You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Cognitive Adaptation and Mission Optimization (CAMO) for Autonomous Teams of UAS Platforms

    SBC: Opto-knowledge Systems, Inc.            Topic: N17BT035

    The Navy needs cognitive control capabilities that enable an autonomous robotic team comprised of a ground control station node and a team of UAS platforms to operate independently (or with minimal human oversight) while carrying out complex missions. A cognitive control capability needs to be developed that concurrently optimizes the balance of mission risk / performance with respect to the Navy ...

    STTR Phase II 2019 Department of DefenseNavy
  2. A Wearable Blast Wave Sensing System for In-Air and Underwater Explosions

    SBC: ADVANCED MATERIALS AND DEVICES            Topic: DHA17C002

    The goal of this STTR Phase II project is to produce a wearable device with the capability to sense and record blast waves from in-air and underwater explosions. The flexible piezoelectric film-based sensor that was identified as an accurate sensing eleme

    STTR Phase II 2019 Department of DefenseDefense Health Agency
  3. Protocol Feature Identification and Removal

    SBC: P&J ROBINSON CORP            Topic: N18AT018

    Protocols used for communication suffer bloat from a variety of sources, such as support for legacy features or rarely used (and unnecessary) functionality. Traditionally, the Navy subscribes to a blanket adoption of a standard protocol "as is". Unnecessary features are active and can be accessed by both internal and external systems creating security vulnerabilities. PJR Corporation's (PJR's) Pha ...

    STTR Phase II 2019 Department of DefenseNavy
  4. Optimized High Performance Stainless Steel Powder for Selective Laser Melting Additive Manufacturing (AM)

    SBC: Shepra, Inc.            Topic: N16AT007

    Stainless steel is a vital component of many air, land and sea systems that support the Navy warfighter. In particular, 17-4 precipitation hardened stainless steel, (17-4 PH SS) with its extrodinary combination of strength, ductility, high temperature performance and corrosion resistance plays an important role in supporting the warfighter. When processed conventionally, 17-4 PH SS typical exhibit ...

    STTR Phase II 2018 Department of DefenseNavy
  5. High Throughput Testing of Additive Manufacturing

    SBC: MRL MATERIALS RESOURCES LLC            Topic: N18AT028

    Additive manufacturing is a disruptive new manufacturing paradigm that hold tremendous potential for creation of novel designs and introduction of novel new alloy systems. However, much of this potential remains unrealized due to a lack of robust material properties databases. Accurate calibration of materials models and robust part qualification and certification regimes both will require massive ...

    STTR Phase II 2019 Department of DefenseNavy
  6. Oxygen Production and Delivery on Demand

    SBC: Global Research and Development Inc.            Topic: DHA17B005

    This Phase II proposal is in response to the Defense Health Agency 2017 SBIR topic 17B-005. The approach is an electrochemical membrane oxygen pump using newly developed nano-thickness membrane technology. The total membrane with all the layers is less

    STTR Phase II 2019 Department of DefenseDefense Health Agency
  7. Information-based Norms on Flow, Operations and Traffic Over Networks (INFOTON)

    SBC: ISEA TEK, LLC            Topic: N18AT027

    The Internet of Things (IoT) connects people, data, and "things" (e.g., software, sensors, platforms), facilitating the translation of information into actions. Although naval platforms’ networks and communication suites have evolved significantly in the past few years to support such required connectivity, one of the greatest technical challenges still facing the military community is the proce ...

    STTR Phase II 2019 Department of DefenseNavy
  8. Quantifying Uncertainty in the Mechanical Performance of Additively Manufactured Parts Due to Material and Process Variation

    SBC: TECHNICAL DATA ANALYSIS, INC.            Topic: N16AT004

    Additive manufacturing (AM) technology offers rapid prototyping and large design freedom. It can potentially reduce costs and improve quality by providing precise control on microstructure and density for the production of complex components. However, the part quality and mechanical performance of components fabricated by current AM technology are not comparable to that produced by traditional met ...

    STTR Phase II 2018 Department of DefenseNavy
  9. Quantifying Uncertainty in the Mechanical Performance of Additively Manufactured Parts Due to Material and Process Variation

    SBC: MRL MATERIALS RESOURCES LLC            Topic: N16AT004

    Additive manufacturing is an extremely customizable process; however, variations in the chosen build parameters can lead to drastic differences in part performance. The performance variation due to process parameters is still not well understood, and propagating all uncertainties from the various sources has been a challenge. Sources of AM parts’ performance variability include uncertainties in ...

    STTR Phase II 2018 Department of DefenseNavy
  10. Innovative Multi-scale/Multi-physics based Tool for Predicting Fatigue Crack Initiation and Propagation in Aircraft Structural Components using Phase

    SBC: TECHNICAL DATA ANALYSIS, INC.            Topic: N16AT003

    We propose to further develop the phase-field modeling and simulations we carried out in Phase I. Key focus of our research effort are enhancement phase-field models and computational strategies in order to make them applicable to more general, complex static and fatigue loading situations to predict crack initiation and growth in unified computational framework. Entire process of crack nucleation ...

    STTR Phase II 2018 Department of DefenseNavy
US Flag An Official Website of the United States Government