You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. AC Plasma Sensor For High Enthalpy Hypersonic Test Facilities

    SBC: SPECTRAL ENERGIES LLC            Topic: AF17AT002

    Spectral Energies and the University of Notre Dame is developing a new class of point-wise sensors for high-enthalpy conditions that rely on the use of a weakly ionized AC discharge between two electrodes as the main sensing element. The advantages of this approach include a native high bandwidth with a theoretical maximum in excess of 15 MHz and a simple mechanical design that is inherently robus ...

    STTR Phase I 2017 Department of DefenseAir Force
  2. Adaptive and Smart Materials for Advanced Manufacturing Methods

    SBC: NEXTGEN AERONAUTICS, INC.            Topic: AF17AT018

    Additive manufacturing (AM) technologies covering a broad range of technologies and processes have been under continuous and accelerating development since the 80s. While there are still fundamental hurdles such as low production rates and small sizes, AM holds tremendous promise in terms of revolutionizing manufacturing. Recent trends include direct-printing and incorporating sensors and electr ...

    STTR Phase I 2017 Department of DefenseAir Force
  3. Adaptive Integrated Multi-Modal Sensing Array

    SBC: POLARIS SENSOR TECHNOLOGIES INC            Topic: AF08BT02

    Nanoscale infrared detectors are emerging as a potentially powerful alternative to traditional infrared detector technologies. The University of New Mexico has developed dots in a double well (DDWELL) quantum dot infrared photodetectors which have a spectral responsivity that can be tuned by controlling the bias voltage applied. In this Phase II effort, Polaris Sensor and UNM would fabricate a g ...

    STTR Phase II 2010 Department of DefenseAir Force
  4. Adaptive Markov Inference Game Optimization (AMIGO) for Rapid Discovery of Evasive Satellite Behaviors

    SBC: INTELLIGENT FUSION TECHNOLOGY, INC.            Topic: AF17CT02

    Space superiority requires space protection and space situational awareness (SSA), which rely on rapid and accurate space object behavioral and operational intent discovery. The focus of this project is to develop a stochastic approach for rapid discovery of evasive satellite behaviors. Designing the innovative decision support tool has numerous challenges: (i) partial observable actions; (ii) eva ...

    STTR Phase I 2018 Department of DefenseAir Force
  5. Additive Manufacturing Plastic Materials with Improved Dielectric Breakdown Strength

    SBC: VOXTEL, INC.            Topic: AF15AT07

    In this Phase II program, Voxtel will design, manufacture, and benchmark-test additive-manufactured (AM) insulators capable of electrical stress greater than 25 kV/mm, for use in high-electric-field applications, such as high-power microwave (HPM) devices. These insulators will sustain vacuum of 10-7 Torr and withstand 20 psi of pressure. To achieve this goal, Voxtel will synthesize readily additi ...

    STTR Phase II 2017 Department of DefenseAir Force
  6. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: ARCTOS Technology Solutions, LLC            Topic: DLA18A001

    Universal Technology Corporation (UTC) has teamed with the University of Dayton Research Institute (UDRI), Stratonics, and Macy Consulting to demonstrate not only the transitionability into commercial systems, but also to develop the data analytics and monitoring and control requirements to extract the full value fromseveral sensors, including the Stratonics ThermaViz, acoustic and profilometry se ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  7. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: X-Wave Innovations, Inc.            Topic: DLA18A001

    Additive Manufacturing (AM) is a modern and increasingly popular manufacturing process for metallic components, but suffers from well known problems of inconsistent quality of the finished product. Process monitoring and feedback control are therefore crucial research areas with a goal of solving this problem. To address this concern, X-wave Innovations, Inc. (XII) and the University of Dayton Res ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  8. Advanced Computational Methods for Study of Electromagnetic Compatibility

    SBC: HYPERCOMP INC            Topic: AF09BT13

    The leakage of electromagnetic (EM) energy into air vehicles, and particularly into ordnance, poses a hazard that requires careful evaluation. Under current guidelines, such evaluations are primarily to be carried out through extensive testing of items under possible field conditions, a process that can be both time-consuming and costly. The scope of this STTR Phase I activity is to implement a h ...

    STTR Phase I 2010 Department of DefenseAir Force
  9. Advanced Computational Methods for Study of Electromagnetic Compatibility

    SBC: MATHEMATICAL SYSTEMS & SOLUTIONS, INC.            Topic: AF09BT13

    The present text proposes development of efficient, accurate and rapidly-convergent algorithms for the simulation of propagation and scattering of electromagnetic fields within and around structures that (i) Consist of complex combinations of penetrable materials as well as perfect and imperfect conductors, and, (ii) Possess complex geometrical characteristics, including open surfaces, metallic c ...

    STTR Phase I 2010 Department of DefenseAir Force
  10. Advanced Ferroelectric Polymers for High Energy Density Capacitors

    SBC: LYNNTECH INC.            Topic: AF09BT05

    To shrink the size and weight of pulsed power systems used by various military systems, the Air Force seeks to increase the energy density of their capacitors. Polymers/ceramics nanocomposites are promising materials for such capacitors. They combine the high dielectric constant of the ceramic and the high breakdown strength and processability of polymers. In collaboration with the University o ...

    STTR Phase I 2010 Department of DefenseAir Force
US Flag An Official Website of the United States Government