You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Storable Clean Ethane/ethylene Nitrous Engine (SCENE)

    SBC: PIONEER ASTRONAUTICS            Topic: MDA18T005

    he Storable Clean Ethane-ethylene Nitrous Engine (SCENE) is a proposed technology designed to provide upper stages and spacecraft with non-toxic, liquid, non-cryogenic, high-performance propulsion with an Isp on the order of 300 seconds. The propellant components are stored as liquids under their saturated vapor pressures. With the SCENE, nitrous oxide is used as an autogenously pressurized oxidiz ...

    STTR Phase I 2019 Department of DefenseMissile Defense Agency
  2. Simultaneous Multiple Object Detection System

    SBC: SEMQUEST, INC.            Topic: MDA16T006

    An advanced hit detection technology is needed for MDA that can report impacts at hyper-velocities and at multiple hit locations.We present a technology with a high level of performance that leverages decades of hit technology experience and utilizes existing technologies developed under previous efforts.Our technology offers a low latency non-interpolated direct indicator of multiple hit location ...

    STTR Phase II 2018 Department of DefenseMissile Defense Agency
  3. Multi-Physics Analysis Tool for High-Energy Gas Lasers

    SBC: Material Flow Solutions, Inc.            Topic: MDA16T001

    Based on the results of our Phase I work, one significant barrier to optimizing battery performance lies in understanding the relationship between bulk solids and particle flow properties and the flow into the die. Our hypothesis: an increase in quality batteries production can be achieved if powder preparation process can be optimized and the die filling process controlled. We feel that control o ...

    STTR Phase II 2019 Department of DefenseMissile Defense Agency
  4. M&S Uncertainty Quantification

    SBC: OPTIMIZATION TECHNOLOGIES, INC.            Topic: MDA12T007

    OptTek Systems, Inc (OptTek), proposes an affordable, effective UQ capability for both legacy and new BMDS M & S. The OptTek Team includes research institution partner Oak Ridge National Laboratory (ORNL) and subcontractor RTSync Corporation (RTSync). The proposed BMDS M & S UQ capability maximizes insertability into existing and future MDA BMDS M & S-supported Event processes, analysis methods, a ...

    STTR Phase I 2013 Department of DefenseMissile Defense Agency
  5. M&S Uncertainty Quantification

    SBC: Numerica Corporation            Topic: MDA12T007

    A goal of Uncertainty Quantification (UQ) is to use computer simulation of complex systems to make scientifically informed assessments for high-consequence decisions. Because end-to-end empirical data is difficult to obtain for the Ballistic Missile Defense System (BMDS), computer simulation provides the best method for understanding BMDS capabilities against a wide range of threats. Numerica Co ...

    STTR Phase I 2013 Department of DefenseMissile Defense Agency
  6. Innovative Polishing Technology for Fabrication of High Performance Epi-ready GaSb Substrates

    SBC: Sinmat Inc            Topic: MDA12T003

    Antimony containing III-V semiconducting compounds are particularly attractive for the fabrication of a wide variety of electronic and optoelectronic devices such as photo detectors operating in the long wave infrared wavelength (12-32µm) range. The production of epi quality GaSb wafers still remains one of the important problems for rapid commercialization of GaSb devices. Sinmat Inc. proposes a ...

    STTR Phase I 2013 Department of DefenseMissile Defense Agency
  7. Dynamic virtual moulage based on thin film adhesive displays

    SBC: ARCHIE MD INC.            Topic: DHA17A002

    Providing Army combat medics with meaningful experience in treatment of battlefield injuries is a particular challenge. Moulage has the potential to assist in acquiring what could otherwise be very hard-to-come-by preparatory experience for distressing real-life emergencies medics and soldiers may encounter in the field. However, current approaches to moulage are limited in their ability to reflec ...

    STTR Phase II 2018 Department of DefenseDefense Health Program
  8. Contamination-free, Ultra-rapid Reactive Chemical Mechanical Polishing (RCMP) of GaN substrates

    SBC: Sinmat Inc            Topic: MDA09T001

    Gallium Nitride (GaN) substrates are ideal materials for fabrication of high-power and high-frequency devices based on III-V materials. The current state-of-the-art Chemical Mechanical Polishing (CMP) methods are plagued by several challenges, including, surface charge affects due to surface contamination, and sub-surface damages, which can limit the quality of III-V devices. Furthermore, there is ...

    STTR Phase I 2010 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government