You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Complex Crystalloid Resuscitative Fluid

    SBC: GanD, Inc.            Topic: DHA172009

    The published data has demonstrated that the currently available resuscitation fluids have detrimental effects on trauma outcomes.By addressing these deficiencies it is expected that the outcomes will improve. The crystalloid based resuscitation fluid in development by GanD Inc. has been designed to address all of the shortcomings of the currently available solutions.The solution, GND-001, is a cr ...

    SBIR Phase I 2018 Department of DefenseDefense Health Agency
  2. Lightweight, Compact System for Generating Lactated Ringer's Solution

    SBC: TDA Research, Inc.            Topic: DHA172011

    Currently, deployed medics are required to transport, maintain and be resupplied with liquid-based medications and materials that are heavy, expensive to transport, perishable and may require refrigeration.Many medications and materials are or will be available in concentrated or dehydrated formularies that require sterile water for injection (SWFI) to rehydrate for immediate use, such as Lactated ...

    SBIR Phase I 2018 Department of DefenseDefense Health Agency
  3. Joint Articulation And Reduction Simulator (JAARS)

    SBC: Simetri, Inc.            Topic: DHA173002

    A joint can exit its socket when it is exposed to an unhealthy level of force or rotation, causing a large amount of pain and loss of functionality in the limb. Joint dislocation can easily be diagnosed by a physical examination: palpitation of the affected joint will usually cause pain and tenderness in the patient, and the dislocated head of the bone can be felt out of its usual position in the ...

    SBIR Phase I 2018 Department of DefenseDefense Health Agency
  4. Selective Aortic Arch Perfusion Technologies for Hemorrhage-induced Cardiac Arrest

    SBC: Hays, Inc.            Topic: DHP16009

    Thereis increased interest in endovascular hemorrhagecontrol using aortic balloon occlusion to improve outcomes in preventable battlefield death from non-compressibletorso hemorrhage(NCTH). Our technology, the SABOT, is the nextgeneration in such catheters,which adds the ability of both selectivevascular bed perfusion, bypassinginjured beds, and partial perfusion. In phaseI thefeasibility and proo ...

    SBIR Phase II 2018 Department of DefenseDefense Health Agency
  5. Rapid Sourcing for Critical ALRE Items

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: DLA172001

    Increased competition and improved lead times are desired by the Defense Logistics Agency (DLA) for Aircraft Launch and Recovery Equipment (ALRE) Critical Safety/Critical Application Items (CSI/CAI). Ten ALRE National Stock Number (NSN) items were identified with annual demand values over $10,000 with two or fewer approved sources.Mainstream Engineering has carefully reviewed the ten NSNs provided ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  6. Cost and Lead Time Reduction for Hard to Source Items

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: DLA172002

    Increased competition and improved lead times are desired by the Defense Logistics Agency (DLA) for Land and Maritime Hard to Source Items (HSIs). Three National Stock Number (NSN) / part number (PN) combinations were identified with annual demand values over $10,000 with fewer than two approved sources.Mainstream Engineering has carefully reviewed the NSN/PN combinations provided in the solicitat ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  7. Oxygen Production and Delivery on Demand

    SBC: Global Research and Development Inc.            Topic: DHA17B005

    This proposal is in response to the Defense Health Agency 2017 Phase I SBIR topic 17B-005.The approach is the use of a membrane oxygen pump using newly developed nano-thickness membranes with all the layers less than 1 micron total.Nanometer thickness membranes enable more oxygen output per surface area at temperatures of 300-600 C than current state-of-the -art 600-800 C membranes that are 50-300 ...

    STTR Phase I 2018 Department of DefenseDefense Health Agency
  8. Brain Targeting Nanoparticle for Drug Delivery in Traumatic Brain Injury

    SBC: Weinberg Medical Physics, Inc.            Topic: DHA18A001

    There is an urgent need to bypass or cross the blood brain barrier (BBB) to deliver drugs for TBI treatment. This project aims to develop targted intranasally delivered, magnetically propulsed, and targted nanoparticles for traumatic brain injury (TBI). In Phase I, we will demonstrate the design, fabrication, and in vitro characterization of proposed drug laden magnetic nanoparticles as well as co ...

    STTR Phase I 2018 Department of DefenseDefense Health Agency
  9. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: ARCTOS Technology Solutions, LLC            Topic: DLA18A001

    Universal Technology Corporation (UTC) has teamed with the University of Dayton Research Institute (UDRI), Stratonics, and Macy Consulting to demonstrate not only the transitionability into commercial systems, but also to develop the data analytics and monitoring and control requirements to extract the full value fromseveral sensors, including the Stratonics ThermaViz, acoustic and profilometry se ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  10. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: X-Wave Innovations, Inc.            Topic: DLA18A001

    Additive Manufacturing (AM) is a modern and increasingly popular manufacturing process for metallic components, but suffers from well known problems of inconsistent quality of the finished product. Process monitoring and feedback control are therefore crucial research areas with a goal of solving this problem. To address this concern, X-wave Innovations, Inc. (XII) and the University of Dayton Res ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
US Flag An Official Website of the United States Government