You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY22 is not expected to be complete until September, 2023.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Scalable Manufacturing of Functional Yarns for Textile Energy Storage

    SBC: Storagenergy Technologies, Inc.            Topic: A17AT013

    To further accelerate the commercialization process of our supercapactior yarns, we plan to further lower the production cost, enhance our yearn performance and optimize customer experience via materials and process engineering and innovative platform development. The major deliverable of this sequential Phase II project is to demonstrate the throughput capacity of a large area supercapactior fabr ...

    STTR Phase II 2019 Department of DefenseArmy
  2. Additive Manufactured Smart Structures with Discrete Embedded Sensors

    SBC: 3DFlexible Inc            Topic: A17AT024

    Recent advances in 3D structure printing and 3D direct printed electronics have widened the scope of possibilities for the Internet of Things (IoT). New near room temperature 3D direct ink writing (DIW) additive manufacturing (AM) printing processes allow many different type of sensors and they can be embedded anywhere in a structure, which offers several benefits. 1. Protection: sensors face degr ...

    STTR Phase II 2019 Department of DefenseArmy
  3. Developing Software for Pharmacodynamics and Bioassay Studies

    SBC: TConneX Inc.            Topic: DHP16C001

    Thegoal is to develop asoftwaretool that implementsa novelapproach applicableto fitgeneral pharmacologic, toxicology, or other biomedical data, that mayexhibita non-monotonic dose-responserelationship for which thecurrent parametricmodels fail. Thesoftwareexplores dose-responserelationships using both monotonicand non-monotonicmodels,and estimates theassociated doseresponsecurves,which can further ...

    STTR Phase II 2019 Department of DefenseDefense Health Agency
  4. Thin Film Deposition of Highly Conductive Metals for Sensor Applications- Phase II

    SBC: Summit Information Solutions, Inc.            Topic: A17AT001

    Deposition of highly conductive, continuous thin film metals has proven to be a significant challenge. There are several techniques that allow deposition of these metals, but their application is limited to planar surfaces and only offer complete line of sight deposition. During a recent Phase I STTR project, Summit Information Solutions, Inc. (Summit), in partnership with University of Alabama in ...

    STTR Phase II 2019 Department of DefenseArmy
  5. Printable Radar Absorbent Materials/Structures for Soldier Uniforms & Other Army Textiles

    SBC: Luna Innovations Incorporated            Topic: A18BT023

    Portable Advanced Battlefield and Ground surveillance radar can now provide effective detection of small targets, posing challenges for troop movement and stealth missions. Radar absorbent strategies have been achieved in composites and larger textile objects, but effective light-weight solutions for current operational clothing and individual equipment systems such as uniforms, knapsacks and body ...

    STTR Phase I 2019 Department of DefenseArmy
  6. Compact and Efficient Membraneless Water Purification

    SBC: LYNNTECH INC            Topic: A18BT005

    Local water production for troops using standard membrane filtration processes presents a significant logistics burden because of high energy consumption for removing particles based on size-exclusion methods and the constant need to replace fouled membranes. A membraneless filtration method using dissolved CO2 has been demonstrated to separate charged particles through the mechanism of diffusioph ...

    STTR Phase I 2019 Department of DefenseArmy
  7. Rapid Prototyped 3D Printed Filters for CW Agent Protection

    SBC: TDA Research, Inc.            Topic: A18BT018

    Defense against chemical weapons is a critical DoD requirement. An effective defense requires the development of unique respirator systems that prevent inhalation of chemical warfare (CW) agents. In addition, the protective equipment exposed to CW agents must not pose a residual hazard after use in the battlefield. Existing respirator canisters remove CW agents, but they do not self-decontaminate ...

    STTR Phase I 2019 Department of DefenseArmy
  8. Passive Millimeter-Wave Imaging Camera System Using Optical Up-Conversion in Sparse Array Configuration

    SBC: Novaa Ltd            Topic: A18BT017

    The objective of this proposal is to enable high-sensitivity, passive imaging system of natural mm-wave emissions, which can be used as standalone or fused with other imaging modality such as conventional IR imagery in degraded environments. This is achieved through a unique antenna integrated electro-optic (EO) modulator, where received mm-wave signals modulate an optical carrier. The optical car ...

    STTR Phase I 2019 Department of DefenseArmy
  9. RODEO: Roll-Over Detection for Equipment-transporter Operation

    SBC: Intelligent Automation, Inc.            Topic: A18BT025

    To gain tactical advantages over adversaries in dismounted operations, infantrymen are often required to carry heavy loads on themselves. However, enduring a long distance walk while carrying a heavy march load is notorious for quickly exhausting the Solider, which consequently impedes the OPTEMPO of the troop. Addressing this problem, the Army is seeking a robust unmanned ground vehicle that can ...

    STTR Phase I 2019 Department of DefenseArmy
  10. W-Band RF Instrumentation

    SBC: Srico Inc            Topic: A18BT002

    W-band millimeter waves have a number of important applications, including directed energy and, more recently, 5G FR2 network development. Reliable measurements of electric fields in the W-Band, while critical to the development of these applications, have proven challenging. This proposal addresses the development of an accurate, traceable, cost effective W-band RF field strength detector. The so ...

    STTR Phase I 2019 Department of DefenseArmy
US Flag An Official Website of the United States Government