You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Integrated Photonic Filters for RF Signal Processing

    SBC: OEWAVES, INC            Topic: T8

    In this Project, OEwaves Inc. and Georgia Tech propose to research and develop an RF photonic receiver front-end enabling microwave signal processing at a heterogeneously integrated photonic platform. In particular, we propose to develop a new technology for photonic microwave filters based on the new advances in silicon (Si)-based integrated photonics. In this endeavor, we will exploit the expert ...

    STTR Phase II 2020 National Aeronautics and Space Administration
  2. Wireless Networked Cryogenic and Minimum Pressure Sensors

    SBC: NANOSONIC INC.            Topic: T13

    During the NASA program, we will transition the semiconductor nanomembrane self-calibrating cryogenic and minimum pressure sensors from their current concept and prototype TRL 4-5 demonstration stage, to near-term instrumentation products of use to NASArsquo;s propulsion system facilities, other NASA instrumentation programs, academic researchers and industrial technologists. NanoSonic will again ...

    STTR Phase II 2020 National Aeronautics and Space Administration
  3. Chip-Scale THz Generator

    SBC: NEXUS PHOTONICS INC            Topic: T8

    We propose to revolutionize the field of frequency-domain THznbsp;spectrometers by developing ~5nbsp;cm3 wide-band spectrometer with improved frequency accuracy, resolution and stability. Integration will also provide significant SWaP-C advantage compared to present solutions allowing deployment in small spacecraft platforms and other applications where low SWaP is crucial.Compared to presently av ...

    STTR Phase II 2020 National Aeronautics and Space Administration
  4. Efficient CO2 and H2O Removal with Novel Adsorbentsfor Life Support Applications on Mars

    SBC: MOSAIC MATERIALS, INC.            Topic: T6

    Phase II work will build upon results of Phase I investigations into the performance of cooperative adsorbents for life-support on Mars. The work will focus on the creating of a prototype EMU unit sized to support a single person (1 kg/day of CO2 removal. Tasks in support of this effort include in depth investigations of the role of water on CO2 adsorption mechanism. Improved pellet formulations w ...

    STTR Phase II 2020 National Aeronautics and Space Administration
  5. Novel Aeroservoelastic Scaled Model Design, Fabrication, and Testing

    SBC: M4 ENGINEERING, INC.            Topic: T15

    In Phase I we demonstrated the feasibility of a novel aeroservoelastic design approach for scaled model design, and demonstrated fabrication of the resulting designs as a ground test article.nbsp; The test article from Phase I successfully replicated the scaled structural dynamic behavior, and demonstrated the integration of an instrumentation backbone based on PCB technology which allows integrat ...

    STTR Phase II 2020 National Aeronautics and Space Administration
  6. Properties Investigation of High-MON Oxidizers and MMH Blends for Use in Deep Space Exploration

    SBC: Frontier Aerospace Corporation            Topic: T9

    The REFPROP program developed by the National Institute of Standards and Technology (NIST) is a widely-used database for industrial fluid properties, including propellants used for chemical rocket propulsion.nbsp; For deep space applications, low-temperature propellants are of particular interest but accurate fluid property data was scarce or unavailable to the industry.nbsp; Recently, NASA MSFC h ...

    STTR Phase II 2020 National Aeronautics and Space Administration
  7. A Scalable Gas-Particle Flow Simulation Tool for Lander Plume-Surface Interaction and Debris Prediction

    SBC: CFD RESEARCH CORPORATION            Topic: T9

    Plume-regolith interaction during propulsive landing results in (1) the liberation of dust/debris particles that may collide and strike the landing vehicle and surrounding assets obscuring ground observation for safe landing and (2) craters that are formed on the landing surface, posing additional challenges to vehicle stability and surface operations. The Gas-Granular Flow Solver (GGFS) had previ ...

    STTR Phase II 2020 National Aeronautics and Space Administration
  8. Multi-Function Fluid Measurement System using High-Definition Fiber Optic Sensing

    SBC: LUNA INNOVATIONS INCORPORATED            Topic: T13

    Propulsion systems require rigorous and highly instrumented testing to enable a comprehensive analysis of performance and to minimize risks associated with space flight. Current testing instrumentation methods can be replaced with embedded sensor systems that are used for monitoring remote, hazardous, or inaccessible locations, while reducing cabling and power consumption. The additional informati ...

    STTR Phase II 2020 National Aeronautics and Space Administration
  9. Integrated Sensors for the Evaluation of Structural Integrity of Inflatable Habitats

    SBC: NANOSONIC INC.            Topic: T12

    The objective of the proposed NASA Sequential Phase II STTR program is to continue the development of mechanically flexible piezoresistive sensors for the measurement of long-term creep strain in inflatable habitat webbing.nbsp; During the Phase I and base Phase II programs, NanoSonic has worked with the Electronic Textiles Laboratory at Virginia Tech to demonstrate the technical feasibility of fa ...

    STTR Phase II 2020 National Aeronautics and Space Administration
  10. Enabling Technology- Reducing Greenhouse Gas Emissions and Energy Demands in the Meat Production Industry via Scaling Advanced 3D Culture Bioreactors

    SBC: Cambridge Crops, Inc.            Topic: G

    Food production, and in particular animal-derived meat products, are a major source of green-house gases, compounded by the remarkable inefficiency in biomass conversion (grain to dense muscle tissue in meat), along with growing challenges with food safety, quality and nutrition. To address this growing problem, we propose to exploit the emerging field of cellular agriculture (tissue engineering o ...

    STTR Phase I 2020 Department of EnergyARPA-E
US Flag An Official Website of the United States Government