You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY22 is not expected to be complete until September, 2023.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: ARCTOS Technology Solutions, LLC            Topic: DLA18A001

    Universal Technology Corporation (UTC) has teamed with the University of Dayton Research Institute (UDRI), Stratonics, and Macy Consulting to demonstrate not only the transitionability into commercial systems, but also to develop the data analytics and monitoring and control requirements to extract the full value fromseveral sensors, including the Stratonics ThermaViz, acoustic and profilometry se ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  2. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: SENVOL LLC            Topic: DLA18A001

    The Department of Defense (DoD) has a demand for out-of-production parts to maintain mission readiness of various weapons platforms. Additive manufacturing (AM) is an exciting and promising manufacturing technique that can make out-of-production parts and holds the potential to solve supply chain issues, such as high costs (i.e. for low-volume parts) and sole sourcing risks. The ability of AM to s ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  3. Automated In-situ Large-area De-processing of ICs with High Throughput

    SBC: MICRONET SOLUTIONS INC.            Topic: DMEA18B001

    The objective of this proposal is to demonstrate the feasibility of producing an automated delayering and imaging system with end point detection, material density detection with built in neural network error correction. This process, coined fast Automated Delayering-Image Capture System (ADICS) leverages off of the existing Pix2Net which is a proven automated imaging 3D microchip reconstruction ...

    STTR Phase I 2019 Department of DefenseDefense Microelectronics Activity
  4. Computerized Robotic Delayering and Polishing System

    SBC: SPECTRAL ENERGIES LLC            Topic: DMEA18B001

    The proposed research and technical objectives in this project deal with computerized automatic delayering and polishing system that would be applicable to both commercial and government semiconductor device research and development with applications including Failure Analysis (FA), Fault Isolation (FI), and Reverse Engineering (RE) of semiconductor microelectronic devices. This project could hel ...

    STTR Phase I 2019 Department of DefenseDefense Microelectronics Activity
  5. Energy & Power Dense Supercapacitor: On-Chip Integration in MEMs Fabrication

    SBC: MAINSTREAM ENGINEERING CORP            Topic: DMEA21A001

    Due to recent advances in the field of microelectronics, there is an increasing demand for micro-sized energy storage devices that are capable of being incorporated into and provide energy for MEMS devices. In order to continue to enable this technological growth, and the benefits that stem from it, the storage density of electrical energy must also continually be improved, especially with respect ...

    STTR Phase I 2021 Department of DefenseDefense Microelectronics Activity
  6. Graphenated Carbon Nanotube Based MEMS Supercapacitors

    SBC: Faraday Technology, Inc.            Topic: DMEA21A001

    The inherent advantages of MEMS technology, including small size and cost-effective fabrication, make it ideal for numerous application in a wide range of industries ranging from defense, automotive, medical, to consumer industries. For applications that require self-powered MEMS electronics, an integrated energy storage device is required. Due to their small size, excellent cycle life and high po ...

    STTR Phase I 2021 Department of DefenseDefense Microelectronics Activity
  7. Integrated Micro-Supercapacitors via Laser Induced Graphene from Photoresist

    SBC: CORNERSTONE RESEARCH GROUP INC            Topic: DMEA21A001

    While supercapacitors have been demonstrated for decades, the biggest challenge is to develop a reliable fabrication strategy which can integrate these devices with current CMOS (complementary metal oxide semiconductor) technology. Current fabrication technologies do not have good compatibility with other electronic components or cannot manufacture the supercapacitor in a small form factor. Conseq ...

    STTR Phase I 2021 Department of DefenseDefense Microelectronics Activity
  8. Smart Baseplate for Additive Manufacturing

    SBC: Luna Innovations Incorporated            Topic: DLA18A001

    Additive manufacturing (AM) has rapidly evolved into a valuable technique for making parts which, at times, cannot be fabricated through conventional machining methods.One challenge in the area of AM is the lack of real-time feedback on the fabrication process and the quality of the part being made.This is especially critical given the relatively long periods of time that complex parts can require ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  9. Virus-Like Particle Based pan-Marburgvirus Vaccine

    SBC: Luna Innovations Incorporated            Topic: CBD18A002

    Marburg virus (MARV) is a filamentous enveloped non-segmented negative sense RNA virus. This viruse is considered to be extremelydangerous with case fatality rates as high as 88-90%. Extensive efforts have gone towards effective vaccines for MARV prevention, however,none have been successfully established as licensed vaccines. Glycoprotein (GP) is the only surface protein of MARV. There are substa ...

    STTR Phase I 2018 Department of DefenseOffice for Chemical and Biological Defense
US Flag An Official Website of the United States Government