You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Multiferroic Materials for RF Applications

    SBC: Winchester Technologies, LLC            Topic: ST13B003

    Built upon the progress in Phase I period, Winchester Technologies, LLC is pleased to propose to investigate practical magnetoelectric antennas during the Phase II period based on solidly mounted resonators (SMR), which will have enormous impacts on DoD and civilian antenna applications. State of the art antennas suffer from three major open challenges: (1) large antenna size > ?0/10, (2) antenna ...

    STTR Phase II 2019 Department of DefenseArmy
  2. Scalable Biological Agent Detection Network

    SBC: Physical Sciences Inc.            Topic: A17AT020

    Physical Sciences Inc., in cooperation with University of Notre Dame, will develop a method for the persistent detection of aerosolized biological warfare agents using a distributed and cooperative sensor network within a Bayesian framework. The proposed system, named BioNet, will provide a wider coverage and two-fold reduction in false alarm rate over individual sensor performance through intelli ...

    STTR Phase II 2019 Department of DefenseArmy
  3. Compressive Spectral Video in the LWIR

    SBC: Physical Sciences Inc.            Topic: A13AT015

    Physical Sciences, Inc. and Colorado State University will advance the technical maturity of the Compressive Sensing Hyperspectral Imager (CS-HSI) platform. The CS-HSI operates in the longwave infrared (LWIR) spectral range with a single-pixel architecture for low-cost, standoff wide area Early Warning of chemical vapor plumes. The motivation for applying CS to LWIR HSI is to eliminate the high-co ...

    STTR Phase II 2019 Department of DefenseArmy
  4. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: ARCTOS Technology Solutions, LLC            Topic: DLA18A001

    This Phase II project aims to assemble the key set of sensor modalities that are needed to reliably view the key process anomalies and properties of laser powder bed fusion. The research team will down-select from the Phase I sensors investigated and integrate the sensors into a sensor fusion software package that facilitates data collection and synchronization, and eventually feedback control of ...

    STTR Phase II 2019 Department of DefenseDefense Logistics Agency
  5. Metrology of Thin Films on Sapphire Substrate

    SBC: Optowares Incorporated            Topic: DMEA16B001

    There is a lack of a non-destructive metrology tool to measure the thickness of thin films on sapphire substrates due to the transparency of the substrate. Leveraging our extensive experience building sensor systems combined with MIT Lincoln Laboratory’s expertise in theoretical modeling, we will design and build an innovative thin film measurement tool using Raman spectroscopy. Our metrology sy ...

    STTR Phase II 2019 Department of DefenseDefense Microelectronics Activity
  6. Pulse Voltammetry Tools for Accurate and Rapid Analysis of Batteries

    SBC: CFD Research Corporation            Topic: A152092

    Pulse voltammetry techniques, coupled with model-based analysis tools, provide a number of advantages for quantitative analysis of electrochemically active materials that govern the performance of batteries and fuel cells. In prior Phase I and II research, CFD Research developed and validated computational models in software that reads voltammogram data from laboratory instruments; predicts the re ...

    STTR Phase II 2019 Department of DefenseArmy
  7. No Power Bionic Lower Extremity Prostheses

    SBC: Liberating Technologies, Inc.            Topic: DHP16C007

    Current prosthetic feet produce much less peak mechanical power than the able-bodied foot/ankle and release only about half of the mechanical energy generated during gait. This leads to higher energy expenditure among amputees as compared to able-bodied i

    STTR Phase II 2019 Department of DefenseDefense Health Agency
  8. Oxygen Production and Delivery on Demand

    SBC: Global Research and Development Inc.            Topic: DHA17B005

    This Phase II proposal is in response to the Defense Health Agency 2017 SBIR topic 17B-005. The approach is an electrochemical membrane oxygen pump using newly developed nano-thickness membrane technology. The total membrane with all the layers is less

    STTR Phase II 2019 Department of DefenseDefense Health Agency
  9. AeroQUEST II: Aeromedical Quantified Understanding via Experimental Standards Toolkit

    SBC: Aptima, Inc.            Topic: DHA17C001

    Adverse physiological events (PEs) have plagued warfighters piloting military aircraft, particularly incidents involving hypoxia and cockpit cabin decompression. Although a variety of research has been performed to try to understand the problems and root

    STTR Phase II 2019 Department of DefenseDefense Health Agency
  10. Improve pyrotechnic smoke formulations that produce low flame

    SBC: Polaris Sensor Technologies, Inc.            Topic: A11aT026

    The objective of this research is to develop materials that replace the current generation of visible smoke formulations used by the U.S. military. In particular the materials must produce low or no flame so that they don't present a fire hazard, have relatively low toxicity, and are efficient. The efficiency is defined in a figure of merit that combines fill factor, yield factor, extinctio ...

    STTR Phase II 2013 Department of DefenseArmy
US Flag An Official Website of the United States Government