Award Data

The S-351 mini-sub is a prototype of the Dry Combat Submersible (DCS). This prototype was established as a means of risk reduction prior to a full commitment to the DCS program. Both of these platforms have an operational need to transit with minimum operator fatigue safely to a pre-defined point and covertly deploy and retrieve SEALS. To meet these operational needs, these platforms require upgra ...

Systems that operate in constrained environments depend on the acoustics in several ways. Harbor defense systems detect intruders (peopleand/or vessels) by either listening for their noises (passively) or by pinging on them and detecting their echoes (actively). Furthermore, suchsystems may also form the equivalent of an underwater cell phone network using sound to carry the information. The acous ...

Nanoscale imaging techniques are critical for progress in many disciplines, as we learn to master science and technology at the smallest dimensions — on the nanometer to atomic-scale. However, progress is becoming increasingly limited by the constraint...

SA Photonics, in conjunction with our teammates at the University of Arizona, have developed LARS, the low-cost augmented reality system. This system is a see-through HMD used for training and simulation. LARS was designed using an innovative freeform prism combiner which is small, lightweight and has very little obscuration of the outside world. We have partnered with Rockwell Collins Optronics ( ...

Overhead Persistent Infrared (OPIR) platforms observe challenging threat and scene phenomenology. Toyon Research Corporation developed an image processing framework for clutter estimation/suppression and track-before-detect to jointly detect and track targets. The Target Extraction and Conjoint Tracking application, developed under initial Phase II funding and demonstrated using real-world data so ...

Vacuum Process Engineering, Inc. (VPE), in collaboration with the University of California, Davis (UC Davis), proposes to develop and quantitatively verify a large scale production process for scandate tungsten nanocomposite powder to be used in high current density and long life cathodes during the Phase II effort. The plan for implementation of the large scale production process at VPE with powd ...

This Phase II STTR proposal will develop a computational tool for state-of-the-art computational modeling of multi-scale thermo-mechanics of heterogeneous energetic materials. The proposal will bring together researchers with long-standing expertise in flow software and physical modeling of high-speed reactive multi-material flows to work on further developing a cutting-edge computing tool called ...

Transphorm proposes to demonstrate a normally off fast high voltage Gallium Nitride power switch solution. The switch would block to 1200V, have a threshold voltage greater than 5 V, and the phase 2 switch will target an on resistance less than 15 ohm-mm and current more than 1 Amp. To accomplish these targets, Transphorm will combine the design requirements of realizing a high (and positive) thre ...

FreEnt Technologies, Inc. (FreEnt) and Johns Hopkins Universitys Applied Physics Laboratory (APL) are proposing a multiple-hit detection sensor called the Optical Lethality Measurement System (OLMS). This system is based on the Planar Optical Penetration Sensor (POPS) technology (originally developed and patented by APL) and prior art associated with the Blast Initiation Detector (BID). The BID is ...

This Phase II effort will further develop a technique to improve current seeker discrimination and tracking capabilities using a unique particle filter algorithm (PFA) approach. The advancement represents a significant upgrade to current and future seekers facing advanced threats in stressing environments. Quantifiable improvements over many facets of the current approach have been realized during ...