charging. ...

    STTR Phase I 2007 Department of DefenseAir Force
  8. Autonomous UAV Collision Avoidance

    SBC: AKELA INC            Topic: N07T025

    We are proposing to explore the capabilities of a wideband imaging radar that has been developed for other applications to perform the detection function of an autonomous see and avoid system, by using its operating parameters and associated signal processing algorithms in a detailed system simulation of UAV operations in the NAS. This will provide us a baseline of realistic performance for perfo ...

    STTR Phase I 2007 Department of DefenseNavy
  9. Ultra-light weight and low-cost in-situ system for damage detection of ballistic protective armor

    SBC: ACELLENT TECHNOLOGIES, INC            Topic: A07157

    Acellent Technologies proposes to build an innovative and cost-effective ultra portable system for detection of damage in personnel ballistic armor inserts. The system upon will provide in-situ capability to detect damage in armor inserts by personnel in the field. Current techniques commonly used in determining the health of the ballistic protective armor such as X-ray, may be time-consuming, exp ...

    SBIR Phase I 2007 Department of DefenseArmy
  10. Maturation of Structural Health Management Systems for Solid Rocket Motors

    SBC: ACELLENT TECHNOLOGIES, INC            Topic: N/A

    Solid rocket motor cases are subject to a variety of external environmental and loading conditions from cradle-to-grave. These conditions can significantly impact the performance and decrease safety of the rocket motor. Fueling of the rocket motor adds an additional complexity in that inspection of the interior becomes impossible while creating the possibility of disbonds between the case and fuel ...

    SBIR Phase I 2007 National Aeronautics and Space Administration

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government