You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Small Team Command, Control, Communications and Situational Awareness (C3SA), SOCOM08-001

    SBC: CEEBUS TECHNOLOGIES, LLC            Topic: SOCOM08001

    SOF combat swimmers have a need for the continuous monitoring of each others relative position while diving and for the capability of being able to communicate with each other to help establish a common operational picture (COP).The C3SA system was previously developed under SBIR Topic SOCOM08-001 thru the receipt of both Phase I and Phase II SBIR awards.The C3SA established a stand-alone network ...

    STTR Phase II 2018 Department of DefenseSpecial Operations Command
  2. Demonstration of the technological capability for production of neutron-focusing nickel mirrors

    SBC: ELECTROFORMED NICKEL, INC.            Topic: 15a

    Neutron scattering is one of the most useful methods of studying the structure and dynamics of matter. These methods require large installations at national laboratories, such as Oak Ridge National Laboratory (ORNL), National Institute of Standards and Technology (NIST) and other facilities constructed or planned in the US and around the world. These facilities serve a large and diverse community ...

    STTR Phase II 2018 Department of Energy
  3. Low-cost and Flexible Transparent Electrodes Based on Ag–ZTOF (Zn–Sn–O–F) Amorphous Composites Through Ink-jet Printing

    SBC: HAZEN RESEARCH, INC.            Topic: 09b

    Sn-doped In2O3 (ITO) is the industry standard and most widely used transparent conducting electrode (TCE) because of its good electrical and optical properties. However, ITO has a number of disadvantages: ITO is not a suitable TCE for next-generation, high-efficiency, flexible OLEDs, because of its inappropriate work function, difficulty in creating desired patterns, low stability, delaminantion d ...

    STTR Phase I 2018 Department of Energy
  4. A Concrete Additive Manufacturing Process for Fixed and Floating Wind Turbine Foundations and Towers

    SBC: JC Solutions            Topic: 14b

    Tall towers and foundations for modern offshore and land-based wind turbines are too large to transport over roads or rail due to their extremely large dimensions. Existing “one-off” on-site construction methods are too expensive, and are too slow for manufacturing foundations and towers in the large numbers needed, especially for offshore components manufactured in ports with limited lay-down ...

    STTR Phase I 2018 Department of Energy
  5. CORC; Cable Based High Field Hybrid Magnets for Future Colliders

    SBC: Advanced Conductor Technologies LLC            Topic: 26b

    "The next generation of very high field accelerator magnets (20 T or more) are expected to be made with high-temperature superconductors (HTS) along with conventional low-temperature superconductors (LTS) to reduce cost. The operation and protection of these magnets becomes very challenging particularly if the HTS coils are made with the tapes and operate at a much lower current than the LTS coils ...

    STTR Phase II 2018 Department of Energy
  6. Scaleup of a Combined Spray Pyrolysis and Fluidized-bed Reactor Method for the Production of High Performing Layered Nickel- rich Cathode Materials as a Continuous Process

    SBC: HAZEN RESEARCH, INC.            Topic: 14a

    To increase the utilization of electric vehicles, the US Department of Energy is seeking to reduce the cost of electric vehicle batteries to less than $125/kWh by 2022. To achieve this goal, the costs of cathode materials, which account for approximately 30% of the cost of vehicle batteries, must be reduced significantly. To address the challenge of lowering the costs of advanced lithium battery c ...

    STTR Phase II 2018 Department of Energy
  7. Novel Sulfonated Block Copolymers for Efficient Electrochemical Hydrogen Compression

    SBC: Sustainable Innovations, LLC            Topic: 17d

    According to a report by the Hydrogen Council, a global lobby set up in January 2017 by Toyota and Air Liquide that includes 27 members such as automakers Audi, BMW, Daimler, Honda and Hyundai, and energy firms Shell and Total, increasing the use of hydrogen in power, transport, heat and industry could deliver around one fifth of the total carbon emissions cuts needed to limit global warming to sa ...

    STTR Phase I 2018 Department of Energy
  8. An in-situ device to monitor root-soil-microbe interactions

    SBC: HI Fidelity Genetics, Inc.            Topic: 22a

    Finding better ways to measure rhizosphere properties has the potential to transform agriculture. Better understanding of the root-microbe-soil interactions that characterize the rhizosphere will help reduce fertilizer, pesticide, and herbicide inputs, improve effective carbon dioxide sequestration, enhance biofuel crop production, and lead to more efficient farms with higher profitability. But th ...

    STTR Phase I 2018 Department of Energy
  9. A microfluidic ice nucleating particle counter for continuous measurements from small aerial platforms

    SBC: Handix Scientific Inc.            Topic: 23a

    Quantifying atmospheric aerosol, clouds and precipitation processes are critical needs for understanding and interpreting Earth’s changing energy budget, is a DOE objective, and is of broader benefit to the public. Specifically, the formation of ice in the atmosphere depends on the nature and abundance of ice nucleating particles, and has major implications for precipitation and cloud interactio ...

    STTR Phase I 2018 Department of Energy
  10. Low-cost, time-resolved chemical characterization of atmospheric aerosols

    SBC: Aerosol Devices Inc.            Topic: 23b

    Currently the chemical composition of atmospheric particulate matter is measured either by off-line analyses of time-integrated filter samples, or by in-situ instruments requiring near-constant operator oversight. These measurement approaches result in sparse or limited data coverage. Despite the critical role of composition on the health and environmental impacts of particulate matter, there exis ...

    STTR Phase I 2018 Department of Energy
US Flag An Official Website of the United States Government