You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. High Fidelity Computational Models for Aggregated Tissue Interaction in Surgical Simulations

    SBC: CFD RESEARCH CORPORATION            Topic: DHP16A001

    Surgical simulations aiming to support surgeon practices and medical education have attracted enormous research effort over the last two decades. However, the physical reality, especially on simulating aggregated tissue interaction, is still unsatisfactory. In this proposed work, an open source surgery simulation framework, SoFMIS, will be utilized and enhanced with tissue interaction models to a ...

    STTR Phase I 2016 Department of DefenseDefense Health Agency
  2. Innovative Wound Regeneration Support Approaches to Enable Rapid Treatment of Wounded Warfighters

    SBC: Zetroz Systems LLC            Topic: A14AT016

    Ultrasound is a therapeutic modality which has been used clinically for 60 years, but has been limited in practice by the complexity of the technology. Recent research has allowed for the development of a portable, wearable, long duration, low intensity therapeutic ultrasound system. The system is powered by battery, and can be applied by a user to deliver up

    STTR Phase II 2016 Department of DefenseDefense Health Agency
  3. Rapid Development of Weapon Payloads via Additive Manufacturing

    SBC: MATSYS INCORPORATED            Topic: DTRA16A001

    MATSYS proposes to adapt emerging additive manufacturing techniques (so-called 3-D Printing) for use with reactive structural materials and demonstrate this capability to rapidly fabricate reactive case. Our concept incorporates two major manufacturing steps: 3D printing of green compacts from pure Al or Al-based reactive powder blend; and Microwave (MW) sintering of green compacts into net-shaped ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  4. Self-fragmenting Structural Reactive Materials (SF-SRM) for High Combustion Efficiency

    SBC: MATSYS INCORPORATED            Topic: DTRA16A002

    MATSYS proposes to develop, test and evaluate a scalable metal-based reactive structural material that will self-fragment to micron or sub-micron scale fuel particles when subjected to explosive shock loading, resulting in significantly enhanced metal combustion efficiency. Use of reactive material casings offers the potential for several-fold increases in blast and overpressure by generating rapi ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  5. Portable and Automated Radiation Effects Test Structures for Advanced Technology Nodes

    SBC: MICROELECTRONICS RESEARCH DEVELOPMENT CORPORATION            Topic: DTRA16A003

    Micro-RDC will develop portable radiation effects test structures that scales to new process nodes. These structures will enable the investigation of the effects of radiation on the new technology from the material processing level as well as the circuit level. The production of the chosen structures and the development of software to extract the model parameters will form the framework. A suit ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  6. Biofidelic Rat Surrogate for Blast-Induced Neurotrauma Studies

    SBC: CREARE LLC            Topic: A17AT022

    Blast-induced Traumatic Brain Injury (TBI) is a major threat to the health of military personnel serving in modern theaters. As such, the biomechanical injury pathways of TBI are and have been the focus of many animal studies. However, differences in the experimental setups across laboratories make it difficult to draw definitive conclusions from the resulting data. A tool that can accurately e ...

    STTR Phase I 2017 Department of DefenseDefense Health Agency
  7. Passive Pneumatic Prosthetic Ankle with Biomimetic Response

    SBC: ADA TECHNOLOGIES, INC.            Topic: DHP16C007

    The Defense Health Program seeks to improve the lives of service members suffering below knee amputations through the development of a non-powered lower extremity prosthesis designed to restore range of motion and power generation to that of an uninjured anatomical ankle. Current passive systems are still in early stages of development and typically only address one aspect of what the Defense Heal ...

    STTR Phase I 2017 Department of DefenseDefense Health Agency
  8. Electrotextile Systems for Human Signatures Monitoring

    SBC: MANTEL TECHNOLOGIES, INC.            Topic: DHA17A001

    Investments by the Department of Defense (DOD) have led to the development and demonstration of electronic textiles capable of transforming traditional textile systems into wearable power and data systems. The Defense Health Agency (DHA) has identified an opportunity to leverage advancements in smart garment systems for military personnel to aid in the prediction in performance declines and healt ...

    STTR Phase I 2017 Department of DefenseDefense Health Agency
  9. Advanced Morphing Moulage for Medical Training (AMM-MT)

    SBC: VCOM3D INC            Topic: DHA17A002

    For this Phase I SBIR proposal, Vcom3D proposes to design advanced medical moulage that accurately simulates the progression of an injury or pathology by morphing through a series of clinical states to enable learners to confirm the progression of the wound and to determine whether iatrogenic errors or pathologies occurred duing treatment. The physical morphing moulage may be applied to medical m ...

    STTR Phase I 2017 Department of DefenseDefense Health Agency
  10. Smart Morphing Moulage Medical (SM3) Training Platform

    SBC: LUNA INNOVATIONS INCORPORATED            Topic: DHA17A002

    Medical moulage is used in medical training to simulate injuries or pathologies, however current moulage is static and does not provide the trainee feedback on the quality of care or ultimate outcome of that care. Allowing a trainee to witness the injury or pathology -morph- while treatment is being provided can provide feedback on any potential mistreatment and enhance the learning and proficienc ...

    STTR Phase I 2017 Department of DefenseDefense Health Agency
US Flag An Official Website of the United States Government