You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Low-cost, Time-resolved Chemical Characterization of Atmospheric Aerosols

    SBC: Aerosol Devices Inc.            Topic: 23b

    The composition of atmospheric particulate matter (“aerosols”) strongly influences health and environmental impacts, but there exist few time-resolved, long-term records of particle-phase chemical composition due to lack of appropriate monitoring tools. Needed is an instrument that is robust, easy-to-operate, with automated calibrations and data reduction, to provide operationally-inexpensive ...

    STTR Phase II 2019 Department of Energy
  2. ECCCHO: Effective Combat Casualty Care Handoff Operations

    SBC: Tier 1 Performance Solutions, LLC            Topic: DHA17B002

    Approximately 70% of sentinel events in medical care are related to communication mishaps. Despite regular and frequent occurrence, an even higher percentage (80%) of severe medical errors are related to miscommunication during handoffs (i.e., transferrin

    STTR Phase II 2019 Department of DefenseDefense Health Agency
  3. Fast fingerprinting & detection of materials using portable / hand-held devices and high performance computing for use in manufacturing and supply chain applications.

    SBC: OPTIMAL SOLUTIONS, INC            Topic: 20d

    Material analysis is critical to enable the production of safe and quality goods and today companies use cumbersome, time-consuming, and error-prone methods to analyze materials using expensive analytical laboratories. Companies have a pressing need to measure material properties (like chemical composition and physical properties) throughout their supply chains. This project addresses DOE’s inte ...

    STTR Phase II 2018 Department of Energy
  4. IP Access Gateway

    SBC: Telluric Labs LLC            Topic: 24a

    This proposal aims to develop a back-end (BE) board, the “IP Access Gateway” (IPAG), in a commercial PCIe form factor, and build a COTS-based Continuous-Flow Trigger and Data Acquisition system (CF-TDAQ). The system monitors and synchronizes timestamps collected with local timing, and performs the event building of the data chunks from multiple detector sub-systems, front-end (FE) electronics ...

    STTR Phase II 2018 Department of Energy
  5. CORC; Cable Based High Field Hybrid Magnets for Future Colliders

    SBC: Advanced Conductor Technologies LLC            Topic: 26b

    "The next generation of very high field accelerator magnets (20 T or more) are expected to be made with high-temperature superconductors (HTS) along with conventional low-temperature superconductors (LTS) to reduce cost. The operation and protection of these magnets becomes very challenging particularly if the HTS coils are made with the tapes and operate at a much lower current than the LTS coils ...

    STTR Phase II 2018 Department of Energy
  6. Scaleup of a Combined Spray Pyrolysis and Fluidized-bed Reactor Method for the Production of High Performing Layered Nickel- rich Cathode Materials as a Continuous Process

    SBC: HAZEN RESEARCH, INC.            Topic: 14a

    To increase the utilization of electric vehicles, the US Department of Energy is seeking to reduce the cost of electric vehicle batteries to less than $125/kWh by 2022. To achieve this goal, the costs of cathode materials, which account for approximately 30% of the cost of vehicle batteries, must be reduced significantly. To address the challenge of lowering the costs of advanced lithium battery c ...

    STTR Phase II 2018 Department of Energy
  7. REBCO Coated Conductor Cables for Fusion Magnets

    SBC: Advanced Conductor Technologies LLC            Topic: 22c

    The feasibility for fusion as a practical energy source needs to be enhanced significantly by removing some of the restrictions that low-temperature superconductors put on the fusion magnet systems. This can be done by using high-temperature superconductors, allowing for much larger temperature margins, a higher magnet performance and less mechanical degradation during operation. There are curren ...

    STTR Phase II 2013 Department of Energy
  8. Recovery Act- Development of a Fiber Based Source of High Average Power Ultrafast Pulses at 2.0 Microns

    SBC: Kapteyn-Murnane Laboratories, Inc.            Topic: 04d

    Bright coherent light sources in the soft x-ray region of the spectrum are useful for a variety of applications of interest to DOE in the basic sciences, nanoscience and biology, and for technological applications. At Free-Electron Laser Facilities, peak power output of the x-ray pulses is enhanced by using a mid-infrared laser pulse instead of a near-infrared pulse. The current front end for mid- ...

    STTR Phase II 2010 Department of Energy
US Flag An Official Website of the United States Government