You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY22 is not expected to be complete until September, 2023.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Empirical Optimization of Additive Manufacturing

    SBC: Universal Technology Corporaration            Topic: T1204

    In this Phase II STTR project, the proposed collaborative effort between UTC, AFIT, and ULRF represents a crucial step forward for AM. UTC’s unique AM optimization and process control framework, constructed entirely from experimental sensor data collected in-situ, will finally transfer technology from our SLM test bed system to state-of-the-art and commercial-grade systems, including a Concept ...

    STTR Phase II 2017 National Aeronautics and Space Administration
  2. NONA Repair of Composite Structures

    SBC: CORNERSTONE RESEARCH GROUP INC            Topic: T1202

    Supporting aerospace mission readiness, a system is needed that allows for composite repairs without the current roadblocks imposed by ovens, autoclaves, and expensive tooling. Cornerstone Research Group (CRG), its subsidiary NONA Composites, and the University of Dayton Research Institute (UDRI) presents NASA with the opportunity to obtain a rapid and robust method for on-site composite structura ...

    STTR Phase II 2017 National Aeronautics and Space Administration
  3. Ultra-Compact Transmitter for Space-Based Lidar

    SBC: FIBERTEK INC            Topic: T901

    Fibertek, Inc. in partnership with researchers at the Pennsylvania State University Center for Innovative Materials Processing through Direct Digital Deposition (CIMP-3D) are proposing to develop a state of the art, space-qualifiable laser transmitter that meets the requirements of the flash lidar transmitter defined in the 2016 STTR subtopic T9.01, Navigation and Hazard Avoidance Sensor Technolog ...

    STTR Phase II 2017 National Aeronautics and Space Administration
  4. Integrated Sensors for the Evaluation of Structural Integrity of Inflatable Habitats

    SBC: NANOSONIC INC            Topic: T1203

    Inflatable pressurized habitats are envisioned as a practical way to build shelters much larger than landing craft for astronauts and their scientific operations on Mars, the moon and elsewhere. These habitats maintain their inflated shape via high-strength Vectran webbing. The piezoresistive extensometers developed through this STTR program can be directly integrated into or onto Vectran webbing ...

    STTR Phase II 2017 National Aeronautics and Space Administration
  5. Unified In-Space Propulsion Framework for Prediction of Plume-Induced Spacecraft Environments

    SBC: CFD RESEARCH CORPORATION            Topic: T102

    Chemical contamination of spacecraft components as well as thermal and force loading from firing liquid propellant thrusters are critical concerns for in-space propulsion applications. Gas molecular contamination and liquid droplet deposition due to incomplete combustion threaten to damage surface materials, sensitive instruments and optical sensors, and poses major risks for mission success. Liqu ...

    STTR Phase II 2017 National Aeronautics and Space Administration
  6. Combat Systems of the Future

    SBC: Advanced Systems/Supportability Engineering Technologies And Tools, Inc.            Topic: N05149

    The S-351 mini-sub is a prototype of the Dry Combat Submersible (DCS). This prototype was established as a means of risk reduction prior to a full commitment to the DCS program. Both of these platforms have an operational need to transit with minimum operator fatigue safely to a pre-defined point and covertly deploy and retrieve SEALS. To meet these operational needs, these platforms require upgra ...

    STTR Phase II 2017 Department of DefenseSpecial Operations Command
  7. High Performance Simulation Tool for Multiphysics Propulsion Using Fidelity-Adaptive Combustion Modeling

    SBC: STREAMLINE NUMERICS, INC.            Topic: T102

    The innovation proposed here is a fidelity-adaptive combustion model (FAM) implemented into the Loci-STREAM CFD code for use at NASA for simulation of rocket combustion. This work will result in a high-fidelity, high-performance multiphysics simulation capability to enhance NASA's current simulation capability of unsteady turbulent reacting flows involving cryogenic propellants. This novel FAM m ...

    STTR Phase I 2017 National Aeronautics and Space Administration
  8. Launch Weather Decision Support System

    SBC: Radiometrics Corporation            Topic: T103

    Launch safety and efficiency requires timely and accurate wind, thermodynamic and pressure information from the surface to 20 km height, and lightning risk identification. A Doppler radar now provides wind measurements that satisfy this requirement at the Eastern Test Range. Thermodynamic soundings are provided by intermittent radiosondes on launch day. Typical intervals of an hour or more between ...

    STTR Phase I 2017 National Aeronautics and Space Administration
  9. Maneuvering Environment for Tiltwing Aircraft with Distributed Electric Propulsion

    SBC: EMBEDDED DYNAMICS LLC            Topic: T1501

    The tiltwing class of aircraft consists of vehicles with the ability to rotate the wing and propulsion system as a unit a full 90 degrees from the standard fixed wing configuration to one in which the wing and thrust axis become perpendicular to the body axis. This thrust vectoring capability allows the aircraft to utilize thrust borne flight for vertical takeoff and landing as well as the convent ...

    STTR Phase I 2017 National Aeronautics and Space Administration
  10. uG-LilyPond- Floating Plant Pond for Microgravity

    SBC: Space Lab Technologies, LLC            Topic: T702

    The proposed μG-LilyPond is an autonomous environmentally controlled floating plant cultivation system for use in microgravity. The μG-LilyPond concept expands the types of crops that can be grown on a spacecraft in a flexible, efficient, low maintenance package. The μG-LilyPond features several innovations relative to state of the art, including passive water and nutrient delivery to floating ...

    STTR Phase I 2017 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government