You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY22 is not expected to be complete until September, 2023.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Radiation Fault Analysis for 45 Nanometer CMOS-SOI VLSI Circuits

    SBC: Lynguent, Inc.            Topic: DTRA092001

    State of the art Radiation Hardened by Design (RHBD) techniques must scale down in feature size for radiation effects in 45 nm processes, and also scale up in complexity to support radiation fault analysis of VLSI circuits. Recent access to commercial 45 nm CMOS Silicon-on-Insulator (SOI) technologies has increased the interest in this technology for rad-hard electronic applications due to the in ...

    SBIR Phase I 2010 Department of DefenseDefense Threat Reduction Agency
  2. Cut and Puncture Resistant Low Mass Diver Dry Suit with High Mobility

    SBC: WARWICK MILLS, INC.            Topic: SOCOM10001

    We propose to provide essential protection from lacerations, punctures and abrasion for SOCOM’s free swimming diver force using a multi-layer laminate. The key technology will employs a novel stretch-pleat design with a proven puncture and cut resistant fabric that will allow a lower diving mass ensemble with a focus on mobility. The core puncture and cut layer is based on a lightweight punctur ...

    SBIR Phase I 2010 Department of DefenseSpecial Operations Command
  3. Lightweight, Small Volume, CO2 Removal Technology for Underwater Breathing Apparatus (UBA) and Undersea Platforms: An Advanced Nanotechnology Resolut

    SBC: Marshall Laboratories, Inc.            Topic: SOCOM10002

    We will employ the very latest methods in nanotechnology to realize vastly improved CO2 scrubbing efficiency in closed cycle underwater breathing apparatuse(UBA). Our system will occupy minimal volume, will be simple in design and will employ benign nano-particles as the CO2 active scrubbing material. Due to the design, CO2 uptake will be maximized and breathing flow resistance will kept at a mi ...

    SBIR Phase I 2010 Department of DefenseSpecial Operations Command
  4. Micro Weather Sensor (MWS)

    SBC: Advanced Distributed Sensor Systems, Inc            Topic: SOCOM10006

    A need exists for a new environmental situational awareness sensor with multi-spectrum camouflage that is extremely small (90g) and capable of measuring with aviation-grade accuracy: wind speed/direction, horizontal visibility, sky condition, cloud heights, temperature, dewpoint, barometric pressure, precipitation and CBRN contamination. There exists a strong desire to support a variety of commun ...

    SBIR Phase I 2010 Department of DefenseSpecial Operations Command
  5. A Portable Laser Device for Remote Filler Identification

    SBC: AAC International            Topic: DTRA122012

    The proposed SBIR research (Phase I and II) is devoted to developing a laser-based acousto-ultrasonic system for inspection of sealed containers. The system represents a promising technology for improving safety management in anti-terrorism and treaty compliance operations. The system will use a pulsed laser to excite the container and a laser Doppler vibrometer for long stand-off vibratory (ult ...

    SBIR Phase I 2013 Department of DefenseDefense Threat Reduction Agency
  6. Conformable Thermal Ground Plane

    SBC: i2C Solutions, LLC            Topic: DTRA122002

    Miniaturized smart munitions are seeing increasing use across all branches of the Department of Defense (DoD) in order to meet the ever evolving mission needs for the U.S. warfighter. These smart micromuntions have been enabled by advances in capabilities and miniaturization of critical microelectonic and microelectromechanical systems such as sensor, navigational, communications, and triggering ...

    SBIR Phase I 2013 Department of DefenseDefense Threat Reduction Agency
  7. Prototype Application of Mobile, Cloud-based, Watson-Like Technologies for TBI/PTSD Clinical Decision Support and Predictive Analytics

    SBC: Lifecom Inc.            Topic: DHP12005

    The goal of this Phase I project is to develop an engineering plan and to create a prototype for a mobile, cloud-based expert system to aid in diagnosis, decision support and predictive analytics to improve clinical outcomes for veterans, soldiers, and their families with traumatic brain injury (TBI) and posttraumatic stress disorder (PTSD). Lifecom, Inc. is a health information technology compan ...

    SBIR Phase I 2013 Department of DefenseDefense Health Agency
  8. Ear Protection Validation System

    SBC: Benson Medical Instruments Company            Topic: DHP12009

    This proposal contains the description for a hearing protection device (HPD) fit-test instrument, the CCA-200fit. The CCA-200fit has the capability to determine if an individual is receiving effective noise protection from an HPD. The CCA-200fit also has training capabilities via a display, audio, and a touchscreen which will allow it to provide instruction, feedback, and results to the individual ...

    SBIR Phase I 2013 Department of DefenseDefense Health Agency
  9. Covert Optically-Reporting Threat-Functionalized Nanomaterials

    SBC: VOXTEL, INC.            Topic: DTRA122003

    The Defense Threat Reduction Agency (DTRA) and the U.S. Strategic Command Center for Combating Weapons of Mass Destruction (SCC-WMD) requires transformational materials technology to support the intelligence, surveillance, and reconnaissance (ISR) of personnel and materials associated with weapons of mass destruction (WMD) development, manufacturing, and proliferation. Voxtel, Inc. proposes to fa ...

    SBIR Phase I 2013 Department of DefenseDefense Threat Reduction Agency
  10. Next-Generation Ear Seals for Circumaural Headsets and Hearing Protectors

    SBC: Hearing Components, Inc.            Topic: DHA172007

    The objective of this proposal is to demonstrate the feasibility of producing molded polyurethane viscoelastic foam ear seals with an integral skin, that we call Contoured Foam Pads (CFPs). These CFPs will have a surface profile that has targeted conformability around obstacles that results in an improved acoustic seal around eyeglasses from the military Approved Protective Eyewear List (APEL) and ...

    SBIR Phase I 2018 Department of DefenseDefense Health Agency
US Flag An Official Website of the United States Government