You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. High Performance Substrate Embedded Microgrids for High Efficiency, Flexible Organic Light Emitting Diodes

    SBC: Electroninks Incorporated            Topic: 09b

    Indium tin oxide (ITO) films are currently the most widely used transparent conductor in optoelectronic applications. However, ITO suffers from several major technological and economic limitations for large area applications such as inadequate performance, high cost, and brittleness. The primary objective of this Small Business Technology Transfer (STTR) Phase I/Phase II project is to develop the ...

    STTR Phase II 2019 Department of Energy
  2. Real-Time Distributed Quench Detection In High Temperature Superconductor Magnets

    SBC: Luna Innovations Incorporated            Topic: 20a

    Nuclear fusion has great potential for supplying global energy needs with a clean, abundant energy source. Advanced superconducting magnets will be used to contain the plasma at the center of the reactor. To operate these magnets, new sensors are needed to monitor the superconductors in real-time to detect the signs that the superconductor may quench (lose superconducting properties), so that corr ...

    STTR Phase II 2019 Department of Energy
  3. Oxygen Production and Delivery on Demand

    SBC: Global Research and Development Inc.            Topic: DHA17B005

    This Phase II proposal is in response to the Defense Health Agency 2017 SBIR topic 17B-005. The approach is an electrochemical membrane oxygen pump using newly developed nano-thickness membrane technology. The total membrane with all the layers is less

    STTR Phase II 2019 Department of DefenseDefense Health Agency
  4. Low-cost, Time-resolved Chemical Characterization of Atmospheric Aerosols

    SBC: Aerosol Devices Inc.            Topic: 23b

    The composition of atmospheric particulate matter (“aerosols”) strongly influences health and environmental impacts, but there exist few time-resolved, long-term records of particle-phase chemical composition due to lack of appropriate monitoring tools. Needed is an instrument that is robust, easy-to-operate, with automated calibrations and data reduction, to provide operationally-inexpensive ...

    STTR Phase II 2019 Department of Energy
  5. A Multi-channel Radiation-tolerant, Low-power, High-speed, and Resolution Analog-to-Digital Converter for Nuclear Physics Detectors

    SBC: TallannQuest LLC            Topic: 28b

    Cost-effective and power-efficient radiation tolerant semiconductors are needed in various harsh environments, such as particle detectors, communication satellites, high-altitude avionics and medical imagining equipment. These include amplifiers, voltage regulators, analog-to-digital converters (ADCs) and digital logic circuitry. However, radiation-tolerant high-speed ADCs currently cost more than ...

    STTR Phase II 2019 Department of Energy
  6. Permanent Magnet (PM) Induction Heater for Paraffin Abatement

    SBC: AUSTIN GEOTECH SERVICES INC            Topic: 20b

    There are an estimated 1.7 million oil and gas wells in the United States, 771,000 of these are considered marginal producers. Combined they make up 11.3% of the US oil production and 8.3% of the US gas production. In that last 10 years, over 131,000 of these oil wells and 48,000 gas wells have been plugged and abandoned. Most of these wells suffer from paraffin plugging problems. The only way to ...

    STTR Phase II 2019 Department of Energy
  7. High-Speed Platform for Highly Parallel STM lithography and Hierarchical Assembly

    SBC: Zyvex Labs LLC            Topic: 17e

    Nanotechnology has failed to live up to its promise of exploiting the emerging properties at the nanoscale because of the lack of manufacturing precision thus denying society many energy saving materials and applications. There is therefore a strong need to realize the promise of complex nanosystems by developing atomically precise manufacturing (APM). This project targets a key component of an At ...

    STTR Phase II 2019 Department of Energy
  8. Developing Software for Pharmacodynamics and Bioassay Studies

    SBC: TConneX Inc.            Topic: DHP16C001

    Thegoal is to develop asoftwaretool that implementsa novelapproach applicableto fitgeneral pharmacologic, toxicology, or other biomedical data, that mayexhibita non-monotonic dose-responserelationship for which thecurrent parametricmodels fail. Thesoftwareexplores dose-responserelationships using both monotonicand non-monotonicmodels,and estimates theassociated doseresponsecurves,which can further ...

    STTR Phase II 2019 Department of DefenseDefense Health Agency
  9. Low-temperature chemical looping reforming catalysts for small-footprint GTL

    SBC: Catalytic and Redox Solutions, LLC            Topic: 22a

    Methane from U.S. shale deposits has significantly increased the usable amount of this domestic energy resource. Meanwhile, flaring of natural gas, which is commonly practiced in shale-oil production, exceeded 6 billion cubic meters in the United State annually. This leads to a waste of valuable energy resources and significant emissions of greenhouse gas. As such, small-footprint technologies tha ...

    STTR Phase I 2019 Department of Energy
  10. New Crystalline Silicon Module Architecture to Reduce Costs withImproved Manufacturability andDurability

    SBC: Creative Light Source, Inc            Topic: 16a

    Direct Solar in partnership with Colorado State University's Next Generation PV Center (NGPV) and H. B. Fuller Company will develop a new solar module architecture and manufacturing process optimized for crystalline silicon (c-Si) modules that significantly reduces manufacturing costs and improves reliability. The outcome of this program will be a new c-Si module design, streamlined manufacturing ...

    STTR Phase I 2019 Department of Energy
US Flag An Official Website of the United States Government