You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Activated Reactants to Reduce Fuel Cell Overpotentials

    SBC: JSJ Technologies, LLC            Topic: A10AT011

    The current produced in electrochemical galvanic cells is primarily dependent on the rate of the electrode reactions where the cell's anode is less negative, supplying less energy than thermodynamically predicted, and the cell's cathode is less positive, supplying less energy than thermodynamically predicted. Reduction of electrochemical overpotentials in electrochemical systems has been the prim ...

    STTR Phase I 2010 Department of DefenseArmy
  2. Additive Manufactured Smart Structures with Discrete Embedded Sensors

    SBC: 3DFlexible Inc            Topic: A17AT024

    Recent advances in 3D structure printing and 3D direct printed electronics have widened the scope of possibilities for the Internet of Things (IoT). New near room temperature 3D direct ink writing (DIW) additive manufacturing (AM) printing processes allow many different type of sensors and they can be embedded anywhere in a structure, which offers several benefits. 1. Protection: sensors face degr ...

    STTR Phase II 2019 Department of DefenseArmy
  3. Additive Manufacturing of Multifunctional Nanocomposites

    SBC: Sciperio, Inc.            Topic: A13AT010

    Sciperio with team members Georgia Institute of Technology and Centecorp have teamed up to develop an Additive Manufacturing Composite using nano and micro fillers. The team will develop multi-scale models that are supported by experimental characterization for advanced 3D Printable materials. Inelastic response of high strength hierarchical structures composed of engineered materials and specif ...

    STTR Phase I 2013 Department of DefenseArmy
  4. Analysis and Design of Adaptive Multi-Function Antenna Systems Based on Signal Fragmentation

    SBC: Albanese Defense and Energy Development Company            Topic: A18BT009

    We propose an innovative mathematical approach to the analysis and design of multi-function adaptive antenna systems. It uses the idea of signal fragmentation that has passed significant prior testing and employs the methods and results from sampling theory, approximation theory, and numerical optimization. The fragmentation of a signal into a combination of short elementary pulses (wavelets) allo ...

    STTR Phase I 2019 Department of DefenseArmy
  5. An Ultra-High Carbon Steel Bonded Tungsten Carbide Material for Armor Piercing Rounds

    SBC: ADVANCED MATERIALS & DEVICES            Topic: OSD12T07

    This Small Business Technology Transfer (STTR) Phase I effort will demonstrate the feasibility of an innovative tungsten carbide (WC) metal matrix composite for use as a non-carcinogenic penetrator for armor piercing (AP) munitions for small arms. The objectives of this effort are to: 1) Mechanically compact the WC and binder powders, 2) Sinter the compacted powders into a fully dense composite, 3 ...

    STTR Phase I 2013 Department of DefenseArmy
  6. Bioelectrocatalyzed Nitrogen Fixation under Standard Conditions

    SBC: Fulcrum Bioscience, LLC            Topic: A13AT007

    The synthesis of ammonia through nitrogen fixation is a vital component to all plant life and the world economy as a fertilizer and commodity chemical. The global industial production of ammonia exceeded 140MM tons in 2009 and is expected to grow to 160MM tons by 2020. Most ammonia,>90% is synthesized through the Haber-Bosch processThe Haber-Bosch process produces more than 90% of the industrial ...

    STTR Phase I 2013 Department of DefenseArmy
  7. Bio-Inspired Visual Navigation: From Landmarks via Bearing to Controls

    SBC: Intelligent Automation, Inc.            Topic: A12aT030

    In a low-texture indoor environment, landmark-based navigation is difficult due to lack of distinctive micro-features such as SIFT and SURF. Intelligent Automation, Inc. (IAI) and GRASP Laboratory at the University of Pennsylvania propose a Bio-Inspired Visual Navigation System with the following three innovations: First, we propose a segmentation-based method to extract landmarks as closed contou ...

    STTR Phase I 2013 Department of DefenseArmy
  8. Compact and Efficient Membraneless Water Purification

    SBC: LYNNTECH INC.            Topic: A18BT005

    Local water production for troops using standard membrane filtration processes presents a significant logistics burden because of high energy consumption for removing particles based on size-exclusion methods and the constant need to replace fouled membranes. A membraneless filtration method using dissolved CO2 has been demonstrated to separate charged particles through the mechanism of diffusioph ...

    STTR Phase I 2019 Department of DefenseArmy
  9. Design of Easy-To-Use Structural Alloy Feedstocks for Additive Manufacturing

    SBC: ELEMENTUM 3D, INC.            Topic: A18BT003

    There is a need for easy-to-use, versatile alloys for additive manufacturing that print consistently regardless of the specific process or machine, or the metallurgical and manufacturing knowledge of the user. Such capability is especially critical for soldiers to be able to make every day items on demand in the theater of war. Toward meeting this need, recent successes developing high performance ...

    STTR Phase I 2019 Department of DefenseArmy
  10. Development of a Fire-Resistant, Thermal Barrier Coating with Low-Temperature Flexibility

    SBC: Advanced Materials and Processes            Topic: A08T028

    The purpose of this STTR Phase II project is to continue research and development on novel fire resistant thermal barrier coatings (TBC) with low temperature flexibility. Polyurethane coatings are the most important segment of aircraft coatings. Excellent

    STTR Phase II 2010 Department of DefenseArmy
US Flag An Official Website of the United States Government