You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. A Concrete Additive Manufacturing Process for Fixed and Floating Wind Turbine Foundations and Towers

    SBC: JC Solutions            Topic: 14b

    Tall towers and foundations for modern offshore and land-based wind turbines are too large to transport over roads or rail due to their extremely large dimensions. Existing “one-off” on-site construction methods are too expensive, and are too slow for manufacturing foundations and towers in the large numbers needed, especially for offshore components manufactured in ports with limited lay-down ...

    STTR Phase I 2018 Department of Energy
  2. A microfluidic ice nucleating particle counter for continuous measurements from small aerial platforms

    SBC: HANDIX SCIENTIFIC Inc.            Topic: 23a

    Quantifying atmospheric aerosol, clouds and precipitation processes are critical needs for understanding and interpreting Earth’s changing energy budget, is a DOE objective, and is of broader benefit to the public. Specifically, the formation of ice in the atmosphere depends on the nature and abundance of ice nucleating particles, and has major implications for precipitation and cloud interactio ...

    STTR Phase I 2018 Department of Energy
  3. Amplifiers for High Repetition Rate Diode-Pumped Ultra-Intense Femtosecond Lasers

    SBC: XUV Lasers, Inc.            Topic: 25c

    The problem being addressed is the development of high intensity ultrashort pulse lasers, in recognition that today’s ultra-high intensity lasers are limited to repetition rates of < 10 Hz. Technical solutions are sought to enable the generation of high energy (joule-level) laser pulses that can be focused to highly relativistic intensity at high repetition rates (100-1000 Hz). The proposed proj ...

    STTR Phase I 2019 Department of Energy
  4. Cavity Enhanced Thomson Scattering System for Low Temperature Plasmas

    SBC: Seaforth LLC            Topic: 30a

    Electrons play a very key role in plasma chemistry and dynamics of low temperature plasmas. Improved capability for measuring electron number density, ne, and electron energy distribution function, EEDF, in weakly ionized low temperature plasmas would benefit both fundamental study and application areas. For example, the capability would directly benefit emerging research targeted at modifying and ...

    STTR Phase I 2013 Department of Energy
  5. Compositionally Gradient Garnet/PVDF-HFP Hybrid Membranes for Li-Metal Batteries

    SBC: HAZEN RESEARCH, INC.            Topic: 19a

    Development of Li-ion conducting membranes capable of supporting Li-metal anode to enable high- performance Li-metal batteries (LiMB) is a priority for the Department of Energy (DOE). State-of- the-art membranes used for Li-ion batteries (LiB) are not suitable for LiMB and have a number of disadvantages including poor cycling performance, low Li-ion conductivity, and electrochemical stability with ...

    STTR Phase I 2019 Department of Energy
  6. Defect Free, Ultra-Rapid Thinning/Polishing of Diamond Crystal Radiator Targets (20??m) for Highly Linearly Polarized Photon Beams

    SBC: Sinmat Inc            Topic: 46e

    The fabrication of high-quality ultra thin (~20 micron) diamond crystals targets for 9 GeV highly polarized photon beams is an outstanding challenge. Current state of the art polishing/thinning techniques are not successful in thinning single crystal diamond to such dimension because of its extreme hardness and chemical inertness. These techniques create significant stresses surface and sub-surfac ...

    STTR Phase I 2010 Department of Energy
  7. High Surface Area-to-Volume Ultrathin Dense Membrane for Hydrogen Separation

    SBC: T3 SCIENTIFIC LLC            Topic: 10c

    Providing a reliable, clean and economical energy source is a priority of the US government. The challenge is to use coal, a secured and economical energy source, to produce clean hydrogen fuel to support domestic and global green economy with near-zero emission. Conventional separation technology and even developmental technology do not satisfy all of the requirements for hydrogen production from ...

    STTR Phase I 2010 Department of Energy
  8. Infinitely Recyclable Bioplastics (Topic 8, subtopic b)

    SBC: SusMer, Inc            Topic: 08b

    Plastics are indispensable materials for the modern life and global economy, but current practices in the generation and disposal of commodity plastics are largely unsustainable and causing severe worldwide plastics pollution and enormous materials' energy and value losses to the economy. In particular, plastics are a material of choice in packaging applications but they are currently designed for ...

    STTR Phase I 2019 Department of Energy
  9. Inhibiting Prolyl Hydroxylase to Mimic Natural Acclimatization to High Altitude to Improve Warfighter Performance at High Altitude

    SBC: Research Logistics Company            Topic: SOCOM17C001

    Acclimatization is the long-term adjustment that humans experience when exposed for weeks or months to high altitude. Acclimatization is important in this context because a warfighter who is acclimatized to high altitude is immune to high altitude illness, has superior work capacity, and has cognitive function approaching that found at sea level. In other words, the acclimatized warfighter is opti ...

    STTR Phase I 2018 Department of DefenseSpecial Operations Command
  10. Interference coatings for high energy and average power femtosecond-class lasers in the 0.8-2?m wavelength range

    SBC: XUV Lasers, Inc.            Topic: 28e

    The problem/situation that is being addressed concerns the development of near infrared ultrafast interference coatings(IC) for high average power femtosecond lasers that will meet the specifications of the DoE solicitation: “broad-bandwidth, laser damage threshold of 0.5 J/cm2 (1 ps), engineered using a process that is scalable to large areas.” Advances in compact high gradient laser-driven p ...

    STTR Phase I 2019 Department of Energy
US Flag An Official Website of the United States Government