You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Vision-Based Navigation for Formation Flight onboard ISS

    SBC: JAYCON SYSTEMS LLC            Topic: T11

    The proposed Phase II supports completion of the RINGS science missions on ISS using SVGS as real-time sensor for the EMFF maneuver. During Phase I, SVGS-based navigation of RINGS was developed and tested on a 3DOF ground-based platform, and mechanical and electrical integration of RINGS with the free-flying robotic platforms on ISS (Astrobee) was designed in detail. SVGS was deployed and tested o ...

    STTR Phase II 2019 National Aeronautics and Space Administration
  2. Ultraefficient Themoelectric Devices

    SBC: MICROXACT INC.            Topic: T801

    Thermoelectric (TE) devices already found a wide range of commercial, military and aerospace applications. However, at present commercially available TE devices typically offer limited heat to electricity conversion efficiencies, well below the fundamental thermodynamic limit, calling for the development of higher efficiency materials. The team of MicroXact Inc., Virginia Tech and Sundew Technolog ...

    STTR Phase II 2010 National Aeronautics and Space Administration
  3. uG-LilyPond- Floating Plant Pond for Microgravity

    SBC: SPACE LAB TECHNOLOGIES, LLC            Topic: T7

    Regenerative space life support will undoubtedly require food production, to recover nutrients and close the carbon loop in a spacecraft habitat. Aquatic plants have enormous potential for edible biomass production but have been little studied as potential food crops for space applications. The proposed μG-LilyPond™ is an autonomous environmentally controlled floating plant cultivation system ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  4. Thermal Stir Welding of High Strength and High Temperature Alloys for Aerospace Applications

    SBC: Keystone Synergistic Enterprises, LLC            Topic: T901

    The Keystone and MSU team propose to build on the successful feasibility demonstration conducted during Phase I to complete the development of solid-state joining of high strength and temperature alloys utilizing the Thermal Stir Welding process. The focus alloy for this project is Haynes 230; the alloy of choice typically utilized in rocket engine nozzel skirts. This class of alloy is difficult t ...

    STTR Phase II 2010 National Aeronautics and Space Administration
  5. Simultaneous Multiple Object Detection System

    SBC: Semquest, Inc.            Topic: MDA16T006

    An advanced hit detection technology is needed for MDA that can report impacts at hyper-velocities and at multiple hit locations. We present a technology with a high level of performance that leverages decades of hit technology experience and utilizes existing technologies developed under previous efforts. Our technology offers a low latency non-interpolated direct indicator of multiple hit locati ...

    STTR Phase II 2018 Department of DefenseMissile Defense Agency
  6. Physics-Based Modeling Tools for Life Prediction and Durability Assessment of Advanced Materials

    SBC: ELDER RESEARCH, INC.            Topic: T12

    The technical objectives of this program are: (1) to develop a set of physics-based modeling tools to predict the initiation of hot corrosion and to address pit and fatigue crack formation in Ni-based alloys subjected to corrosive environments, (2) to implement this set of physics-based modeling tools into the DARWIN probabilistic life-prediction code, and (3) to demonstrate corrosion fatigue crac ...

    STTR Phase II 2019 National Aeronautics and Space Administration
  7. New Flexible FR Polyurethane Foams for Energy Absorption Applications

    SBC: Gordon Nelson and Associates            Topic: T703

    Project involves development of new flexible FR polyurethane (PU)insulation foams through a non-toxic environmentally friendly composite approach. Foams have bound-in polymeric phosphonate FRs, with added synergists and smoke suppressants. Such foams will not leach FR. Foams have fine cell structure and excellent flexible foam properties. Cone performance of the identified foam family (368 peak ...

    STTR Phase II 2013 National Aeronautics and Space Administration
  8. Multi-Robot Planetary Exploration Architectures

    SBC: AURORA FLIGHT SCIENCES CORPORATION            Topic: T101

    Space policy direction is shifting, particularly with respect to human goals. Given the uncertainty of future missions to the moon, Mars, and other bodies, a tool that allows for informed analysis of the option space is particularly relevant. Aurora Flight Sciences and MIT propose to further develop the Multi-Robot Planetary Exploration Architecture (MRPEA) methodology, a suite of software tools ...

    STTR Phase II 2010 National Aeronautics and Space Administration
  9. Multi-Physics Analysis Tool for High-Energy Gas Lasers

    SBC: Material Flow Solutions, Inc.            Topic: MDA16T001

    Based on the results of our Phase I work, one significant barrier to optimizing battery performance lies in understanding the relationship between bulk solids and particle flow properties and the flow into the die. Our hypothesis: an increase in quality batteries production can be achieved if powder preparation process can be optimized and the die filling process controlled. We feel that control o ...

    STTR Phase II 2019 Department of DefenseMissile Defense Agency
  10. Metal Digital Direct Manufacturing (MDDM) for Close-Out of Combustion Chambers and Nozzle Fabrications

    SBC: Keystone Synergistic Enterprises, LLC            Topic: T12

    This NASA sponsored STTR project will investigate methods for close-out of large, liquid rocket engine, nickel or stainless steel nozzle, coolant channels utilizing robotic laser and pulsed-arc additive manufacturing (AM)methods. Structural jacket to coolant channel land area interface strength will be quantified and metallurgical characterization completed.Process optimizations will be conducted ...

    STTR Phase II 2019 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government