You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Scalable Manufacturing of Functional Yarns for Textile Energy Storage

    SBC: STORAGENERGY TECHNOLOGIES INC            Topic: A17AT013

    To further accelerate the commercialization process of our supercapactior yarns, we plan to further lower the production cost, enhance our yearn performance and optimize customer experience via materials and process engineering and innovative platform development. The major deliverable of this sequential Phase II project is to demonstrate the throughput capacity of a large area supercapactior fabr ...

    STTR Phase II 2019 Department of DefenseArmy
  2. Passive Millimeter-Wave Imaging Camera System Using Optical Up-Conversion in Sparse Array Configuration

    SBC: NOVAA LTD            Topic: A18BT017

    The objective of this proposal is to enable high-sensitivity, passive imaging system of natural mm-wave emissions, which can be used as standalone or fused with other imaging modality such as conventional IR imagery in degraded environments. This is achieved through a unique antenna integrated electro-optic (EO) modulator, where received mm-wave signals modulate an optical carrier. The optical car ...

    STTR Phase I 2019 Department of DefenseArmy
  3. Rapid Prototyped 3D Printed Filters for CW Agent Protection

    SBC: TDA RESEARCH, INC.            Topic: A18BT018

    Defense against chemical weapons is a critical DoD requirement. An effective defense requires the development of unique respirator systems that prevent inhalation of chemical warfare (CW) agents. In addition, the protective equipment exposed to CW agents must not pose a residual hazard after use in the battlefield. Existing respirator canisters remove CW agents, but they do not self-decontaminate ...

    STTR Phase I 2019 Department of DefenseArmy
  4. Printable Radar Absorbent Materials/Structures for Soldier Uniforms & Other Army Textiles

    SBC: LUNA INNOVATIONS INCORPORATED            Topic: A18BT023

    Portable Advanced Battlefield and Ground surveillance radar can now provide effective detection of small targets, posing challenges for troop movement and stealth missions. Radar absorbent strategies have been achieved in composites and larger textile objects, but effective light-weight solutions for current operational clothing and individual equipment systems such as uniforms, knapsacks and body ...

    STTR Phase I 2019 Department of DefenseArmy
  5. RODEO: Roll-Over Detection for Equipment-transporter Operation

    SBC: Intelligent Automation, Inc.            Topic: A18BT025

    To gain tactical advantages over adversaries in dismounted operations, infantrymen are often required to carry heavy loads on themselves. However, enduring a long distance walk while carrying a heavy march load is notorious for quickly exhausting the Solider, which consequently impedes the OPTEMPO of the troop. Addressing this problem, the Army is seeking a robust unmanned ground vehicle that can ...

    STTR Phase I 2019 Department of DefenseArmy
  6. W-Band RF Instrumentation

    SBC: SRICO INC            Topic: A18BT002

    W-band millimeter waves have a number of important applications, including directed energy and, more recently, 5G FR2 network development. Reliable measurements of electric fields in the W-Band, while critical to the development of these applications, have proven challenging. This proposal addresses the development of an accurate, traceable, cost effective W-band RF field strength detector. The so ...

    STTR Phase I 2019 Department of DefenseArmy
  7. Metal Additive Manufacturing with Minimal Post Processing (MaMMPP) (18-RD-116)

    SBC: UES INC            Topic: A18BT003

    Metal Additive Manufacturing (AM) research has typically addressed understanding how to maximize performance for an AM material, taking into account microstructural anisotropy, residual stress, defects (such as pores and lack of fusion defects), and surface finish. Optimizing a part then requires significant post processing such as hot isostatic pressing (HIP), heat treatment and surface finishing ...

    STTR Phase I 2019 Department of DefenseArmy
  8. Design of Easy-To-Use Structural Alloy Feedstocks for Additive Manufacturing

    SBC: ELEMENTUM 3D, INC.            Topic: A18BT003

    There is a need for easy-to-use, versatile alloys for additive manufacturing that print consistently regardless of the specific process or machine, or the metallurgical and manufacturing knowledge of the user. Such capability is especially critical for soldiers to be able to make every day items on demand in the theater of war. Toward meeting this need, recent successes developing high performance ...

    STTR Phase I 2019 Department of DefenseArmy
  9. Compact and Efficient Membraneless Water Purification

    SBC: LYNNTECH INC.            Topic: A18BT005

    Local water production for troops using standard membrane filtration processes presents a significant logistics burden because of high energy consumption for removing particles based on size-exclusion methods and the constant need to replace fouled membranes. A membraneless filtration method using dissolved CO2 has been demonstrated to separate charged particles through the mechanism of diffusioph ...

    STTR Phase I 2019 Department of DefenseArmy
  10. Membraneless Water Purification via Continuous, Self-Contained, Vacuum-Assisted Diffusiophoresis

    SBC: MAINSTREAM ENGINEERING CORP            Topic: A18BT005

    We propose the development of a membraneless water purification system using continuous, self-contained, vacuum-assisted diffusiophoresis. Using diffusiophoresis allows the system to clean water contaminated with particulates and bacteria without membranes or filters, while producing a stream of fresh, drinkable water. The system will operate using only electricity supplied by portable batteries/s ...

    STTR Phase I 2019 Department of DefenseArmy
US Flag An Official Website of the United States Government