You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Wireless Torque Sensor for Condition Based Maintenance

    SBC: Albido Corporation            Topic: N11AT030

    In recent years, the need for highly reliable, durable and non-intrusive systems for monitoring the health condition of naval structures becomes more and more recognized. Of particular importance is the condition based maintenance of Navy rotating machinery (motors, generators, pumps, gear systems, etc.). Such Structural Health Monitoring (SHM) systems should be able to detect failures in their ea ...

    STTR Phase II 2013 Department of DefenseNavy
  2. Wireless Passive Nanoparticle based Intelligent Sensor System for Extreme Environments

    SBC: Sensatek Propulsion Technology, Inc.            Topic: T13

    Sensatek Propulsion Technology, Inc. proposes to demonstrate the feasibility of a wireless, passive, nanoparticle-based sensor system. The sensor in its current form can be used to measure real time temperatures and pressures wirelessly without the need of an external energy source. It should be noted that the same sensing principle can be used for strain monitoring as well. It comprises of a micr ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  3. Wireless Networked Cryogenic and Minimum Pressure Sensors

    SBC: Nanosonic Inc.            Topic: T13

    This NASA Phase I STTR program would develop high performance, wireless networked cryogenic and minimum pressure sensors for remote monitoring in propulsion systems, using SOI (Silicon on Insulator) NM (nanomembrane) techniques in combination with our pioneering ceramic nanocomposite materials. We will improve the current mechanical and electrical model of semiconductor nanomembrane based sensor ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  4. Wide Range Flow and Heat Flux Sensors for In-Flight Flow Characterization

    SBC: Tao Of Systems Integration Inc            Topic: T2

    The tracking of critical flow features (CFFs) such as stagnation point, flow separation, shock, and transition in flight provides insight into actual aircraft performance/safety. Sensing of these CFFs across flight regimes involves numerous challenges such as a wide temperature/pressure range from subsonic to hypersonic flows. Tao Systems, Mesoscribe Technologies and Virginia Tech propose to devel ...

    STTR Phase I 2010 National Aeronautics and Space Administration
  5. Wide Bandgap Nanostructured Space Photovoltaics

    SBC: Firefly Technologies            Topic: T3

    Firefly, in collaboration with Rochester Institute of Technology, proposes an STTR program for the development of a wide-bandgap GaP-based space solar cell capable of efficient operation at temperatures above 300oC. Efficiency enhancement will be achieved by the introduction of InGaP quantum wells within the active region of the wide-gap base material. The introduction of these nanoscale features ...

    STTR Phase I 2010 National Aeronautics and Space Administration
  6. Wide Area Video Motion Blur Elimination

    SBC: ObjectVideo            Topic: ST081007

    This Small Business Technology Transfer Phase-II project will design, develop and integrate an effective and efficient motion blur elimination algorithm to Autonomous Real-time Ground Ubiquitous Surveillance - Imaging System (ARGUS-IS) system by optimizing and implementing the algorithm proposed during the Phase-I investigation to FPGA. In addition, an image enhancement toolkit for ground station ...

    STTR Phase II 2010 Department of DefenseDefense Advanced Research Projects Agency
  7. Wash Durable Flame Resistant NonWovens

    SBC: Luna Innovations Incorporated            Topic: A16AT015

    Luna Innovations, teamed with North Carolina State University’s (NCSU) Non-Wovens Institute (NWI), will meet the Army’s need to develop a novel wash durable, flame resistant, non-woven textile. This practical system will provide military uniforms with excellent flame resistant (FR) protection at a lower manufacturing cost without compromising performance such as durability, repellency, and vec ...

    STTR Phase II 2018 Department of DefenseArmy
  8. Volumetric Wavefront Sensing for the Characterization of Distributed-Volume Aberrations

    SBC: Guidestar Optical Systems, Inc.            Topic: AF18AT006

    Modern Directed Energy (DE) missions require target engagements at low elevation angles and long ranges.These engagement geometries require propagation through distributed-volume turbulence. To correct for distributed-volume turbulence effects, an estimation of the turbulence along the propagation path is required. Correcting for these image aberrations will improve the quality of the target image ...

    STTR Phase I 2018 Department of DefenseAir Force
  9. Volume Digital Holographic Wavefront Sensor

    SBC: NUTRONICS, INC.            Topic: AF18AT006

    Nutronics, Inc. and Montana State University propose to develop and evaluate computational methods for a Volume Digital Holographic Wavefront Sensor (VDHWFS).VDHWFS based imaging offers the potential to provide the equivalent of wide field of view adaptive optics (AO) compensated imaging, but without the added complexity of AO components and hardware.Recent result for coherent imaging developed by ...

    STTR Phase I 2018 Department of DefenseAir Force
  10. VLSI Compatible Silicon-on-Insulator Plasmonic Components

    SBC: ITN ENERGY SYSTEMS, INC.            Topic: AF08BT18

    This Small Business Technology Transfer Phase I project will develop ultradense, low-power plasmonic integration components and devices for on-chip manipulation and processing of optical signals. Both passive and active components will be studied. Detailed performance predictions will be obtained through finite element modeling (FEM) of the harmonic Maxwell’s equations. The FEM provides detai ...

    STTR Phase I 2010 Department of DefenseAir Force
US Flag An Official Website of the United States Government