You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Laser Dithering Device for Handheld Liquid Particle Measurements

    SBC: METROLASER, INCORPORATED            Topic: DMEA182001

    We propose a hand-held device that would be capable of measuring particles as small as 20 nm in liquid batches from semiconductor fabrication. The proposed system will overcome the complexities of existing in-line and batch sampling techniques and thus would reduce the operating time and cost of the fabrication process. The device will be small and easily portable and will not come in direct cont ...

    SBIR Phase I 2019 Department of DefenseDefense Microelectronics Activity
  2. Handheld Liquid Particle Counter

    SBC: HAL Technology, LLC            Topic: DMEA182001

    The trend of microelectronic processing technology is for more advanced complex devices integrated in smaller size. Particles could become significantly more  prevalent as killer defects and have adverse effect on fabrication yield rate. Meanwhile, clean environment control requirements originally focused on particles in the air have been extended to encompass liquids that come into direct conta ...

    SBIR Phase I 2019 Department of DefenseDefense Microelectronics Activity
  3. Front End of Line and Back End of Line Layer Fabrication Partitioning for the Purpose of Design Intellectual Property (IP) Protection

    SBC: MAXENTRIC TECHNOLOGIES LLC            Topic: DMEA182002

    To meet the demands of the DMEA182-002 SBIR solicitation (“Front End of Line and Back End of Line Layer Fabrication Partitioning for the Purpose of Design Intellectual Property Protection”), the MaXentric and UCLA team proposes the HIGHFIVE (Heterogeneous Integration Guideline Highlighting Fabrication of Information Veiled Electronics), which provides a practical verification flow using the c ...

    SBIR Phase I 2019 Department of DefenseDefense Microelectronics Activity
  4. A Unified Blockchain for FPGA Firmware and Hardware

    SBC: COLVIN RUN NETWORKS, INC            Topic: DMEA182003

    FPGA units in security-sensitive applications need secure manufacturing & configuration methods to combat supply chain interdiction and compromise by adversaries, with robust Third-Party IP provenance traceability. The proposed solution uniquely meets this need with a State of the Art blockchain implementation to build a fit-for-purpose supply chain blockchain (SCBC) optimized for DMEA’s FPGA  ...

    SBIR Phase I 2019 Department of DefenseDefense Microelectronics Activity
  5. Automated In-situ Large-area De-processing of ICs with High Throughput

    SBC: MICRONET SOLUTIONS INC.            Topic: DMEA18B001

    The objective of this proposal is to demonstrate the feasibility of producing an automated delayering and imaging system with end point detection, material density detection with built in neural network error correction. This process, coined fast Automated Delayering-Image Capture System (ADICS) leverages off of the existing Pix2Net which is a proven automated imaging 3D microchip reconstruction ...

    STTR Phase I 2019 Department of DefenseDefense Microelectronics Activity
  6. High-brilliance Multi-Energy X-ray Source and Optics for Rapid IC Inspection

    SBC: SIGRAY, INC.            Topic: DMEA162001

    This Phase II SBIR proposal aims to develop an x-ray illumination beam system comprising a dual-target x-ray source and a set of magnifying Wolter x-ray optics for use in laboratory-based integrated circuit (IC) inspection x-ray microscopes. Due to the increasing reliance on electronics for military systems and devices, a method to quickly analyze ICs in 3D is critical. X-ray microscopy enabled by ...

    SBIR Phase II 2019 Department of DefenseDefense Microelectronics Activity
  7. Through-Lens Fiducial Marking System

    SBC: Checkpoint Technologies LLC            Topic: DMEA172002

    Awarded Phase I and having completed the Phase I concept and feasibility study of the innovative development of a tool, Thru-Lens Fiducial Marking, that can be integrated into an IR microscope that is able to create fiducial marks on the surface of the backside of silicon, we now propose to embark on Phase II, or implementation of said technology. The current state-of-art in semiconductor device ...

    SBIR Phase II 2019 Department of DefenseDefense Microelectronics Activity
  8. Stationary Wide-Angle Concentrator PV System

    SBC: GLINT PHOTONICS, INC.            Topic: MOSAIC

    Concentrator PV systems using highly efficient multijunction photovoltaic cells hold out the promise of very low-cost solar electricity generation, but their adoption has been hamstrung by the requirement for bulky mechanical trackers that add cost, diminish land use, increase maintenance, and exclude roof-top installations. The Stationary Wide-Angle Concentrator (SWAC) PV system will provides the ...

    SBIR Phase II 2016 Department of EnergyARPA-E
  9. Retrofittable and Transparent Super-Insulator for Single-Pane Windows

    SBC: NANOSD, INC.            Topic: DEFOA0001429

    NanoSD, Inc. with its partners will develop a transparent, nanostructured thermally insulating film that can be applied to existing single-pane windows to reduce heat loss. To produce the nanostructured film, the team will create hollow ceramic or polymer nanobubbles and consolidate them into a dense lattice structure using heat and compression. Because it is mostly air, the resulting nanobubble s ...

    SBIR Phase I 2016 Department of EnergyARPA-E
  10. Retrofittable and Transparent Super-Insulator for Single-Pane Windows

    SBC: NANOSD, INC.            Topic: DEFOA0001429

    NanoSD, Inc. with its partners will develop a transparent, nanostructured thermally insulating film that can be applied to existing single-pane windows to reduce heat loss. To produce the nanostructured film, the team will create hollow ceramic or polymer nanobubbles and consolidate them into a dense lattice structure using heat and compression. Because it is mostly air, the resulting nanobubble s ...

    SBIR Phase II 2016 Department of EnergyARPA-E
US Flag An Official Website of the United States Government