You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Innovative Wound Regeneration Support Approaches to Enable Rapid Treatment of Wounded Warfighters

    SBC: Zetroz Systems LLC            Topic: A14AT016

    Ultrasound is a therapeutic modality which has been used clinically for 60 years, but has been limited in practice by the complexity of the technology. Recent research has allowed for the development of a portable, wearable, long duration, low intensity therapeutic ultrasound system. The system is powered by battery, and can be applied by a user to deliver up

    STTR Phase II 2016 Department of DefenseDefense Health Agency
  2. Organic-Inorganic Hybrid Nanocomposite as Radiation-resistant Electrical Insulator

    SBC: Innosense Llc            Topic: 20

    The Department of Energy needs improved radiation resistant electrical insulation materials for the superconducting magnet coils in fusion reactors. To achieve safe, reliable, economic and environmentally benign fusion energy system, DOE is seeking organic/inorganic insulation-capable materials that are wrappable. These materials under irradiation will enable magnet coils to: (1) operate reliably ...

    STTR Phase I 2016 Department of Energy
  3. High Gradient Accelerating Structure for Low Energy Protons

    SBC: RadiaBeam Systems, LLC            Topic: 25

    Currently, the most promising types of radiotherapy is proton or carbon therapy, as they have demonstrated significant improvements in clinical efficiency and reduced toxicity profiles. Unfortunately, the high cost of treatments using both proton and carbon beams is the limiting factor preventing hadron therapy from becoming the standard of care for a wider range of cancers. Designing a linear acc ...

    STTR Phase I 2016 Department of Energy
  4. High power, magnet-free, circulator using angular-momentum biasing of a resonant ring

    SBC: Calabazas Creek Research, Inc.            Topic: 25

    There is a continuing need for high power circulators to protect the next generation of high power RF sources from waveguide reflections that can destroy the device. Currently, the power level of circulators is limited by the materials, specifically ferrites that provide the required non-reciprocal operation. New approaches are required that use materials capable of very high power operation. Stat ...

    STTR Phase I 2016 Department of Energy
  5. A miniature, low-cost black carbon sensor for unmanned platforms

    SBC: Handix Scientific Inc.            Topic: 17b

    Achieving a systems-level understanding of science associated with climate change is a key topic within the DOE mission. Light absorbing particles are an important atmospheric constituent and have a direct impact on climate. They also impact air quality and health and human activities play a major role in their abundance and distribution. There is a critical need for improved observational capacit ...

    STTR Phase I 2016 Department of Energy
  6. Membranes and Materials for Energy Efficiency- Subtopic d) Other. Title: Polysulfide-Blocking Polymer Membrane Separators for Rechargeable Lithium-Sulfur Batteries

    SBC: Sepion Technologies            Topic: 12a

    Renewable sources of energy including solar and wind are fast gaining ground on fossil fuels, in part because of their sustainability and environmental benefits. A major issue, however, has been finding efficient ways to store the energy that renewables generate for use when the demand for energy is high. Lithium-­‐sulfur batteries, which store electrical energy by transferring electrons to or ...

    STTR Phase I 2016 Department of Energy
  7. Development of powder bed printing (3DP) for rapid and flexible fabrication of energetic material payloads and munitions

    SBC: MAKEL ENGINEERING, INC.            Topic: DTRA16A001

    This program will demonstrate how additive manufacturing technologies can be used with reactive and high energy materials to create rapid and flexible fabrication of payload and munitions. Our primary approach to this problem will be to use powder bed binder printing techniques to print reactive structures. The anticipated feedstock will consist of composite particles containing all reactant spe ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  8. High Fidelity Computational Models for Aggregated Tissue Interaction in Surgical Simulations

    SBC: CFD Research Corporation            Topic: DHP16A001

    Surgical simulations aiming to support surgeon practices and medical education have attracted enormous research effort over the last two decades. However, the physical reality, especially on simulating aggregated tissue interaction, is still unsatisfactory. In this proposed work, an open source surgery simulation framework, SoFMIS, will be utilized and enhanced with tissue interaction models to a ...

    STTR Phase I 2016 Department of DefenseDefense Health Agency
  9. Bio-mathematical Models of Aggregated Tissues & Organ Properties

    SBC: Corvid Innovation LLC            Topic: DHP16A001

    Realistic surgical simulation requires a combination of representative tissue geometry, accurate tissue material properties and lifelike tool-tissue interaction forces. Recent advances in computational power and imaging modalities have provided the capability to represent the anatomical details required for surgical training; however, the mathematical models which govern the underlying tissue pro ...

    STTR Phase I 2016 Department of DefenseDefense Health Agency
  10. Low-Cost, High-Accuracy, Whole-Building Carbon Dioxide Monitoring for Demand Control Ventilation

    SBC: DIOXIDE MATERIALS, INC.            Topic: 11

    The objective of the proposed work is to develop, demonstrate, and evaluate new technologies for low-cost, high-accuracy, whole-building CO2 monitoring for demand control ventilation. The work builds on a private/public partnership formed between Dioxide MaterialsTM and the Institute for Sensing and Embedded Network Systems Engineering (I-SENSE) at Florida Atlantic University. In previous, NSF-sup ...

    STTR Phase I 2016 Department of Energy
US Flag An Official Website of the United States Government