Award Data

The tracking of critical flow features (CFFs) such as stagnation point, flow separation, shock, and transition in flight provides insight into actual aircraft performance/safety. Sensing of these CFFs across flight regimes involves numerous challenges such as a wide temperature/pressure range from subsonic to hypersonic flows. Tao Systems, Mesoscribe Technologies and Virginia Tech propose to devel ...

NASA's long range goals of reducing the fuel consumption by 30% and increasing fuel efficiency by 35% can be partially accomplished through increasing engine operation temperatures. As a result, the disk section is desired to operate in increasingly higher temperatures, which will subject it to additional degradation mechanisms of oxidation and hot corrosion. One approach to enhance the tem ...

The proposed solution exploits recent advances in computer vision to conceive of a single-camera + gyro + accelerometer vision-based navigation solution such that the processing will be lightweight (requiring only a single optical flow sample per frame). Known landmarks (natural or artificial) will have absolute positions known to planetary exploration worker robots. The worker robot can identif ...

The innovative methodologies proposed in this STTR Phase 1 project will enhance Loci-STREAM which is a high performance, high fidelity simulation tool already being used at NASA for a variety of CFD applications. This project will address critical needs in order to enable fast and accurate simulations of liquid space propulsion systems (using propellants such as LOX, LCH4, RP-1, LH2, etc.). The pr ...

Thermal Stir Welding (TSW) provides advancement over the more conventional Friction Stir Welding (C-FSW) process because it separates the primary processes variables thereby allowing independent control of metal stirring and forging from the stir zone temperature. However, the feedback for precise control of the stir zone temperature, and hence the process parameters to sustain that temperature wi ...

The objective of this proposal is to develop three unique energy harvesting technologies utilizing our existing research strengths that will be of interest and utility to NASA applications and environmental conditions. By developing multiple technologies, NASA will be able to harvest energy from multiple waste energy sources, namely environmental vibrations, thermal energy, and solar flux. These d ...

The process of aircraft design requires the integration of data from individual analysis of aerodynamic, structural, thermal, and behavioral properties of a flight vehicle. At present, there is no simple way to integrate the results of the analyses early in the design process. Aurora Flight Sciences and the Massachusetts Institute of Technology Aerospace Computational Design Laboratory propose to ...

Space policy direction is shifting, particularly with respect to human goals. Given the uncertainty of future missions to the moon, Mars, and other bodies, a tool that allows for informed analysis of the option space is particularly relevant. Aurora Flight Sciences and MIT propose to further develop the Multi-Robot Planetary Exploration Architecture (MRPEA) methodology, a suite of software tools ...

The proposed innovation is the replacement of existing test stand and parking lot fixtures with current SSL LED technology. The replacement fixtures will reduce energy consumption, generate less heat and provide maintenance free operation for over 50,000 hours. An explosion-proof fixture is capable of containing an internal combustion event without allowing flames or hot gasses to escape to the s ...

Thermoelectric (TE) devices already found a wide range of commercial, military and aerospace applications. However, at present commercially available TE devices typically offer limited heat to electricity conversion efficiencies, well below the fundamental thermodynamic limit, calling for the development of higher efficiency materials. The team of MicroXact Inc., Virginia Tech and Sundew Technolog ...