You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Metal Digital Direct Manufacturing (MDDM) for Close-Out of Combustion Chambers and Nozzle Fabrications

    SBC: Keystone Synergistic Enterprises, LLC            Topic: T12

    This NASA sponsored STTR project will investigate methods for close-out of large, liquid rocket engine, nickel or stainless steel nozzle, coolant channels utilizing robotic laser and pulsed-arc additive manufacturing (AM)methods. Structural jacket to coolant channel land area interface strength will be quantified and metallurgical characterization completed.Process optimizations will be conducted ...

    STTR Phase II 2019 National Aeronautics and Space Administration
  2. Highly Sensitive Flash LADAR Camera

    SBC: VOXTEL, INC.            Topic: T9

    To address the urgent need for 3D flash-lidar technology for landing on solar system bodies and for spacecraft rendezvous and docking with satellites, an effort is proposed to fabricate, characterize, and test a versatile, high-sensitivity InGaAs APD 3D flash lidar and to advance the technology-readiness level (TRL) of lidar technologies suitable for NASA mission requirements. Leveraging an existi ...

    STTR Phase II 2019 National Aeronautics and Space Administration
  3. Hydrogen-Based Energy Conservation System

    SBC: SKYRE, INC            Topic: T10

    The key objective of the Phase II Sequential project is to develop and demonstrate a fully-autonomous,nbsp;large-scale hydrogen recovery and compression system that can be used as a modular building block to reclaim and compress a substantial portion of SSCrsquo;s hydrogen. Specific goals for the Phase II Sequential program effort are:Improve in-cell and stack water management, along with flow dis ...

    STTR Phase II 2019 National Aeronautics and Space Administration
  4. High Density Hybrid Motors

    SBC: TERVES, LLC            Topic: T1

    This STTR program will mature high density, high regression rate hybrid rocket motor technology through TRL6 through the design, fabrication, and testing of third and fourth stage nanosatellite motors, while preparing designs and sizing for booster stages.nbsp; Hybrid Rockets offer substantially lower cost compared to storable and cryogenic bipropellant systems, but currently suffer from poor pack ...

    STTR Phase II 2019 National Aeronautics and Space Administration
  5. Vision-Based Navigation for Formation Flight onboard ISS

    SBC: JAYCON SYSTEMS LLC            Topic: T11

    The proposed Phase II supports completion of the RINGS science missions on ISS using SVGS as real-time sensor for the EMFF maneuver. During Phase I, SVGS-based navigation of RINGS was developed and tested on a 3DOF ground-based platform, and mechanical and electrical integration of RINGS with the free-flying robotic platforms on ISS (Astrobee) was designed in detail. SVGS was deployed and tested o ...

    STTR Phase II 2019 National Aeronautics and Space Administration
  6. Efficient cFS-based On-board Lamberts Solution for DSMs

    SBC: ADVANCED SPACE LLC            Topic: T11

    Distributed Spacecraft Missions (DSM) architectures provide unique scientific and programmatic benefits including multipoint in-situ measurements, multi-angle viewpoints, and improved understanding of the connections between separately measured phenomena and their time variations. However, these missions impose significant operational demands on ground tracking resources and mission operators alik ...

    STTR Phase II 2019 National Aeronautics and Space Administration
  7. Launch Weather Decision Support System

    SBC: Radiometrics Corporation            Topic: T1

    NASA wants a cost-effective atmospheric remote sensing system providing accurate temperature and humidity profiles to least 10 km height in clear and cloudy conditions. Radiometrics Microwave Profiler (MP) products currently provide accurate temperature and humidity profiles in good agreement with radiosondes to 3 km height. Good agreement can be extended beyond 10 km height using variational retr ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  8. Multiphase Modeling of Solid Rocket Motor Internal Environment

    SBC: CFD RESEARCH CORPORATION            Topic: T1

    Solid rocket motor (SRM) design requires detailed understanding of the slag accumulation process in order to: predict thrust continuity, optimize propellant conversion efficiency, predict coning effects from sloshing, and to assess potential orbital debris (slag) hazard. Current state-of-the-art models for SRM environment do not have the capability to simulate the accumulation and dynamics of slag ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  9. Transient Acoustic Environment Prediction Tool for Launch Vehicles in Motion During Early Lift-Off

    SBC: CFD RESEARCH CORPORATION            Topic: T1

    Launch vehicles experience extreme acoustic loads dominated by rocket plume interactions with ground structures during liftoff, which can produce damaging vibro-acoustic loads on the vehicle and payloads if not properly understood and mitigated against. Existing capabilities for modeling turbulent plume physics are too dissipative to accurately resolve the acoustic propagation and detailed vehicle ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  10. Next Generation Water Recovery for a Sustainable Closed Loop Living

    SBC: Faraday Technology, Inc.            Topic: T6

    Among numerous technological advances sought in order to facilitate human space travel, innovations are needed that supports the mass- and energy-efficient maintenance of closed air, water, and waste systems in spacecraft habitats that operate on planetary environments such as Mars and within microgravity. Waste-water treatment system on board the ISS is one such system that has lifetime/durabilit ...

    STTR Phase II 2018 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government