You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. No Power Bionic Lower Extremity Prostheses

    SBC: LIBERATING TECHNOLOGIES INC            Topic: DHP16C007

    Current prosthetic feet produce much less peak mechanical power than the able-bodied foot/ankle and release only about half of the mechanical energy generated during gait. This leads to higher energy expenditure among amputees as compared to able-bodied i

    STTR Phase II 2019 Department of DefenseDefense Health Agency
  2. Multi-Physics Analysis Tool for High-Energy Gas Lasers

    SBC: Material Flow Solutions, Inc.            Topic: MDA16T001

    Based on the results of our Phase I work, one significant barrier to optimizing battery performance lies in understanding the relationship between bulk solids and particle flow properties and the flow into the die. Our hypothesis: an increase in quality batteries production can be achieved if powder preparation process can be optimized and the die filling process controlled. We feel that control o ...

    STTR Phase II 2019 Department of DefenseMissile Defense Agency
  3. SmallSat Stirling Cryocooler for BMDS (SSC-X)

    SBC: WECOSO, INC.            Topic: MDA17T003

    West Coast Solutions (WCS) proposes the development of the SSC-X Stirling cryocooler to enable the deployment of infrared (IR) payloads on small satellite platforms. We achieve extreme miniaturization (

    STTR Phase II 2019 Department of DefenseMissile Defense Agency
  4. Innovative Methodologies for Manufacturing of Lethality Test Articles

    SBC: MRL MATERIALS RESOURCES LLC            Topic: MDA17T001

    Metallic additive manufacturing (AM) is an attractive technology for the production of lethality test articles due to the potential for significantly reduced lead time and manufacturing cost. However, in order to be effective in providing accurate lethality data, the properties of the AM material have to match closely the properties of conventionally manufactured alloys found in real threat target ...

    STTR Phase II 2019 Department of DefenseMissile Defense Agency
  5. Lightweight, Stable Optical Bench with Integrated Vibration Attenuation

    SBC: SAN DIEGO COMPOSITES, INC.            Topic: MDA13T007

    The goal of this program is to design a lightweight optical bench capable of remaining stable under temperature and moisture changes, while isolating the precision optical array from vibrations such as engine noise and air turbulence. By integrating a customizable periodic stack in the bench, vibrations are attenuated more effectively than commercially available mounts. Additionally, the periodic ...

    STTR Phase II 2016 Department of DefenseMissile Defense Agency
  6. Microelectronics Component Adhesive Selection and Design Rules for Failure Avoidance

    SBC: CFD RESEARCH CORPORATION            Topic: MDA14T002

    Thermally induced fatigue and residual stress introduced during fabrication are sources of failure in microelectronics, which raises reliability concerns for MDA and its system integrators. CFDRC has teamed with experts in the reliability of microelectronics packaging to develop a physics based modeling and testing protocol to correlate material properties and thermal loading conditions to stress ...

    STTR Phase II 2016 Department of DefenseMissile Defense Agency
  7. Decision Making under Uncertainty

    SBC: GCAS, Inc.            Topic: MDA13T001

    Our proposed second order uncertainty (SOU) product is a decision making software solution that addresses the problem of providing accurate and precisely defined decision courses of action (COAs) of complex, time-constrained problems in a fraction of the time required by alternative methods striving to achieve the same level of precision. Complex decision situations can deal with large volume of ...

    STTR Phase II 2016 Department of DefenseMissile Defense Agency
  8. Weapon Inspection, Sustainment and Recorder Device

    SBC: MAINSTREAM ENGINEERING CORP            Topic: MDA14T001

    Mainstream Engineering Corporation is developing a prognostic health monitoring system for missile electronics. Called the Weapon Inspection, Sustainment, and Recorder Device (WISARD), this stamp-sized health monitoring system operates on 3.6 mW of power and measures temperature, vibration, and humidity to estimate the remaining life of an electronics assembly. In Phase I, we developed the failure ...

    STTR Phase II 2016 Department of DefenseMissile Defense Agency
  9. Real-Time Health Management Portable Sensor for Solid Rocket Motors

    SBC: PHYSICAL SCIENCES INC.            Topic: MDA14T004

    Physical Sciences Inc. (PSI) proposes to design, develop, and demonstrate a portable, non-invasive, real-time sensor to assess the chemical and physical health of solid rocket motors as a function of age without affecting the motors integrity nor having direct contact with the propellant. In Phase II, a sensor to monitor specific gas species that are markers of the chemical and mechanical aging pr ...

    STTR Phase II 2016 Department of DefenseMissile Defense Agency
  10. Enhancement of Ballistic Missile Defense System Level Simulation Operations Through Multi-core Processing

    SBC: ISSAC Corp            Topic: MDA13T003

    The ISSAC Team propose a novel method to encapsulate legacy models and simulations that allows these components to take advantage of modern, multi-core, multi-processor hardware suites. Encapsulating these legacy codes provides 3 primary advantages to deal with complex systems and systems of systems (Air Force, Navy, Department of Homeland Security (DHS), Federal Emergency Management Agency (FEMA) ...

    STTR Phase II 2016 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government