Award Data

During Phase I and Phase II, M4 Engineering, Inc. and Sandia National Laboratories have created a unique bonded joint analysis methodology and associated software. During Phase II.5, the developed techniques will be further enhanced and a fully functional commercial analysis code (SIMULIA/Abaqus) plug-in will be created. The software plug-in will make the advanced technology accessible to all leve ...

Towing of a Magnetic Anomaly Detection (MAD) system is an important aspect of rotorcraftmaritime operation. The oscillatory rotorcraft combined with the long and flexible towingcable, the low mass ratio of the towed body to the towing aircraft, and the rotor wake effecton the towed body presents a challenge for integration of a modern MAD system withrotorcraft platform. The research objective is t ...

A critical aspect of exoskeleton control that has to date introduced a performance limitation is the ability of the exoskeleton to recognize the intent of the operator so it can apply assistance to their desired motion. This intent recognition effort is typically solved using ad-hoc methods where subject matter experts make design decisions and tune transitions to identify intended maneuvers as re ...

The Navy has a need to control such extreme power specifications that no suitable switches exist. The Navy power specifications require us to develop a novel medium (probably a pressurized gas or liquid) that can be configured to meet the requirements and control the flow of electrical power directly. Our extensive switching expertise has allowed us to develop a series of novel test fixtures and t ...

This proposal is a collaborative effort between MRV Systems and the Woods Hole Oceanographic Institution. The goal is to develop a new, small, inexpensive autonomous vehicle to investigate mixed layer dynamics and turbulent mixing. The preliminary Phase I design, a Diagonally Operating Platform (DOP), is a profiling float with moveable fins. DOP will turn toward an intended direction within a few ...

Digital equalizers have been the major enablers in RF communications in terms of managing component imperfections and channel impairments. Specifically, the ever increasing processing power of the dedicating computing processors has availed a steady increase in the ability of complex communication systems to deal with impairments as well as allowing higher capacities in the information transfer.On ...

Innovative Veterinary Medicine, Inc. has conceptualized and designed an anesthesia ventilator named DolVent™ specifically for the Navy Atlantic bottlenose dolphins and California sea lions. The DolVent™ ventilator design will support the normal physiologic state of these animals using ventilation modes mimicking their natural breathing including the modes of Airway Pressure Release Ventilation ...

Additive manufacturing (AM) is a very promising technique for rapid, low-cost production of aircraft parts directly from a CAD file. AM is especially appealing for complex parts that would be costly or impossible to fabricate by machining or casting. At the current time there are no reliable, cost-effective techniques to qualify the finished parts. Several government studies have noted this gap an ...

Ultrasound is a therapeutic modality which has been used clinically for 60 years, but has been limited in practice by the complexity of the technology. Recent research has allowed for the development of a portable, wearable, long duration, low intensity therapeutic ultrasound system. The system is powered by battery, and can be applied by a user to deliver up

MZA partnered with the University of Notre Dame proposes to transition the Navys HEFL Beam Director Subsystem (HBDS) for flight testing on the Airborne Aero-Optics Laboratory Transonic (AAOL-T) aircraft. We will reconfigure the HBDS integrating structure and aft beam control system to fit the cabin constraints of the AAOL-T aircraft with an aft beam control and scoring bench. Operational functiona ...