You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Fuel Efficient Nanofluid Gear Oil

    SBC: Pixelligent Technologies, LLC            Topic: A15AT018

    Improving vehicle fuel efficiency for the military can significantly reduce costs and reduce risk to solider safety. One way to improve vehicle efficiency for new and legacy vehicles is to reduce frictional loses in the drivetrain through use of lower viscosity lubricants. However, this comes with the risk of reducing durability of drivetrain components through increased wear, pitting and scuffing ...

    STTR Phase II 2018 Department of DefenseArmy
  2. Innovative Mitigation of Radiation Effects in Advanced Technology Nodes

    SBC: MICROELECTRONICS RESEARCH DEVELOPMENT CORPORATION            Topic: DTRA16A003

    Micro-RDC has developed portable radiation effects test structures that scale to new process nodes.These structures will enable the investigation of the effects of radiation on the new technology from the material processing level as well as the circuit level.Fabricating the chosen structures and the refinement of software to extract the model parameters will be completed in this effort.A suite of ...

    STTR Phase II 2018 Department of DefenseDefense Threat Reduction Agency
  3. Proactive Risk Monitoring Using Predictive Analytics

    SBC: ARCTOS Technology Solutions, LLC            Topic: MDA16T002

    Presently the missile defense systems are using a reactive and program-centric framework for assessing industrial base risk. The Phase I effort focused on developing a wide and deep network algorithm using Industrial Product-Support Vendor (IPV) Gen II program for predicting the probability of failure. The proposed Phase II effort leverages the Phase I work and will focus on three main goals:(1) I ...

    STTR Phase II 2018 Department of DefenseMissile Defense Agency
  4. Deep Machine learning for risk Analysis and Prediction (D-MAP) in supply chains

    SBC: Intelligent Automation, Inc.            Topic: MDA16T002

    Globalization and digitization have been driving the recent economic growth at the expense of raising the risk level in the supply chain related to fraud, security, and safety, while current practice of supply chain management and risk assessment is lagging far behind. Therefore, commercial industries and government agencies are seeking advanced supply chain risk assessment solutions, which can ef ...

    STTR Phase II 2018 Department of DefenseMissile Defense Agency
  5. Novel Separator Materials for Achieving High Energy/Power Density, Safe, Long-Lasting Lithium-ion Batteries for Navy Aircraft Applications

    SBC: ADA Technologies, Inc.            Topic: N16AT008

    To meet Navy needs for high performance and safe lithium ion (Li-ion) batteries for naval aircraft, ADA Technologies Inc. (ADA) and its university collaborator propose to optimize and transfer a highly tunable, high performance and safe, block copolymer derived nanoporous separator. The innovative strategy provides a powerful tool to allow exquisite tuning of performance and safety features of the ...

    STTR Phase II 2018 Department of DefenseNavy
  6. Fully Encapsulating Dielectrics for Gaseous Helium Cooled Superconducting Power Cables

    SBC: Advanced Conductor Technologies LLC            Topic: N16AT011

    The proposed program will develop dielectrics for dc superconducting power transmission cables that are cooled with cryogenic helium gas. The Dielectrics will be sealed again helium gas penetration and allow for an operating voltage of 12 kV in a pressure of 2 MPa at 50 K. The dielectrics will be designed for use with all helium facing components of power transmission systems based on CORC cables. ...

    STTR Phase II 2018 Department of DefenseNavy
  7. Wide-Area Laser Additive Manufacturing in Metals with Adaptive Beam Shaping (WALAM-ABS)

    SBC: MV Innovative Technologies LLC (DBA: Opt            Topic: N17AT030

    Optonicus proposes development of the Wide-Area Laser Additive Manufacturing in Metals with Adaptive Beam Shaping (WALAM-ABS) laser additive manufacturing (LAM) system. The WALAM-ABS metal additive manufacturing system will solve long-standing drawbacks imposed by current single-point selective laser melting LAM technology through the use of wide-area processing based on proprietary multi-beam fib ...

    STTR Phase II 2018 Department of DefenseNavy
  8. Small Team Command, Control, Communications and Situational Awareness (C3SA), SOCOM08-001

    SBC: CEEBUS TECHNOLOGIES, LLC            Topic: SOCOM08001

    SOF combat swimmers have a need for the continuous monitoring of each others relative position while diving and for the capability of being able to communicate with each other to help establish a common operational picture (COP).The C3SA system was previously developed under SBIR Topic SOCOM08-001 thru the receipt of both Phase I and Phase II SBIR awards.The C3SA established a stand-alone network ...

    STTR Phase II 2018 Department of DefenseSpecial Operations Command
  9. Robust-Mode Analysis, Reduced-Order Modeling, and Intelligent Control Strategies for Reacting and Non-Reacting Flows

    SBC: Spectral Energies, LLC            Topic: AF12BT15

    This Phase-II STTR research effort is designed to forward the engineering investigation of the dynamics and control of turbulent combustion in high-pressure combustion systems by developing a set of game-changing nonlinear analysis tools that can significantly improve the post-processing speed and intelligent data mining of large numerical or experimental data sets. Moreover, a system based on non ...

    STTR Phase II 2018 Department of DefenseAir Force
  10. Meso-scale Framework for Simulating the Response of Structural Reactive Materials to Shock Loading

    SBC: STREAMLINE NUMERICS, INC.            Topic: AF16AT23

    Structural reactive materials (SRMs) or multifunctional energetic materials offer the ability to combine the high energy release rates of traditional high explosives with structural strength.When successfully formulated they can lead to light-weight, high-performance and hitherto inaccessible designs of munitions. The key feature of structural energetic materials (SEMs), perhaps even more so than ...

    STTR Phase II 2018 Department of DefenseAir Force
US Flag An Official Website of the United States Government