You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY22 is not expected to be complete until September, 2023.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Smart Baseplate for Additive Manufacturing

    SBC: Luna Innovations Incorporated            Topic: DLA18A001

    Additive manufacturing (AM) has rapidly evolved into a valuable technique for making parts which, at times, cannot be fabricated through conventional machining methods, or for fabrication of small quantities of complex parts. One challenge in the area of AM is the lack of real-time feedback on the fabrication process and the quality of the part being made. This is especially critical given the rel ...

    STTR Phase II 2019 Department of DefenseDefense Logistics Agency
  2. Automated In-situ Large-area De-processing of ICs with High Throughput

    SBC: MICRONET SOLUTIONS INC.            Topic: DMEA18B001

    The objective of this proposal is to demonstrate the feasibility of producing an automated delayering and imaging system with end point detection, material density detection with built in neural network error correction. This process, coined fast Automated Delayering-Image Capture System (ADICS) leverages off of the existing Pix2Net which is a proven automated imaging 3D microchip reconstruction ...

    STTR Phase I 2019 Department of DefenseDefense Microelectronics Activity
  3. Thin Film Deposition of Highly Conductive Metals for Sensor Applications- Phase II

    SBC: Summit Information Solutions, Inc.            Topic: A17AT001

    Deposition of highly conductive, continuous thin film metals has proven to be a significant challenge. There are several techniques that allow deposition of these metals, but their application is limited to planar surfaces and only offer complete line of sight deposition. During a recent Phase I STTR project, Summit Information Solutions, Inc. (Summit), in partnership with University of Alabama in ...

    STTR Phase II 2019 Department of DefenseArmy
  4. Developing Software for Pharmacodynamics and Bioassay Studies

    SBC: TConneX Inc.            Topic: DHP16C001

    Thegoal is to develop asoftwaretool that implementsa novelapproach applicableto fitgeneral pharmacologic, toxicology, or other biomedical data, that mayexhibita non-monotonic dose-responserelationship for which thecurrent parametricmodels fail. Thesoftwareexplores dose-responserelationships using both monotonicand non-monotonicmodels,and estimates theassociated doseresponsecurves,which can further ...

    STTR Phase II 2019 Department of DefenseDefense Health Agency
  5. Rapid Prototyped 3D Printed Filters for CW Agent Protection

    SBC: TDA Research, Inc.            Topic: A18BT018

    Defense against chemical weapons is a critical DoD requirement. An effective defense requires the development of unique respirator systems that prevent inhalation of chemical warfare (CW) agents. In addition, the protective equipment exposed to CW agents must not pose a residual hazard after use in the battlefield. Existing respirator canisters remove CW agents, but they do not self-decontaminate ...

    STTR Phase I 2019 Department of DefenseArmy
  6. Printable Radar Absorbent Materials/Structures for Soldier Uniforms & Other Army Textiles

    SBC: Luna Innovations Incorporated            Topic: A18BT023

    Portable Advanced Battlefield and Ground surveillance radar can now provide effective detection of small targets, posing challenges for troop movement and stealth missions. Radar absorbent strategies have been achieved in composites and larger textile objects, but effective light-weight solutions for current operational clothing and individual equipment systems such as uniforms, knapsacks and body ...

    STTR Phase I 2019 Department of DefenseArmy
  7. Novel Nanocoating technology for Functional Textile

    SBC: Claros Technologies Inc.            Topic: A18BT024

    Nanoparticles represent an attractive alternative in coating processes due to their functional versatility, including surface, optical, conductive and catalytic properties. However, current processes of coating textile products with nanoparticles results in rapid loss of the nanoparticles during laundering or use, leading to a significant decrease in product durability and functionality and increa ...

    STTR Phase I 2019 Department of DefenseArmy
  8. Tools for Parallel Adaptive Simulation of Multiphase Ballistic Flows

    SBC: SIMMETRIX INC.            Topic: A15AT002

    This project will provide state-of-the-art predictive capabilities for simulating systems central to advancing the U.S. Army’s modernization priorities related to long-range precision fires and future vertical lift platforms. The goals of the project are to: (1) Produce geometry and meshing technologies that support the modeling and discretization techniques needed to explicitly track evolving/i ...

    STTR Phase II 2019 Department of DefenseArmy
  9. Design of Easy-To-Use Structural Alloy Feedstocks for Additive Manufacturing

    SBC: Elementum 3D, Inc.            Topic: A18BT003

    There is a need for easy-to-use, versatile alloys for additive manufacturing that print consistently regardless of the specific process or machine, or the metallurgical and manufacturing knowledge of the user. Such capability is especially critical for soldiers to be able to make every day items on demand in the theater of war. Toward meeting this need, recent successes developing high performance ...

    STTR Phase I 2019 Department of DefenseArmy
  10. Membraneless Water Purification via Continuous, Self-Contained, Vacuum-Assisted Diffusiophoresis

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: A18BT005

    We propose the development of a membraneless water purification system using continuous, self-contained, vacuum-assisted diffusiophoresis. Using diffusiophoresis allows the system to clean water contaminated with particulates and bacteria without membranes or filters, while producing a stream of fresh, drinkable water. The system will operate using only electricity supplied by portable batteries/s ...

    STTR Phase I 2019 Department of DefenseArmy
US Flag An Official Website of the United States Government