You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Functional Engineering of a Photosynthetic Desalination Pump Circuit

    SBC: Phytodetectors, Inc.            Topic: G

    Phytodetectors will design and engineer a synthetic biological pump circuit to increase the volume of water produced via photosynthetic desalination. This project builds off previous technology designed by Phytodetectors: a mangrove-inspired ultra-filter that allows plants to purify salt water as well as secrete water with properties comparable to bottled water. The partnership seeks to demonstrat ...

    STTR Phase I 2020 Department of EnergyARPA-E
  2. Protonic Ceramic Membranes with Unprecedented Electrochemical Efficiency

    SBC: FuelCell Energy, Inc.            Topic: 19c

    Wind and solar electricity are gaining traction in the marketplace, but the electricity available from these sources is out of synch with demand Protonic ceramic electrochemical cells (PCECs) operating at intermediate temperatures (400 - 650°C) have enormous potential for electricity storage and delivery by reversible operation between electrolysis and fuel cell modes and therefore stand to addre ...

    STTR Phase I 2020 Department of Energy
  3. A Novel Radium-Selective Separation Technique to Improve the Production of 225Ac for Cancer Immunotherapy

    SBC: RADTRAN LLC            Topic: 35b

    225Ac is valuable isotope for radioimmunotherapy treatment of cancers by means of targeted alpha therapy (TAT) However, the production capacity for it is currently insufficient to support the clinical- and commercial-scale demand for TAT drugs This proposal describes a process for facilitating production of 225Ac by providing source material in the form of the radium isotopes (primarily 228Ra) tha ...

    STTR Phase I 2020 Department of Energy
  4. Ultrafast THz Switches Using Perfectly Absorbing Metal Free Metasurfaces

    SBC: SK Infrared LLC            Topic: 16a

    Terahertz frequency ranges from 100GHz and 10THz, or wavelengths between 3mm and 30µm These waves can pass through a variety of dielectric and amorphous substances and has a wide range of applications Major types of terahertz technology systems available in the market include terahertz imaging and terahertz spectroscopy Recently, interest in terahertz communication technologies started to grow Th ...

    STTR Phase I 2020 Department of Energy
  5. High Performance Glass Scintillators for Nuclear Physics Experiments

    SBC: Scintilex, LLC            Topic: 34d

    Scintillator materials are used to detect, analyze, and track photons and neutral particles The large volume electromagnetic calorimeters for the Electron-Ion Collider (EIC) and those in all four halls at the Jefferson Lab are nuclear physics detectors requiring scintillator materials Crystals such as lead tungstate have been used in calorimeters, but their production is slow and expensive In comp ...

    STTR Phase I 2020 Department of Energy
  6. Acceleration of Commercial Low-Rank Matrix Solver via SLATE

    SBC: IERUS TECHNOLOGIES INC            Topic: 07a

    Performing accurate simulations of large- and multi-scale electromagnetics problems has far-reaching implications The same physics governs applications as diverse as rare earth content reduction in DC motor design; wireless propagation in dense urban environments and novel antenna design, both key issues in the pending 5G communications boom; electromagnetic sounding for subsurface exo-terrestrial ...

    STTR Phase I 2020 Department of Energy
  7. A Collaboration to Develop a Commercialization Path or a Photonic Memory Controller Module (P-MCM)

    SBC: PLC CONNECTIONS            Topic: 04a

    As computational density for high- performance computing and big-data services continues to scale, performance scalability of next generation computing systems is becoming increasingly constrained by limitations in memory access, power dissipation and chip packaging. The processor-memory communication bottleneck, a major challenge in current multicore processors due to limited pin-out and power bu ...

    STTR Phase II 2020 Department of Energy
  8. Highly Transparent Aerogel with Refractive Index < 1.01 for High Energy Particle Detection

    SBC: Scintilex, LLC            Topic: 31d

    Aerogel of high optical quality is needed for hadron identification in nuclear physics experiments in the momentum range 3 - 8 GeV/c, where other techniques are not effective. The large-volume aerogel Cherenkov detectors for the Electron-Ion Collider (EIC) and those in three halls at the Jefferson Lab require high-quality, hydrophobic aerogel material. This Phase I/II project addresses this need w ...

    STTR Phase II 2020 Department of Energy
  9. An Instrument Platform for Controlling Weld Microstructures to Minimize Stress Corrosion Cracking in Dry Storage Canister

    SBC: SPECTRAL ENERGIES LLC            Topic: 38b

    Stress corrosion cracking (SCC) is a potential safety concern for welded stainless-steel dry storage canisters (DSC) for spent nuclear fuel (SNF). The welding procedure introduces high tensile residual stresses and changes in material properties in the heat-affected zone (HAZ) in the DSC. This might promote pitting and SCC crack initiation and growth when exposed to an aggressive chemical environm ...

    STTR Phase I 2020 Department of Energy
  10. Corrugated Feedhorn Arrays by Additive Manufacturing

    SBC: Faraday Technology, Inc.            Topic: 35g

    The Department of Energy’s Office of Science seeks to reduce cost and improve high energy physics particle and radiation detector sensitivity and manufacturability via the flexibility and reproducibility of additive manufacturing to produce complex detector components. Cosmic microwave background measurements characterize the temperature and polarization anisotropies of the universe. A critical ...

    STTR Phase I 2020 Department of Energy
US Flag An Official Website of the United States Government