Award Data

Improving vehicle fuel efficiency for the military can significantly reduce costs and reduce risk to solider safety. One way to improve vehicle efficiency for new and legacy vehicles is to reduce frictional loses in the drivetrain through use of lower viscosity lubricants. However, this comes with the risk of reducing durability of drivetrain components through increased wear, pitting and scuffing ...

This proposal is in response to the Defense Health Agency 2017 Phase I SBIR topic 17B-005.The approach is the use of a membrane oxygen pump using newly developed nano-thickness membranes with all the layers less than 1 micron total.Nanometer thickness membranes enable more oxygen output per surface area at temperatures of 300-600 C than current state-of-the -art 600-800 C membranes that are 50-300 ...

Micro-RDC has developed portable radiation effects test structures that scale to new process nodes.These structures will enable the investigation of the effects of radiation on the new technology from the material processing level as well as the circuit level.Fabricating the chosen structures and the refinement of software to extract the model parameters will be completed in this effort.A suite of ...

Scalable, inexpensive manufacturing processes that produce yarns capable of storing energy are required for new breakthroughs within the wearable electronics sector. To enable to further improve the properties of yarn-based electrochemical performance in energy-storage systems, fiber-based yarns are proposed and developed via a scalable and cost effective wet spinning manufacturing process, and la ...

The strain engineering effort will constitute development of a synthetic biology toolkit applicable for food waste conversion in clostridium. The engineered strain will enable high efficiency conversion of army food waste to fuel. The proposed project will scale up a clostridium based fermentation method to produce fuel from food waste. A batch reactor will be optimized. Overall techno-economic fe ...

TransWave Photonics, LLC proposes to develop mid-wave infrared photonic integrated circuits based on monolithic integration of passive low-loss waveguides, thermo-optically tunable photonic elements, and quantum cascade gain sections within the same InGaAs/AlInAs/InP platform. The proposed approach will enable power combining and 2-dimensinoal beam steering of the outputs from multiple high-power ...

ADA Technologies, Inc. proposes to transition our previously developed BB-2590 Hybrid Electrical Energy Storage System (HEESS) architecture into a Conformable Wearable Battery format, or CWB-HEESS (Figure 1). We seek to satisfy a meaningful, Army Program Executive Office (PEO) Soldier need for a rechargeable, safe and high energy CWB. We anticipate the CWB-HEESS will have broad U.S. Dept. of Defen ...

Over the last decade the amount of data available from the internet, sensors and other sources has grown dramatically providing the opportunity to gain novel insights in many fields. Uncovering non-linear low dimensional structure in high-dimensional data (i.e., manifold learning), a key to summarization, remains a challenging problem which ultimately inhibits knowledge discovery. Intelligent Auto ...

For Robotic/Autonomous Systems (RAS) to be truly effective in the battlefield, they need to be integrated with intelligent decision-making capabilities. In particular, the following capabilities will help them dealing with the challenging real-world problems of off-road navigation: 1) Accurate terrain traversability assessment; 2) Optimal trajectory computation; and 3) Effective maneuver selection ...

We will develop a lab-on-chip optical absorption spectrometer spanning 3-15micron molecular fingerprint region, in a single epitaxially grown heterostructure that monolithically integrates thermally tuned distributed feedback quantum cascade laser (QCL) and quantum cascade detector (QCD) arrays with slotted photonic crystal waveguides (SPCWs) in a mid-infrared InGaAs passive photonic waveguide. In ...