You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Energy & Power Dense Supercapacitor: On-Chip Integration in MEMs Fabrication

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: DMEA21A001

    Due to recent advances in the field of microelectronics, there is an increasing demand for micro-sized energy storage devices that are capable of being incorporated into and provide energy for MEMS devices. In order to continue to enable this technological growth, and the benefits that stem from it, the storage density of electrical energy must also continually be improved, especially with respect ...

    STTR Phase I 2021 Department of DefenseDefense Microelectronics Activity
  2. CORE-Military: A Virtual Reality Platform for Emergency Care Training and Assessment in Austere Environments

    SBC: Radiant Images Inc.            Topic: DHA20B001

    In emergency medicine, time is a critical factor that can significantly influence the survival of seriously ill patients. Early recognition of clinical deterioration and rapid initial management is paramount in any setting where emergency care is provided. In military medicine and humanitarian care, delivering high quality and timely care to injured patients poses even greater and more complex cha ...

    STTR Phase I 2021 Department of DefenseDefense Health Agency
  3. In-Ear Exposure Sensor with Integrated Noise Attenuation and Communications Capabilities

    SBC: Diversified Technical Systems, Inc.            Topic: DHA20B002

    According to the Department of Defense, there were more than 400,000 known TBI diagnoses in service members between 2000 and 2019 (DVBIC, 2020). Detection and measurement of potential injury due to blast overpressure and blunt impact have been priorities of the US military for many years, especially since Operation Enduring Freedom (OEF). Among those deployed, estimated rates of probable TBI range ...

    STTR Phase I 2021 Department of DefenseDefense Health Agency
  4. Eye-readable Solution-based Dye Displacement Probe for Large-area Detection of Opioids

    SBC: Intelligent Optical Systems, Inc.            Topic: CBD20AT001

    Intelligent Optical Systems, Inc., in collaboration with Bowling Green State University, proposes to develop a field-rugged, eye-readable indicating spray solution that can immediately detect synthetic opioids over a large area of contamination (i.e., military vehicles, individual protective equipment, clandestine labs, etc.). The proposed chemosensor in a spray solution format will detect multipl ...

    STTR Phase I 2021 Department of DefenseOffice for Chemical and Biological Defense
  5. Multi-Functional Nanotube-Based Sensor Array for Detecting Blood Coagulation Defects

    SBC: Innosense Llc            Topic: DHA19A001

    Defense Health Agency (DHA) is seeking a multi-functional diagnostic to determine blood coagulopathy in real time at point-of-care (POC). Blood coagulopathy, resulting in uncontrolled bleeding, is implicated in 80% of operating room deaths and 50% of trau

    STTR Phase I 2019 Department of DefenseDefense Health Agency
  6. Marburg Virus Prophylactic Medical Countermeasure

    SBC: MAPP BIOPHARMACEUTICAL, INC.            Topic: CBD18A002

    There are currently no vaccines or therapeutics available for Marburg Virus Disease (MVD). Given the specter of weaponization and the terriblemorbidity and high mortality rate of MVD, this represents a critical threat to the operational readiness of the Warfighter. While traditionalvaccines have proven to be a huge contribution to public health, they do have some limitations especially in the cont ...

    STTR Phase I 2018 Department of DefenseOffice for Chemical and Biological Defense
  7. Marburg Virus Prophylactic Medical Countermeasure

    SBC: Flow Pharma, Inc.            Topic: CBD18A002

    Flow Pharma, Inc. is a biotechnology company in the San Francisco Bay Area developing fully synthetic cytotoxic T lymphocyte (CTL)stimulating peptide vaccines for Marburg virus. The FlowVax vaccine platform allows us to create dry powder formulations of biodegradablemicrospheres and TLR adjuvants incorporating class I and class II T cell epitopes. FlowVax vaccines can be designed for delivery by i ...

    STTR Phase I 2018 Department of DefenseOffice for Chemical and Biological Defense
  8. Virus-Like Particle Based pan-Marburgvirus Vaccine

    SBC: Luna Innovations Incorporated            Topic: CBD18A002

    Marburg virus (MARV) is a filamentous enveloped non-segmented negative sense RNA virus. This viruse is considered to be extremelydangerous with case fatality rates as high as 88-90%. Extensive efforts have gone towards effective vaccines for MARV prevention, however,none have been successfully established as licensed vaccines. Glycoprotein (GP) is the only surface protein of MARV. There are substa ...

    STTR Phase I 2018 Department of DefenseOffice for Chemical and Biological Defense
  9. Smart Baseplate for Additive Manufacturing

    SBC: Luna Innovations Incorporated            Topic: DLA18A001

    Additive manufacturing (AM) has rapidly evolved into a valuable technique for making parts which, at times, cannot be fabricated through conventional machining methods.One challenge in the area of AM is the lack of real-time feedback on the fabrication process and the quality of the part being made.This is especially critical given the relatively long periods of time that complex parts can require ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  10. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: SENVOL LLC            Topic: DLA18A001

    The Department of Defense (DoD) has a demand for out-of-production parts to maintain mission readiness of various weapons platforms. Additive manufacturing (AM) is an exciting and promising manufacturing technique that can make out-of-production parts and holds the potential to solve supply chain issues, such as high costs (i.e. for low-volume parts) and sole sourcing risks. The ability of AM to s ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
US Flag An Official Website of the United States Government