You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Information-based Norms on Flow, Operations, and Traffic Over Networks (INFOTON)

    SBC: ISEA TEK, LLC            Topic: N18AT027

    The Internet of Things (IoT) connects people, data, and "things" (e.g., software, sensors, platforms), facilitating the translation of information into actions. Although naval platforms’ networks and communication suites have evolved significantly in the past few years to support such required connectivity, one of the greatest technical challenges still facing the military community is the proce ...

    STTR Phase I 2018 Department of DefenseNavy
  2. Brain Targeting Nanoparticle for Drug Delivery in Traumatic Brain Injury

    SBC: Weinberg Medical Physics, Inc.            Topic: DHA18A001

    There is an urgent need to bypass or cross the blood brain barrier (BBB) to deliver drugs for TBI treatment. This project aims to develop targted intranasally delivered, magnetically propulsed, and targted nanoparticles for traumatic brain injury (TBI). In Phase I, we will demonstrate the design, fabrication, and in vitro characterization of proposed drug laden magnetic nanoparticles as well as co ...

    STTR Phase I 2018 Department of DefenseDefense Health Agency
  3. ECCCHO: Effective Combat Casualty Care Handoff Operations

    SBC: Tier 1 Performance Solutions, LLC            Topic: DHA17B002

    Approximately 70% of sentinel events in medical care are related to communication mishaps, and despite regular and frequent occurrence, an even higher percentage (80%) of severe medical errors are related to miscommunication during handoffs (i.e., the transferring of information, responsibility, and authority for patient care from one provider to another). The TiER1 team proposes to address challe ...

    STTR Phase I 2018 Department of DefenseDefense Health Agency
  4. Solid-state, Conformal Laser Enclosure Cooling System

    SBC: NANOHMICS INC            Topic: N18AT001

    The Thermoelectric coolers (TECs) are solid-state devices with no moving parts that provide reliable cooling power compared to traditional cooling systems such as vacuum compressors. However, their relatively high cost and low coefficient of performance (~ 0.5) have relegated them to niche applications such as small-scale portable coolers and, have yet, to be competitive from an efficiency standpo ...

    STTR Phase I 2018 Department of DefenseNavy
  5. Low-cost production of ultra-low defect GaN-based power electronics

    SBC: Qrona Technologies LLC            Topic: N18AT004

    GaN power semiconductors offer a technological breakthrough for improving the performance of power electronics including power density, conversion efficiency, and reliability of power converters. These are the three most critical requirements for military, aerospace and many commercial applications. In this STTR program, Qrona Technologies will collaborate with the University of Central Florida to ...

    STTR Phase I 2018 Department of DefenseNavy
  6. Hot Filament CVD technology for disruptive, high-throughput SiC epitaxial growth reactors

    SBC: TrueNano, Inc            Topic: N18AT004

    TrueNano, Inc. will in collaboration with the University of Colorado and industry partners, develop a novel single-wafer, high-throughput hot filament CDV reactor for the growth of high quality silicon carbide (SiC) epitaxial layers, suitable for the next generation of power electronic devices and systems. This includes the design and simulation of the reactor, the development of a throughput mode ...

    STTR Phase I 2018 Department of DefenseNavy
  7. Non-Destructive Concrete Interrogator and Strength of Materials Correlator

    SBC: Texas Research Institute, Austin, Inc.            Topic: N18AT006

    Phase I will determine the feasibility that one-sided measurements of low power, noninvasive, nondestructive microwave energy can be used to determine the strength and condition of concrete along with relevant spatial and statistical information. We will make different types of concrete with variations in constituent ratios as test samples; use ASTM tests to destructively determine true strength; ...

    STTR Phase I 2018 Department of DefenseNavy
  8. Additive Manufacturing for Naval Aviation Battery Applications

    SBC: Texas Research Institute, Austin, Inc.            Topic: N18AT008

    Texas Research Austin (TRI-Austin) will partner with the University of Texas, Austin, and will use diverse printing technologies to fabricate the components of selected battery chemistries (Li-ion, Zn-air, Zn-Ag). In the Phase I base period, each battery component will be printed with a technology that has been previously used to deposit the required material (i.e. ADM for metals, SLS for polymers ...

    STTR Phase I 2018 Department of DefenseNavy
  9. Autonomous Navigation for the Hull Bug Ship Hull Grooming System

    SBC: SeaRobotics Corporation            Topic: N18AT020

    The underpinning science and sensing associated with autonomous navigation is advancing on numerous fronts. The navigation capability required for ship hull grooming in a low visibility environment is a natural application of this technology. Enormous benefit will be realized in the public and private sectors of the shipping industry. The economic and environmental impact realized using proactive ...

    STTR Phase I 2018 Department of DefenseNavy
  10. A Hybrid Multifunctional Composite Skin Material by Standard Prepreg Lay-up Process

    SBC: KAI, LLC            Topic: N18AT024

    The objective of this project is to develop a hybrid, multifunctional composite material that improves the thermal and chemical stability, and surface durability of traditional carbon fiber reinforced polymer (CFRP) composites. By using a standard prepreg lay-up process, in which a flexible conductive ceramic thin layer is bonded directly onto the outmost layer of polymer composites to ensure the ...

    STTR Phase I 2018 Department of DefenseNavy
US Flag An Official Website of the United States Government