Award Data

SOF combat swimmers have a need for the continuous monitoring of each others relative position while diving and for the capability of being able to communicate with each other to help establish a common operational picture (COP).The C3SA system was previously developed under SBIR Topic SOCOM08-001 thru the receipt of both Phase I and Phase II SBIR awards.The C3SA established a stand-alone network ...

The objective in this project is to implement and validate a probabilistic qualification framework that will enable additive manufacturing (AM) materials and part qualification through the use of a data-driven predictive model within a statistical framework. Senvol seeks to develop and validate a data-driven ICME probabilistic framework for assisting qualification of AM materials and parts. Phase ...

Superconductor digital circuits, operating at very high clock speed, can directly process wideband digitized radio frequency (RF) signals. By integrating such digital processing circuitry together with superconductor analog-to-digital converters (ADCs), we propose to develop the next generation digital-RF receivers. Leveraging the recent development of multiple superconductor ADCs on the same chip ...

xß-Ga2O3 has emerged as a potentially disruptive semiconductor with a predicted breakdown field of ~8 MV/cm which is more than twice the breakdown field for the incumbent wide bandgap semiconductors GaN and SiC. The availability of ß-Ga2O3 bulk substrates sets this material apart from other wide bandgap materials for power electronic applications. However, the challenge is to find suitable epita ...

Additive manufacturing is a disruptive new manufacturing paradigm that hold tremendous potential for creation of novel designs and introduction of novel new alloy systems. However, much of this potential remains unrealized due to a lack of robust material properties databases. Accurate calibration of materials models and robust part qualification and certification regimes both will require massive ...

The proposed program will develop dielectrics for dc superconducting power transmission cables that are cooled with cryogenic helium gas. The Dielectrics will be sealed again helium gas penetration and allow for an operating voltage of 12 kV in a pressure of 2 MPa at 50 K. The dielectrics will be designed for use with all helium facing components of power transmission systems based on CORC cables. ...

Optically pumped magnetometers provide very high performance but they cost tens of thousands of dollars, and they are large and power hungry. Recently we successfully developed and commercialized laser pumped magnetometers with size, weight and power consumption that is an order of magnitude below current state-of-the-art without sacrificing performance. In this project, the focus will be on produ ...

HYPRES, in collaboration with University of Massachusetts, proposes an energy-efficient hybrid-temperature-heterogeneous-technology (HTHT) digital data link for interfacing 4K superconductor electronics with room-temperature electronics. Comprising several stages of cryogenic SiGe amplifiers at different temperatures, followed by equalization techniques, this data link will be designed to minimize ...

Micro-RDC has developed portable radiation effects test structures that scale to new process nodes.These structures will enable the investigation of the effects of radiation on the new technology from the material processing level as well as the circuit level.Fabricating the chosen structures and the refinement of software to extract the model parameters will be completed in this effort.A suite of ...

Optonicus proposes development of the Wide-Area Laser Additive Manufacturing in Metals with Adaptive Beam Shaping (WALAM-ABS) laser additive manufacturing (LAM) system. The WALAM-ABS metal additive manufacturing system will solve long-standing drawbacks imposed by current single-point selective laser melting LAM technology through the use of wide-area processing based on proprietary multi-beam fib ...