You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Recovery Act- Development of a Fiber Based Source of High Average Power Ultrafast Pulses at 2.0 Microns

    SBC: Kapteyn-Murnane Laboratories, Inc.            Topic: 04d

    Bright coherent light sources in the soft x-ray region of the spectrum are useful for a variety of applications of interest to DOE in the basic sciences, nanoscience and biology, and for technological applications. At Free-Electron Laser Facilities, peak power output of the x-ray pulses is enhanced by using a mid-infrared laser pulse instead of a near-infrared pulse. The current front end for mid- ...

    STTR Phase II 2010 Department of Energy
  2. Single Mode Hollow Core Waveguides for Long-Wave Infrared (LWIR) Lasers

    SBC: Opto-knowledge Systems, Inc.            Topic: 58b

    Spectroscopy in the long-wave infrared (LWIR) wavelength region (8 to 12

    STTR Phase II 2010 Department of Energy
  3. Advanced Spectroscopic Capabilities for 3-D Synchrotron X-Ray Microscopes

    SBC: Xradia            Topic: 09a

    Many important technology challenges today such as the capacity and life time of batteries require new characterization techniques to understand and improve performance. In the STTR Phase II project, novel x-ray microscope techniques and software are developed to be able to image samples in three dimensions and determine chemical composition and function on a microscopic level. As known from ubi ...

    STTR Phase II 2013 Department of Energy
  4. Resonant Enhanced Infrared Nano-Spectroscopy (REINS)

    SBC: Anasys Instruments Corp.            Topic: 14b

    Infrared spectroscopy is the most widely used technique for chemical characterization with a worldwide market of over $1B annually. Conventional infrared spectroscopy suffers, however, from fundamental spatial resolution limits that prohibit its application at the nanoscale. This has prevented widespread use of IR spectroscopy in the growing field of nanoscale materials. The atomic force microsc ...

    STTR Phase II 2013 Department of Energy
  5. Complete Muon Collider Cooling Channel Design and Simulations

    SBC: MUPLUS INC            Topic: 28b

    Considerable progress has been made in developing promising subsystems for muon beam cooling channels to provide the great reduction of emittances required for an Energy-Frontier Muon Collider; but an end-to-end design is lacking. Meanwhile, the recent discovery of a Higgs-like boson has created interest in the high-energy physics community for a Higgs Factory to investigate whether its propertie ...

    STTR Phase II 2013 Department of Energy
  6. Advance Additive Manufacturing Method for SRF Cavities of Various Geometries

    SBC: Radiabeam Technologies, LLC            Topic: 34a

    Current state-of-the-art SRF accelerating cavities require the use of many complex and expensive techniques throughout their fabrication/performance cycle. This project will utilize a novel Additive Manufacturing (AM) process to produce nearly monolithic SRF niobium cavities of arbitrary shape with features such as optimized wall thickness and/or integrated stiffeners, greatly reducing the cost a ...

    STTR Phase II 2013 Department of Energy
  7. Polymer Nanowire Sensor Array for Subsurface CO2 Monitoring

    SBC: Innosense Llc            Topic: 17c

    The DOEs & quot;Monitoring Verification and Accounting (MVA) program goal is to confirm permanent storage of CO2 in geologic formations by real-time monitoring should CO2 leak. Remote technologies, effective for atmospheric or above ground CO2 monitoring, are ineffective for subsurface, and it is where leakage can be detected first. By the time leaked CO2 slowly appears on the surface, CO2 may hav ...

    STTR Phase II 2013 Department of Energy
  8. REBCO Coated Conductor Cables for Fusion Magnets

    SBC: Advanced Conductor Technologies LLC            Topic: 22c

    The feasibility for fusion as a practical energy source needs to be enhanced significantly by removing some of the restrictions that low-temperature superconductors put on the fusion magnet systems. This can be done by using high-temperature superconductors, allowing for much larger temperature margins, a higher magnet performance and less mechanical degradation during operation. There are curren ...

    STTR Phase II 2013 Department of Energy
  9. Retrofittable and Transparent Super-Insulator for Single-Pane Windows

    SBC: NANOSD, INC.            Topic: DEFOA0001429

    NanoSD, Inc. with its partners will develop a transparent, nanostructured thermally insulating film that can be applied to existing single-pane windows to reduce heat loss. To produce the nanostructured film, the team will create hollow ceramic or polymer nanobubbles and consolidate them into a dense lattice structure using heat and compression. Because it is mostly air, the resulting nanobubble s ...

    STTR Phase II 2016 Department of EnergyARPA-E
  10. Direct Conversion of Carbon Dioxide to Methanol

    SBC: Innosense Llc            Topic: 13c

    Although carbon capture and storage (CCS) technology has received the most attention for its potential to reduce emissions, processes that convert CO2 into a useful product can provide a positive return on investment and not just be an unrecoverable cost. Compared to CCS technology, the potential revenue generated by the use of CO2-based product is likely to grow popular with time while reducing ...

    STTR Phase II 2010 Department of Energy
US Flag An Official Website of the United States Government