You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. STTR Phase II:Integrated Powered Knee-Ankle Prosthetic System

    SBC: Ekso Bionics Inc            Topic: EO

    This Small Business Technology Transfer (STTR) Phase II project proposes the development of an integrated powered knee-ankle prosthesis. The objective of this proposal is to investigate the use of integrated powered knee and ankle joints in trans-femoral prostheses that use sensory information from the ground and the wearer. The hypothesis is that a prosthesis with actively powered knee and ankle ...

    STTR Phase II 2010 National Science Foundation
  2. STTR Phase I: New Manufacturing Techniques to Produce High Quality Thin Films of Inherently Conducting Polymer Nanofibers Over a Large Area

    SBC: Fibron Inc.            Topic: MM

    This Small Business Technology Transfer (STTR) Phase I project aims to develop a manufacturing process that can coat a variety of substrates with uniform thin films of inherently conducting polymer (ICP) nanofibers over a large area. Traditionally, these nanostructured organic materials are difficult to process into thin films covering a large area, which has limited the commercial applicability ...

    STTR Phase I 2010 National Science Foundation
  3. Exploiting the Mating Phenotype of Chlamydomonas reinhardtii to Enhance Harvesting in Large-Scale Oil Production from Algae

    SBC: KENT SEATECH CORPORATION            Topic: A10

    This STTR Phase I project proposes to develop and establish a novel clumping (flocculation) strain of algal using an engineered extracellar protein that can be induced. The overarching goal is to provide the industry with a novel, energy efficient, and cost effective tool to dewater microalgae. What are the broader/commercial impacts of the proposed project? The broader/commercial impact of the p ...

    STTR Phase I 2010 National Science Foundation
  4. STTR Phase I: Piezoresistive Nanocomposite Elastomer

    SBC: NanoComposites Inc.            Topic: MM

    This Small Business Technology Transfer Phase I project seeks to develop a flexible, pressure-sensitive membrane comprising chemically functionalized multiwalled carbon nanotubes (f-MWCNTs) to address several issues that hamper the use of existing piezoresistive membrane materials: a) interfacial integrity, b) fatigue life related to the number of pressure application cycles, and c) cost effective ...

    STTR Phase I 2010 National Science Foundation
  5. STTR Phase I:Targeted nanotubes for photothermal ablation therapy

    SBC: Medical Nanotechnologies, Inc.            Topic: MM

    This Small Business Technology Transfer Research (STTR) Phase I project uses single-wall carbon nanotubes (SWNTs) conjugated with monoclonal antibodies (MAbs) to target the SWNTs to tumor cells. SWNTs convert near-infrared (NIR) light to heat and enable the selective photo-thermal ablation of tumor cells upon irradiation of tissues with NIR. To achieve the goal of targeted photo-thermal ablation o ...

    STTR Phase I 2010 National Science Foundation
  6. STTR Phase I: Bistable Electroactive Polymers for Refreshable Braille Displays

    SBC: Polyradiant            Topic: MM

    This Small Business Technology Transfer Program Phase I project aims to develop a refreshable Braille display for the blind. Existing Braille technologies require complicated mechanical designs that are bulky and too expensive for personal use. A new technology based on a new smart material (bistable electroactive polymer) will be developed to enable a Braille dot array on a thin flat panel. The ...

    STTR Phase I 2010 National Science Foundation
  7. STTR Phase I: Up-Cycling: Waste Acid for Green Products

    SBC: Clear Carbon Innovations            Topic: MM

    This STTR Phase I project will develop a process to produce silica products from the waste stream of a patent pending activated carbon manufacturing process (carbonxt process). The project focuses on using the silica for Silica-Titania Composites but would also take into account markets that employ precipitated or gel silica which would have differing properties than the silica used in Silica-Tit ...

    STTR Phase I 2010 National Science Foundation
  8. STTR Phase I: Low-cost naostructured anti-reflection coatings for solar energy applications

    SBC: CSD Nano            Topic: MM

    This Small Business Technology Transfer (STTR) Phase I project aims to fabricate anti-reflective coatings (ARC) for solar energy applications. The approach is to use a convective and evaporation-induced assembly to deposit organized nanostructures and create sub-wavelength quasi repeating structures at lower cost than the repeating structures from photolithography. In this project, a Microreacto ...

    STTR Phase I 2010 National Science Foundation
  9. STTR Phase I: New polymers for 10% efficiency organic photovoltaic cells

    SBC: SOLARMER ENERGY, INC.            Topic: MM

    This Small Business Technology Transfer (STTR) Phase I project aims to develop high efficiency polymers for organic photovoltaic cells (OPVs). OPVs based on polymers are ideal for environmentally-benign and affordable energy generation. However, the efficiency of OPVs is still low compared to their inorganic counterparts, currently at 7.9%. One of the major reasons is the lack of polymers with ...

    STTR Phase I 2010 National Science Foundation
  10. STTR Phase II: Lower Extremity Exoskeleton Assist Device for Reducing the Risk of Back Injuries among Workers

    SBC: Ekso Bionics Inc            Topic: AM

    This Small Business Technology Transfer (STTR) Phase II project proposes will study the technology barriers associated with creating exoskeleton assist devices for workers in distribution centers and automobile assembly plants. By using these devices, workers can dramatically reduce the load in the vertebrae of the lower back when maneuvering parts and boxes. The assist device will take the majori ...

    STTR Phase II 2010 National Science Foundation
US Flag An Official Website of the United States Government