You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Developing Software for Pharmacodynamics and Bioassay Studies
SBC: TConneX Inc. Topic: DHP16C001Thegoal is to develop asoftwaretool that implementsa novelapproach applicableto fitgeneral pharmacologic, toxicology, or other biomedical data, that mayexhibita non-monotonic dose-responserelationship for which thecurrent parametricmodels fail. Thesoftwareexplores dose-responserelationships using both monotonicand non-monotonicmodels,and estimates theassociated doseresponsecurves,which can further ...
STTR Phase II 2019 Department of DefenseDefense Health Agency -
Large Component, High-quality Composite Fabrication Using Nanocarbon Heating Films
SBC: LUNA INNOVATIONS INCORPORATED Topic: N18BT031Autoclaves are typically used to fabricate high-quality composite components with acceptable thermal properties and low void volume. They provide elevated temperature processing cycles and external pressure required for adequate compaction to achieve these desired properties. However, autoclaves represent large capital and energy investment while limiting the size of fabricated parts and productio ...
STTR Phase I 2019 Department of DefenseNavy -
Carbon Nanotube-Based Heater Coatings for Processing of Thermosetting and Thermoplastic Composites
SBC: MAINSTREAM ENGINEERING CORP Topic: N18BT031For this research program, Mainstream will collaborate with Colorado State University (CSU) to develop a nanostructured heater capable of curing aerospace grade composites out-of-autoclave (OOA). The use of autoclaves is the primary cost driver in composite manufacturing due to size limitations, long processing times, and inefficient energy usage. Therefore, the Navy is looking to develop a nanost ...
STTR Phase I 2019 Department of DefenseNavy -
Collective Meta-Reasoning Runtime Assurance of Machine Intelligence for Unmanned Autonomous Vehicles
SBC: BARRON ASSOCIATES, INC. Topic: N18BT032Barron Associates has teamed with a prominent researcher in the field of formal verification of cyber physical systems to propose a new paradigm in runtime assurance for complex autonomous systems controlled and operated by artificial machine intelligence. A two-stage approach is considered in which formal verification processes are first performed offline at algorithm design time. Online, during ...
STTR Phase I 2019 Department of DefenseNavy -
Innovations in Designing Damage Tolerant Rotorcraft Components by Interface Tailoring
SBC: HARP ENGINEERING LLC Topic: N19AT003The performance of a composite material is heavily influenced by the strength and toughness of the interlaminar region, which is the resin rich area between the plies of a fiber reinforced composite. The interlaminar region generally provides a direct path for crack propagation since no continuous reinforcement is present and is often the cause of failure in materials subjected to cyclic loading s ...
STTR Phase I 2019 Department of DefenseNavy -
Process to Mitigate Catastrophic Optical Damage to Quantum Cascade Lasers
SBC: IRGLARE LLC Topic: N19AT004The development of a catastrophic optical damage model for quantum cascade lasers describing instantaneous laser damage at high optical power levels is proposed. The model will be validated by comparison to experimental data. Based on obtained results, changes to laser design and laser fabrication resulting in an increased damage threshold will be implemented. The work will ultimately result into ...
STTR Phase I 2019 Department of DefenseNavy -
Atomic Triaxial Magnetometer
SBC: VESCENT PHOTONICS LLC Topic: N19AT006Vescent Photonics and MIT Lincoln Labs (MIT-LL) propose to develop a quantum-based vector magnetometer with low size, weight, power, and cost (SWaP+C) for Navy applications. The proposed system will rely on probing magnetically-sensitive, atomic-like transitions of nitrogen-vacancy (NV) centers in diamond to provide stable, high-bandwidth readout of the vector magnetic field with sub-picotesla sen ...
STTR Phase I 2019 Department of DefenseNavy -
Power-Dense Electrical Rotating Machines for Propulsion and Power Generation
SBC: CONTINUOUS SOLUTIONS LLC Topic: N19AT007The primary objective is to develop electric machine/drive topologies and power architectures that achieve the power densities required for 50% more power without the increase in weight or space requirements. In addition to PMSM-based designs, two new machine topologies will be considered. The first is a trapped flux coreless (TFC) machine that utilizes superconducting pucks made of YBCO to produc ...
STTR Phase I 2019 Department of DefenseNavy -
Homopolar AC Electric Machines for Naval Applications
SBC: McCoy Consulting, LLC Topic: N19AT007The objective of this proposed effort is to increase the power and torque density of rotating electric machinery for Naval applications by up to 50%. This aggressive goal will be achieved by developing the novel homopolar AC machine (HAM) topology. This relatively un-studied topology relies on solenoidal field and armature coils, making manufacturing simpler than traditional machines. The HAM elim ...
STTR Phase I 2019 Department of DefenseNavy -
GECCO: Gecko-gripper for EOD with Cavitation Cleaning Operation
SBC: VALOR ROBOTICS, LLC Topic: N19AT011The objective of the Phase I proposal is to investigate the application of controlled cavitation cleaning technology in conjunction with gecko-inspired mechanical adhesion and soft elastomeric applicators for use in non-intrusive EOD operations. This investigation requires the proof-of-concept testing and validation of a controlled cavitation cleaning mechanism, and a soft robotic gecko-inspired m ...
STTR Phase I 2019 Department of DefenseNavy