You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: ARCTOS Technology Solutions, LLC            Topic: DLA18A001

    Universal Technology Corporation (UTC) has teamed with the University of Dayton Research Institute (UDRI), Stratonics, and Macy Consulting to demonstrate not only the transitionability into commercial systems, but also to develop the data analytics and monitoring and control requirements to extract the full value fromseveral sensors, including the Stratonics ThermaViz, acoustic and profilometry se ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  2. Test Article Printing with Laser Additive Manufacturing (TAP-LAM) for Threat Surrogate Target Production

    SBC: MV Innovative Technologies LLC (DBA: Opt            Topic: MDA17T001

    Optonicus proposes development of the TAP-LAM (Test Article Printing with Laser Additive Manufacturing for Threat Surrogate Target Production) powder bed fusion and directed energy depositions systems. The TAP-LAM metal additive manufacturing system will advance strategic missile defense system testing capabilities by improving 3D printing methods to rapidly produce large-scale threat surrogate ta ...

    STTR Phase I 2018 Department of DefenseMissile Defense Agency
  3. Additive Manufacturing of Metallic Materials for High Strain Rate Applications

    SBC: MRL MATERIALS RESOURCES LLC            Topic: MDA17T001

    Metallic additive manufacturing (AM) is an attractive technology for the production of lethality test articles due to the potential for significantly reduced lead time and manufacturing cost.However, in order to be effective in providing accurate lethality data, the properties of the AM material have to match closely the properties of conventionally manufactured alloys found in real threat targets ...

    STTR Phase I 2018 Department of DefenseMissile Defense Agency
  4. Trajectory Simulation using PSM

    SBC: Triton Systems, Inc.            Topic: MDA17T002

    Triton Systems, Inc. proposes to develop a method for efficiently running federated simulations of atmospheric and orbital rocket flight. Tritons proposed method will be able to get information between time steps without the need for interpolation and will significantly reduce the computational time needed to run Federated simulations.Approved for Public Release | 18-MDA-9522 (23 Feb 18)

    STTR Phase I 2018 Department of DefenseMissile Defense Agency
  5. Lightweight Magnesium Components of a Missile Body

    SBC: Terves LLC            Topic: MDA17T004

    Magnesium alloys have 35% lower density compared to aluminum, with improved temperature stability compared to high strength aluminum.They can also be fabricated with minimum gauge thicknesses considerably thinner than fiber composites, and are weldable, with much higher impact resistance.Traditional magnesium alloys, however, have had lower strengths than more developed aluminum alloys.Powder meta ...

    STTR Phase I 2018 Department of DefenseMissile Defense Agency
  6. Metrology of thin films on sapphire substrate

    SBC: Optowares Incorporated            Topic: DMEA16B001

    There is a lack of non-destructive metrology tool to measure the thickness of thin films on sapphire substrate due to the transparency of the

    STTR Phase I 2017 Department of DefenseDefense Microelectronics Activity
  7. Advanced Chemistry and Radiation Modules for Hypersonic Signatures

    SBC: Spectral Sciences, Inc.            Topic: MDA15T003

    Karagozian & Case, Inc. (K&C) and the Georgia Institute of Technology (Georgia Tech) will develop a re-usable, cost-effective, and accurate dynamic characterization methodology capable of measuring the dynamic material properties of various materials of interest under very high strain rates. Materials property data for various ductile materials (e.g., steel and aluminum) are required as input to f ...

    STTR Phase I 2017 Department of DefenseMissile Defense Agency
  8. Aerospace Vehicle Signature Modeling Technologies

    SBC: GoHypersonic Incorporated            Topic: MDA15T003

    The proposed work will incorporate the newly released software into the signature analysis workflow. Extensions of the US3D flow solver will include improvements to the decoupled implicit solver to robustly and efficiently handle reacting flow. Trajectory specification, conjugate vehicle heating, and ablation with surface recession will be enabled through use of a Trajectory Ablation & Shape Chang ...

    STTR Phase I 2017 Department of DefenseMissile Defense Agency
  9. Fine Powder Cathode and Separator Binder Characterization for Thermal Batteries

    SBC: CFD Research Corporation            Topic: MDA16T001

    Fine powder thermal battery cathode materials can exhibit challenging flow properties which makes processing with automated presses difficult.Granulating these powders substantially improves flow properties and reduces the tendency for powder segregation during handling and pressing operations.The properties of Magnesium Oxide (MgO) that lead to good performance in thermal battery separators are n ...

    STTR Phase I 2017 Department of DefenseMissile Defense Agency
  10. Manufacturing Efficiency and Capability:Improvement of Flow Properties of Thermal Battery Component Powders

    SBC: Material Flow Solutions, Inc.            Topic: MDA16T001

    The premise of this work is that the main barrier to optimizing battery performance lies in understanding the relationship between bulk solids and particle flow properties and the flow into the die.Our hypothesis: an increase in quality battery production can be achieved if product preparation can be optimized and/or the die filling process controlled.Since die compression is mainly one-dimensiona ...

    STTR Phase I 2017 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government