You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Combat Systems of the Future

    SBC: Advanced Systems/Supportability Engineering Technologies And Tools, Inc.            Topic: N05149

    The S-351 mini-sub is a prototype of the Dry Combat Submersible (DCS). This prototype was established as a means of risk reduction prior to a full commitment to the DCS program. Both of these platforms have an operational need to transit with minimum operator fatigue safely to a pre-defined point and covertly deploy and retrieve SEALS. To meet these operational needs, these platforms require upgra ...

    STTR Phase II 2017 Department of DefenseSpecial Operations Command
  2. Thin Film Deposition of Highly Conductive Metals for Sensor Applications

    SBC: Summit Information Solutions, Inc.            Topic: A17AT001

    Summit Information Solutions, Inc. (Summit) proposes to use a mature thin film deposition technology, widely adopted by the microelectronics industry, to deposit pinhole-free thin films of copper and silver metal (< 10nm) onto oxide substrates. While there has been some success with using this thin film deposition technique to deposit these films onto metal substrates, a viable, repeatable methodo ...

    STTR Phase I 2017 Department of DefenseArmy
  3. Low-Temperature Fabrication of Flexible, High-Efficiency Perovskite Photovoltaic Modules for Energy Harvesting Applications

    SBC: Nanosonic Inc.            Topic: A17AT002

    Through the proposed STTR program, NanoSonic and Virginia Tech will fabricate flexible perovskite solar modules (12 x 12) that are capable of providing conversion efficiencies greater than 20% under AM 1.5G standard solar spectrum, and which demonstrate stability against temperatures up to 50C and relative humidity up to 80%. The photovoltaic market is dominated by crystalline silicon solar panel ...

    STTR Phase I 2017 Department of DefenseArmy
  4. Countering High Radiance CW Beams with Photonic Nanostructures

    SBC: FIBERTEK, INC.            Topic: A17AT003

    The proposed effort will investigate several nanophotonic structures to engineer the phase and amplitude of an incident optical beam to form a protective surface layer. Dielectric metasurfaces are used to engineer the optical properties of a protective layer on a sub-wavelength scale. Evaluations will be performed on the interactions of the metasurfaces with high energy lasers to form a basis ...

    STTR Phase I 2017 Department of DefenseArmy
  5. High Performance Armor via Additive Advanced Ceramics

    SBC: HOTEND WORKS, INC.            Topic: A17AT012

    The objective of this proposal is to investigate the use of a cutting edge Additive Manufacturing technology that uses a unique deposition architecture developed by HotEnd Works, Inc (HeW). The process allows for use and flexibility of many advanced material components such as alumina ceramics, boron carbide and silcon carbide. This proposal will explore how In previous work it was determined ...

    STTR Phase I 2017 Department of DefenseArmy
  6. Scalable Manufacturing of Functional Yarns for Textile-based Energy Storage

    SBC: Directed Vapor Technologies International, Inc.            Topic: A17AT013

    Smart textile technologies with advanced functionalities (e.g., sensing, physical actuation) are being developed for military and civilian applications. These products have, to date, been powered by conventional energy storage systems that can significantly limit the multi-functional aspects of product design. Next generation products are envisioned that rely on integrated energy storage technolog ...

    STTR Phase I 2017 Department of DefenseArmy
  7. Biofidelic Rat Testing Device (RTD) to Measure Blast Exposure and Loadings for TBI

    SBC: CFD Research Corporation            Topic: A17AT022

    The overall objective of this project (Phase I, II, and III) is to develop, fabricate, and test a novel biofidelic rat surrogate for the validation of primary blast loading conditions for mild traumatic brain injury (mTBI). The CFDRC/NJIT team will use extensive knowledge of blast loading characteristics and TBI studies coupled with past/ongoing efforts designing and testing a rat surrogate. In P ...

    STTR Phase I 2017 Department of DefenseArmy
  8. Passive Pneumatic Prosthetic Ankle with Biomimetic Response

    SBC: ADA Technologies, Inc.            Topic: DHP16C007

    The Defense Health Program seeks to improve the lives of service members suffering below knee amputations through the development of a non-powered lower extremity prosthesis designed to restore range of motion and power generation to that of an uninjured anatomical ankle. Current passive systems are still in early stages of development and typically only address one aspect of what the Defense Heal ...

    STTR Phase I 2017 Department of DefenseDefense Health Agency
  9. Advanced Morphing Moulage for Medical Training (AMM-MT)

    SBC: Vcom3D, Inc.            Topic: DHA17A002

    For this Phase I SBIR proposal, Vcom3D proposes to design advanced medical moulage that accurately simulates the progression of an injury or pathology by morphing through a series of clinical states to enable learners to confirm the progression of the wound and to determine whether iatrogenic errors or pathologies occurred duing treatment. The physical morphing moulage may be applied to medical m ...

    STTR Phase I 2017 Department of DefenseDefense Health Agency
  10. Smart Morphing Moulage Medical (SM3) Training Platform

    SBC: Luna Innovations Incorporated            Topic: DHA17A002

    Medical moulage is used in medical training to simulate injuries or pathologies, however current moulage is static and does not provide the trainee feedback on the quality of care or ultimate outcome of that care. Allowing a trainee to witness the injury or pathology -morph- while treatment is being provided can provide feedback on any potential mistreatment and enhance the learning and proficienc ...

    STTR Phase I 2017 Department of DefenseDefense Health Agency
US Flag An Official Website of the United States Government