You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Combat Systems of the Future

    SBC: Advanced Systems/Supportability Engineering Technologies And Tools, Inc.            Topic: N05149

    The S-351 mini-sub is a prototype of the Dry Combat Submersible (DCS). This prototype was established as a means of risk reduction prior to a full commitment to the DCS program. Both of these platforms have an operational need to transit with minimum operator fatigue safely to a pre-defined point and covertly deploy and retrieve SEALS. To meet these operational needs, these platforms require upgra ...

    STTR Phase II 2017 Department of DefenseSpecial Operations Command
  2. Liquid cooled viscoelastic actuation for robust legged robot locomotion

    SBC: Apptronik, Inc.            Topic: H601

    Apptronik Systems in cooperation with the University of Texass Human Centered Robotics Lab (HCRL), Carnegie Mellon Universitys Robotics Institute and Italys National Research Institute (CNR), will collaborate to develop a new type of exoskeleton that is founded upon Apptroniks Visco-Elastic Liquid Cooled Actuator (VLCA). The fundamental goal of this program is the development of a powered exoskel ...

    STTR Phase II 2017 Department of DefenseSpecial Operations Command
  3. Upper Body Addendum to Proposal S2-0328

    SBC: Apptronik, Inc.            Topic: H601

    This is an Addendum to previously submitted proposal that includes the addition of a powered upper body portion of an exoskeleton. In this addendum we propose the additional requirements of researching, fabricating and integrating a powered upper body to the previously outlined lower body. These two systems together will comprise the entire exoskeleton proposed by the contractor. Through this ...

    STTR Phase II 2017 Department of DefenseSpecial Operations Command
  4. Liquid-cooled actuation to achieve greater degrees of freedom and range of motion in untethered exoskeletons

    SBC: Apptronik, Inc.            Topic: H6018135

    Apptronik Systems Inc., in cooperation with the University of Texas Human Centered Robotics Lab (HCRL) and Huston-Tillotson University Robotics Lab (a historically black college and university HBCU), endeavor to advance the movement capabilities and modularity of the exoskeleton being developed under contract #H92222-17-C-0050. The primary goal of this program is to optimize the range of movement ...

    STTR Phase II 2017 Department of DefenseSpecial Operations Command
  5. Novel Mixed-mode TCAD-Commercial PDK Integrated Flow for Radiation Hardening By Design

    SBC: CFD Research Corporation            Topic: DTRA16A003

    Cost-effective application of advanced commercial electronics technologies in DoD space systems requires early development of radiation-hardened-by-design (RHBD) techniques, and use of simulations is critical to the efficiency of this process. CFDRC has developed an integrated, mixed-mode simulation approach allowing their NanoTCAD device physics simulator to interface with commercial circuit simu ...

    STTR Phase I 2017 Department of DefenseDefense Threat Reduction Agency
  6. Compact Laser Drivers for Photoconductive Semiconductor Switches (16-RD-863)

    SBC: UES, Inc.            Topic: DTRA16A004

    Compact Electromagnetic Pulse Module (EMP) capable of being arranged in series-parallel planar or cylindrical arrays is needed to simulate nuclear weapon effects. High gain optically triggered photoconductive semiconductor switches (PCSS) based on Gallium arsenide (GaAs) with low timing jitter enables the development of planar or phased arrays of modular EMP or High Power Microwave (HPM) sources. ...

    STTR Phase I 2017 Department of DefenseDefense Threat Reduction Agency
  7. Production of Chemical Reagents for Prompt-Agent-Defeat Weapons

    SBC: Nalas Engineering Services Inc            Topic: DTRA14B001

    Nalas Engineering and Johns Hopkins University collaborated in a Phase I STTR program to study reactive mixtures of HI3O8 and nanocomposite fuels previously developed by the Weihs Group. These fuel/oxidizer mixtures are uniquely able to simultaneously produce heat and biocidal iodine gas, a combination designed to destroy biological weapons. The team at Nalas focused on evaluating conditions for p ...

    STTR Phase II 2017 Department of DefenseDefense Threat Reduction Agency
  8. Semantic Parsing and role Labeling In Combination Effort (SPLICE)

    SBC: DECISIVE ANALYTICS CORPORATION            Topic: DTRA14B003

    To Counter Weapons of Mass Destruction (CWMD), DTRA must analyze data from numerous sources about a diverse set of technologies and activities. The extreme diversity in content and the volume of DTRAs data combine to produce one of the most challenging analysis problems in the government. The CWMD mission therefore requires deep analysis - an in-depth understanding of all available data and correl ...

    STTR Phase II 2017 Department of DefenseDefense Threat Reduction Agency
  9. Portable and Automated Radiation Effects Test Structures for Advanced Technology Nodes

    SBC: Microelectronics Research Development Corporation            Topic: DTRA16A003

    Micro-RDC will develop portable radiation effects test structures that scales to new process nodes. These structures will enable the investigation of the effects of radiation on the new technology from the material processing level as well as the circuit level. The production of the chosen structures and the development of software to extract the model parameters will form the framework. A suit ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  10. Rapid Development of Weapon Payloads via Additive Manufacturing

    SBC: Matsys Incorporated            Topic: DTRA16A001

    MATSYS proposes to adapt emerging additive manufacturing techniques (so-called 3-D Printing) for use with reactive structural materials and demonstrate this capability to rapidly fabricate reactive case. Our concept incorporates two major manufacturing steps: 3D printing of green compacts from pure Al or Al-based reactive powder blend; and Microwave (MW) sintering of green compacts into net-shaped ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
US Flag An Official Website of the United States Government