You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Smart Baseplate for Additive Manufacturing

    SBC: LUNA INNOVATIONS INCORPORATED            Topic: DLA18A001

    Additive manufacturing (AM) has rapidly evolved into a valuable technique for making parts which, at times, cannot be fabricated through conventional machining methods, or for fabrication of small quantities of complex parts. One challenge in the area of AM is the lack of real-time feedback on the fabrication process and the quality of the part being made. This is especially critical given the rel ...

    STTR Phase II 2019 Department of DefenseDefense Logistics Agency
  2. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: ARCTOS Technology Solutions, LLC            Topic: DLA18A001

    This Phase II project aims to assemble the key set of sensor modalities that are needed to reliably view the key process anomalies and properties of laser powder bed fusion. The research team will down-select from the Phase I sensors investigated and integrate the sensors into a sensor fusion software package that facilitates data collection and synchronization, and eventually feedback control of ...

    STTR Phase II 2019 Department of DefenseDefense Logistics Agency
  3. Scalable Manufacturing of Functional Yarns for Textile Energy Storage

    SBC: STORAGENERGY TECHNOLOGIES INC            Topic: A17AT013

    To further accelerate the commercialization process of our supercapactior yarns, we plan to further lower the production cost, enhance our yearn performance and optimize customer experience via materials and process engineering and innovative platform development. The major deliverable of this sequential Phase II project is to demonstrate the throughput capacity of a large area supercapactior fabr ...

    STTR Phase II 2019 Department of DefenseArmy
  4. Printable Radar Absorbent Materials/Structures for Soldier Uniforms & Other Army Textiles

    SBC: LUNA INNOVATIONS INCORPORATED            Topic: A18BT023

    Portable Advanced Battlefield and Ground surveillance radar can now provide effective detection of small targets, posing challenges for troop movement and stealth missions. Radar absorbent strategies have been achieved in composites and larger textile objects, but effective light-weight solutions for current operational clothing and individual equipment systems such as uniforms, knapsacks and body ...

    STTR Phase I 2019 Department of DefenseArmy
  5. Rapid Prototyped 3D Printed Filters for CW Agent Protection

    SBC: TDA RESEARCH, INC.            Topic: A18BT018

    Defense against chemical weapons is a critical DoD requirement. An effective defense requires the development of unique respirator systems that prevent inhalation of chemical warfare (CW) agents. In addition, the protective equipment exposed to CW agents must not pose a residual hazard after use in the battlefield. Existing respirator canisters remove CW agents, but they do not self-decontaminate ...

    STTR Phase I 2019 Department of DefenseArmy
  6. Passive Millimeter-Wave Imaging Camera System Using Optical Up-Conversion in Sparse Array Configuration

    SBC: NOVAA LTD            Topic: A18BT017

    The objective of this proposal is to enable high-sensitivity, passive imaging system of natural mm-wave emissions, which can be used as standalone or fused with other imaging modality such as conventional IR imagery in degraded environments. This is achieved through a unique antenna integrated electro-optic (EO) modulator, where received mm-wave signals modulate an optical carrier. The optical car ...

    STTR Phase I 2019 Department of DefenseArmy
  7. RODEO: Roll-Over Detection for Equipment-transporter Operation

    SBC: Intelligent Automation, Inc.            Topic: A18BT025

    To gain tactical advantages over adversaries in dismounted operations, infantrymen are often required to carry heavy loads on themselves. However, enduring a long distance walk while carrying a heavy march load is notorious for quickly exhausting the Solider, which consequently impedes the OPTEMPO of the troop. Addressing this problem, the Army is seeking a robust unmanned ground vehicle that can ...

    STTR Phase I 2019 Department of DefenseArmy
  8. W-Band RF Instrumentation

    SBC: SRICO INC            Topic: A18BT002

    W-band millimeter waves have a number of important applications, including directed energy and, more recently, 5G FR2 network development. Reliable measurements of electric fields in the W-Band, while critical to the development of these applications, have proven challenging. This proposal addresses the development of an accurate, traceable, cost effective W-band RF field strength detector. The so ...

    STTR Phase I 2019 Department of DefenseArmy
  9. Additive Manufactured Smart Structures with Discrete Embedded Sensors

    SBC: 3DFlexible Inc            Topic: A17AT024

    Recent advances in 3D structure printing and 3D direct printed electronics have widened the scope of possibilities for the Internet of Things (IoT). New near room temperature 3D direct ink writing (DIW) additive manufacturing (AM) printing processes allow many different type of sensors and they can be embedded anywhere in a structure, which offers several benefits. 1. Protection: sensors face degr ...

    STTR Phase II 2019 Department of DefenseArmy
  10. Malaria SHIELD™ Delivery System: Long-Term Malarial Chemoprophylactic Drug Releasing Implant

    SBC: LUNA INNOVATIONS INCORPORATED            Topic: A18BT022

    Malaria infection and transmission is a continual threat to military and civilian communities across the world, but there are very low compliance rates with current preventative treatments due to gastrointestinal effects of anti-malarial medications, forgetfulness, and a low perception of risk. In order to address the need for a long-acting malaria treatment that bypasses the issue of compliance, ...

    STTR Phase I 2019 Department of DefenseArmy
US Flag An Official Website of the United States Government