You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Thin Film Deposition of Highly Conductive Metals for Sensor Applications- Phase II

    SBC: Summit Information Solutions, Inc.            Topic: A17AT001

    Deposition of highly conductive, continuous thin film metals has proven to be a significant challenge. There are several techniques that allow deposition of these metals, but their application is limited to planar surfaces and only offer complete line of sight deposition. During a recent Phase I STTR project, Summit Information Solutions, Inc. (Summit), in partnership with University of Alabama in ...

    STTR Phase II 2019 Department of DefenseArmy
  2. Passive Millimeter-Wave Imaging Camera System Using Optical Up-Conversion in Sparse Array Configuration

    SBC: Novaa Ltd            Topic: A18BT017

    The objective of this proposal is to enable high-sensitivity, passive imaging system of natural mm-wave emissions, which can be used as standalone or fused with other imaging modality such as conventional IR imagery in degraded environments. This is achieved through a unique antenna integrated electro-optic (EO) modulator, where received mm-wave signals modulate an optical carrier. The optical car ...

    STTR Phase I 2019 Department of DefenseArmy
  3. Rapid Prototyped 3D Printed Filters for CW Agent Protection

    SBC: TDA Research, Inc.            Topic: A18BT018

    Defense against chemical weapons is a critical DoD requirement. An effective defense requires the development of unique respirator systems that prevent inhalation of chemical warfare (CW) agents. In addition, the protective equipment exposed to CW agents must not pose a residual hazard after use in the battlefield. Existing respirator canisters remove CW agents, but they do not self-decontaminate ...

    STTR Phase I 2019 Department of DefenseArmy
  4. Printable Radar Absorbent Materials/Structures for Soldier Uniforms & Other Army Textiles

    SBC: Luna Innovations Incorporated            Topic: A18BT023

    Portable Advanced Battlefield and Ground surveillance radar can now provide effective detection of small targets, posing challenges for troop movement and stealth missions. Radar absorbent strategies have been achieved in composites and larger textile objects, but effective light-weight solutions for current operational clothing and individual equipment systems such as uniforms, knapsacks and body ...

    STTR Phase I 2019 Department of DefenseArmy
  5. W-Band RF Instrumentation

    SBC: Srico Inc            Topic: A18BT002

    W-band millimeter waves have a number of important applications, including directed energy and, more recently, 5G FR2 network development. Reliable measurements of electric fields in the W-Band, while critical to the development of these applications, have proven challenging. This proposal addresses the development of an accurate, traceable, cost effective W-band RF field strength detector. The so ...

    STTR Phase I 2019 Department of DefenseArmy
  6. Metal Additive Manufacturing with Minimal Post Processing (MaMMPP) (18-RD-116)

    SBC: UES, Inc.            Topic: A18BT003

    Metal Additive Manufacturing (AM) research has typically addressed understanding how to maximize performance for an AM material, taking into account microstructural anisotropy, residual stress, defects (such as pores and lack of fusion defects), and surface finish. Optimizing a part then requires significant post processing such as hot isostatic pressing (HIP), heat treatment and surface finishing ...

    STTR Phase I 2019 Department of DefenseArmy
  7. Design of Easy-To-Use Structural Alloy Feedstocks for Additive Manufacturing

    SBC: Elementum 3D, Inc.            Topic: A18BT003

    There is a need for easy-to-use, versatile alloys for additive manufacturing that print consistently regardless of the specific process or machine, or the metallurgical and manufacturing knowledge of the user. Such capability is especially critical for soldiers to be able to make every day items on demand in the theater of war. Toward meeting this need, recent successes developing high performance ...

    STTR Phase I 2019 Department of DefenseArmy
  8. Membraneless Water Purification via Continuous, Self-Contained, Vacuum-Assisted Diffusiophoresis

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: A18BT005

    We propose the development of a membraneless water purification system using continuous, self-contained, vacuum-assisted diffusiophoresis. Using diffusiophoresis allows the system to clean water contaminated with particulates and bacteria without membranes or filters, while producing a stream of fresh, drinkable water. The system will operate using only electricity supplied by portable batteries/s ...

    STTR Phase I 2019 Department of DefenseArmy
  9. Runnable Environment for Team Effectiveness and Assessment Metrics (re-TEAM)

    SBC: Modus Operandi, Inc.            Topic: A18BT008

    The most critical component of any modern enterprise is effective use of its human resources. The rise of productivity-boosting applications and wearable sensors has provided individual users with data-driven insights into their own effectiveness. Despite these advancements there has not been a corresponding rise in tools for evaluating and improving the effectiveness of teams as a whole. New wear ...

    STTR Phase I 2019 Department of DefenseArmy
  10. Quantum Utilities for Integrated Characterization

    SBC: Quantum Benchmark Inc            Topic: A18BT011

    Quantum information processing has the potential to revolutionize the U.S. economy, with a potential market value of hundreds of billions of dollars for quantum-information based technologies in a wide variety of sectors, including pharmaceuticals, energy, transportation, and cyber security. A major obstacle to realizing this potential is overcoming the error-prone nature of quantum information, w ...

    STTR Phase I 2019 Department of DefenseArmy
US Flag An Official Website of the United States Government